Ping i25, G25 & Anser Shaft Adaptor

Ping i25, G25 & Anser Shaft Adaptor


Ping i25, G2 & Anser Shaft Adaptor - RH .335"
$17.99
Backordered
Ping i25, G2 & Anser Shaft Adaptor - LH .335"
$17.99
In Stock

Ping i25, G25 & Anser Shaft Adaptor

The Authentic Ping shaft adaptor sleeve allows for multiple shafts to be used in the Ping i25, G25 and Ping Anser drivers and fairway woods along with the 2014 Rapture fairway wood at a fraction of the cost of re-shafting. Available in RH, .335" (Ping Logo on side) and LH,.335".

Ping i25, G25 & Anser Shaft Adaptor is rated 4.5 out of 5 by 2.
Rated 4 out of 5 by from Don't use the rubber cork I re-shafted a i25 driver using this adapter. The small rubber cork was instructed to put in the end of the graphite shaft before glueing. Unfortunately this creates a air lock when pushing in the shaft with epoxy in the collar. I had to push very hard and add a heavy weight to the shaft butt during epoxy drying. Other than that problem it screws right in with the i25.
Date published: 2016-07-29
Rated 5 out of 5 by from Great supplier Thanks just what i needed.I use Golfworks all the time
Date published: 2017-07-17
  • y_2017, m_9, d_22, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_PGC001, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will your Ping Shaft Adaptor PGC002 work with a Ping G25 driver?

Asked by: JohnGolf
No, the PGC002 adaptor will not fit the G25 driver. You need to use the PGC001 for the G25.
Answered by: JimY
Date published: 2017-09-11

is this the adapter that come with the ping 25 if you buy from a pro shop.

Asked by: rodkneerg
Yes the PGC001 shaft adaptor we sell is a stock Ping shaft adaptor. We purchase it from Ping.
Answered by: JimY
Date published: 2017-08-07

Is this the same adapter needed for the Ping i25 hybrid?

Asked by: Cnew
No, we do not have a shaft adaptor for a Ping i25 hybrid. Ping uses .355" taper tip shaft in their hybrids and there are no shaft adaptors available for their hybrids.
Answered by: JimY
Date published: 2017-08-01

What is the shaft size on the Ping adaptor??

Asked by: John
The PGC001 adaptor uses a .335" tip size shaft.
Answered by: JimY
Date published: 2017-06-19

Will a answer shaft fit a G30 head

Asked by: Tedley
The shaft from the Ping Anser will fit the G30 but the shaft adaptor from the Anser will not fit the G30.
Answered by: JimY
Date published: 2017-03-29

If I ordered the Ping adaptor for 12 deg. is it adjustable +/- 1/2 as is in my G25 Driver? I have already ordered a Kinetixx shaft and ping 12 deg. adaptor with Ping grip to be assembled by Golfworks. Just wanted to be sure I did it right..

Asked by: Richard
To make sure you did it correctly it would be best to contact Customer Service at 1-800-848-8358 and they can check the order for you.
Answered by: JimY
Date published: 2017-02-13

Hi. I'm wanting to reshaft a g25 driver with a Aldila NVS shaft. Could you tell me what tip size for this adapter? Thanks

Asked by: Jason
The PGC001 Ping shaft adaptor uses a .335" tip size shaft which will work fine with the Aldila NVS shaft.
Answered by: JimY
Date published: 2017-01-26

I would like to put a Oban Kiyoshi Shaft in my Ping Answer Driver. Is there an adapter that makes this possible. If so is it a difficult process? Thank you!

Asked by: David
You can install the Oban shaft into the Ping shaft adapter (PGC001) and it will fit into the Ping Anser driver. It is not a difficult process. It is not a difficult process at all if you have the correct tools and epoxy.
Answered by: JimY
Date published: 2016-09-26
  • y_2017, m_9, d_22, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_30
  • loc_en_US, sid_PGC001, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks