Ping ID-8 Golf Grip

Ping ID-8 Golf Grip

.600" (Rib) 51g Standard - Black/White -
In Stock
.600" (Rib) 58g +1/32" Oversize - Black/Gold -
In Stock
.600" (Rib) 65g +1/16" Oversize - Black/Orange -
In Stock
.600" (Rib) 45g 1/32" Undersize - Black/Red -
In Stock

Buy The Complete Set

Product Name
PING ID-8 BLK/GLD +1/32 Grip Kit
PING ID-8 BLK/ORG +1/16 Grip Kit
PING ID-8 BLK/RED -1/32 Grip Kit

Ping ID-8 Golf Grip

The Ping ID-8 golf grip features a great new texture for a responsive feel.

  • .600" core diameter
  • Ribbed - installed size: standard and oversize
  • Easy to use grip sizing ID for proper OEM replacement and fit

  • The Complete Set listed above includes 13 grips, grip tape, grip solvent, rubber vise clamp, grip gauge and easy to follow instructions!

Ping ID-8 Golf Grip Specifications

Ping ID-8 Golf Grip is rated 5.0 out of 5 by 7.
Rated 5 out of 5 by from Fantastic Grips These grips are absolutely amazing! Texture-wise they're about halfway between an aggressive cord grip or GP Decade and a Tour Velvet. They have a rib which is nice to slot in your fingers. Love that they come in different sizes.
Date published: 2015-08-08
Rated 5 out of 5 by from Positive Feeling I've tried a number of grips trying to acheive a soft but self, positive feeling when gripping the club. This grip did it all for me. I also with the positive feeling am sure it helped my game.
Date published: 2011-02-07
Rated 5 out of 5 by from Great Ping grip I bought an old g10 4 wood head, had an old graphite shaft pulled, and was looking for a nice, inexpensive grip to finish the club. This grip has more than met my needs. Feels good in hand, I like the decals/design, right amount of tackiness for my game. Nice grip
Date published: 2015-09-25
Rated 5 out of 5 by from Love these ribbed grips The texture of this grip is great. It is almost like a crossline grip, but with more grabbing power. Also, with the rib it feels a bit larger, which I like. I have this on all of my clubs even the clubs that aren't Ping clubs.
Date published: 2017-01-26
Rated 5 out of 5 by from Great golf grips I bought these as a replacement for my Pings tired old grips. They are great grips and would buy these again
Date published: 2016-07-07
Rated 5 out of 5 by from great products great service and products great selection and prices
Date published: 2015-07-14
Rated 5 out of 5 by from Come to Grips Shipped quick & correct! Fine transaction.
Date published: 2016-06-22
  • y_2017, m_2, d_16, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_PG0011, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

How many grips in a set?

Asked by: Willard
If you order a grip kit, you will receive 13 grips. You can order grips individually, in any quantity, if 13 is not the number you need. The kit comes with the 13 grips and the supplies you need to install. The kits price are the cost of the grips plus $8.00 for the kit supplies.
Answered by: GW2002
Date published: 2017-02-13

Before installation, I can't tell which side on the grip has the ribbed core. Is it the side opposite the the white/red lines in the rectangular box as shown in the picture?

Asked by: Helge2
Yes the rib is always on the back side of the grip or as you say the opposite side from the white and red lines and the Ping name. If you hold the grip up to a light and look through the grip from the small hole at the top end you can see the rib.
Answered by: JimY
Date published: 2016-12-12

What size is a 5L grip on Ping Irons

Asked by: Lee
The stock grips from the factory would be standard size.
Answered by: JimY
Date published: 2016-12-05

Do you have the id-8 reminder grips in aqua - 1/64" undersize

Asked by: Crowbar
No we do not have the ID-8 ribbed grip in aqua - 1/64" undersize. The aqua - 1/64" is only available in the 360 ID-8 round grip (PG0022). You could use our Grip Rib Pack (GW0017) to install you own rib using the 360 grips.
Answered by: JimY
Date published: 2016-09-30

Was wondering if these Ping grips are the same as the original ones installed on new Ping clubs? Thanks.

Asked by: Dave
These are original Ping grips. Ping does use different grips on different model clubs and we stock a few different model Ping grips. Here is the link for all the different Ping grips we stock.
Answered by: JimY
Date published: 2016-08-31

Is there a sizing chart to determine if I could benefit from a oversize grip? I am playing standard grips today.

Asked by: Mitch
We find that the grip sizing charts do not work for checking the correct grip size. If you grip one of your current clubs and then remove your lower hand and look at the top hand grip. If your middle 2 fingers are just touching the pad of your hand and the grip pressure is comfortable the grip size would be correct. If your fingers are digging into your palm the grip size is to small and if there is a gap between your fingers and palm the grip size is to large. Most golf retailers will have grip sizing samples in their stores. It could be a good idea to stop into a store and have your grip size checked.
Answered by: JimY
Date published: 2016-07-18

I have standard g-25 woods, I want to re grip to ping 360 id8 (Gold + 1/32) do I need to know the shaft diameter, do you know what the shaft diameter would be?

Asked by: golf freek
The shaft butt diameter on the G25 was listed at .600". You would have no problem installing the Golf Ping grips on the Ping shafts.
Answered by: JimY
Date published: 2016-03-21

Are these grips on sale? 12 for the price of 6............

Asked by: Robert
No the Ping grips are not on sale at this time. The grips that are currently on sale for buy 6 get 6 free can be found at this link.
Answered by: JimY
Date published: 2016-03-15
  • y_2017, m_2, d_16, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_PG0011, prod, sort_[SortEntry(order=MOST_RECENT_ANSWER, direction=DESCENDING)]
  • clientName_golfworks