Ping TiSI  Adaptors

Ping TiSI Adaptors


Ping TiSI, TEC i3 Driver Adaptor - 335 tip
$4.49
In Stock
Ping iSI Fairway Wood Adaptor - 335 tip
$4.49
In Stock

We Also Recommend

Ping TiSI Adaptors

Essential when reshafting Ping TISI and TEC i3 Drivers and ISI and i3 fairway woods - .335" tip.
Ping TiSI Adaptors is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from worked great I used this to replace my favorite drivers stiff shafts with a regular shafts since I have slowed my swing speed with age, worked great.
Date published: 2017-04-14
Rated 5 out of 5 by from Good quality Exactly what I wanted and it worked perfectly for what I needed. Thank you
Date published: 2016-04-09
  • y_2017, m_5, d_23, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_PSS, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have an old i3 3 wood that one of my high school players has broken.  I need to see if an adapter/ferrule is available for this repair?  Head has serial:  32522NM Thanks.

Asked by: Pburg coach
To get the original adaptor you would have to send the club back to Ping. This is an aftermarket adaptor that creates a standard lie and face angle.
Answered by: JimY
Date published: 2017-04-25

Will the fairway adapter fit the TISI TEC fairway wood?

Asked by: malace
The Fairway wood adaptor would fit the TiSi tech fairway woods.
Answered by: JimY
Date published: 2017-04-25

My Ping Titanium 3 wood shaft says 350 series.  Does that mean the shaft tip is ,350 and too large to use your adaptor?  

Asked by: Curt
The 30 Series shaft is a .350 tip. Even though the PSS is designed for a .335, there should be enough material that you could carefully drill out the adaptor to accept the .350 shaft.
Answered by: GW2002
Date published: 2017-04-07

what is the tisi adaptor for

Asked by: ken
The PSS was a replacement adaptor for the TiSi driver. The adaptor installed into the clubhead and the shaft was installed into this adaptor. Here is a link to a You Tube video where you can see the installation of this PSS adaptor. https://www.youtube.com/watch?v=lICMsoTnDAQ
Answered by: JimY
Date published: 2017-03-27

i just bought 4 of these from you guys , and i dont think i can use them they look different than the originals i have a Ping tsi tec 5 and 3 wood ,the originals look more curved at the shaft end  did i buy the right ones ??  

Asked by: legendjoe
The PSS is an aftermarket adapter for the Ping woods that does have a different design then the stock Ping adaptor. Ping never made there adaptors available for sale. Ping also used different adaptors to adjust lie and face angle. There is a 3 letter code on the side of the adaptor that you could look up on Ping's web site to see what the lie and face angle of you clubs were. These aftermarket adaptors only create a standard lie and face angle.
Answered by: JimY
Date published: 2017-03-10

will this adapter work in a Ping i 3 driver C20389S

Asked by: rforbis
Yes the PSS will fit the i3 Ping driver.
Answered by: JimY
Date published: 2016-12-12

Will this adapter work for a shaft with a tip diameter of .350?

Asked by: DCorsi
It is size for a .335" tip diameter shaft but you should be able to carefully drill it out to accept a .350" tip diameter shaft. To me there is enough material to do this.
Answered by: JimY
Date published: 2016-10-10

Do you have a RS3 ping shaft adapter for a  Ti Si T Tech 3 wood

Asked by: Larry
The RS3 was Ping's code for that particular face and lie angle. The aftermarket adaptors we sell will only create a standard lie and face angle.
Answered by: JimY
Date published: 2016-07-25
  • y_2017, m_5, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_PSS, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks