Project X Graphite Hybrid Shaft

Project X Graphite Hybrid Shaft


5.0 - 370 tip (84g) 3B2M
$29.99
In Stock
5.5 - 370 tip (85g) 3.5B1M
$29.99
In Stock
6.0 - 370 tip (92g) 4C1M
$29.99
In Stock
6.5 - 370 tip (95g) 5C1H
$29.99
In Stock
7.0 - 370 tip (97g) 5.5C1H
$29.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Project X Graphite Hybrid Shaft

The Project X graphite hybrid shaft's bend profile and stability enhancement was designed to produce directional and distance dispersion.

Features:
  • .355" and .370" tip diameters available
  • Stiffness profile matches Project X steel iron shafts
  • Weight provides the perfect transition from iron shafts to wood shafts

Trimming Instructions

Project X Graphite Hybrid Shaft Specifications

Not Found.

I am interested in the 7,8,and 9 hybrid. Please email and let me know your phone number.

Asked by: Ivan
You can call 800-848-8358. For a 7,8 and 9 hybrid, using the Project X Hybrid shaft, you can only trim 1.5" from the tip, then after installation, you would trim to final playing length from the butt end of the shaft. The normal trimming only goes to a 24 degree hybrid. The shaft only has a 3" parallel tip section length so for the higher numbered hybrids, you would trim the mas amount from the tip, which in this case is 1.5 inches.
Answered by: GW2002
Date published: 2017-09-21

I have project x 5.0 steel shafts in my irons, looking to replace the graphite shafts in my hybrids with these project x graphite hybrid shafts. Looking at the MPF, the 5.5 graphite hybrid matches up with the 5.0 steel. Is that correct?

Asked by: WactownJB
The 5.0 is the regular flex and the 5.5 is in between the R and S flex. You may want to use the 5.5 in your hybrid. To me that becomes a fitting preference. Personally if I were playing 5.0 in my irons I would play the 5.0 in the hybrid. But that is what would fit me.
Answered by: JimY
Date published: 2017-09-13

is the pro 5/6 shaft senior shaft

Asked by: jim
In the Project X Hybrid shafts the 5.0 flex is the Regular flex. They did not make a Senior flex in this shaft.
Answered by: JimY
Date published: 2017-08-17

Will these work with the Maltby ST-i Iron Heads .370?

Asked by: kyleP
Yes the Project X Hybrid shafts are .370" tip size and will fit the STi irons heads.
Answered by: JimY
Date published: 2017-08-03

To JimY-I used the Product X 5.0 lite senior shafts in my woods w a high trajectory. Which shaft in MPF series hybrid A flex would have a high trajectory-and be light not heavy? and which shaft for my Pings in Paderson would have a high trajectory.

Asked by: heathandholl
In the MA0250 the A flex is designed to create a mid/high trajectory. The Paderson A flex (PK0105) shaft is designed to produce a high trajectory. Both shafts could work well.
Answered by: JimY
Date published: 2017-06-26

To Jim Y, Jim Y- I used the Project X 5.0 lite senior shafts in my woods w a high trajectory.Which shaft in MPF Series Hybrid A Flex (Ma0250). Would have a high trajectory? And which shaft for my Pings in Paderson would have a high trajectory as well

Asked by: heathandholl
In the MA0250 the A flex is designed to create a mid/high trajectory. The Paderson A flex (PK0105) shaft is designed to produce a high trajectory. Both shafts could work well.
Answered by: JimY
Date published: 2017-06-26

I put 5.0 lite senior shafts with low flex points in my Taylor Made M2 driver and woods. Which shaft is comparable  for my M2 hybrids?  Also would that shaft fit in a Ping   G15 hybrid as well? 

Asked by: heathandholl
To JimY-I used the Project X 5.0 lite senior shafts in those woods with a high trajectory. Which shaft in MPF series Hybrid A flex would have a high trajectory. Also which shaft for my Pings in Paderson would have a high trajectory. Also looking for light-not heavy shafts. I am a female.
Answered by: heathandholl
Date published: 2017-06-27

Will the Hybrid Project X 6.0 shaft fit in my Nickent 3DX Hybrid? Please let me know thank you guys so much and sorry for the hassle!

Asked by: Bristol
The .370 tip Project X graphite 6.0 hybrid shaft should fit the Nikent 3DX Hybrid.
Answered by: GW2002
Date published: 2017-08-03
  • y_2017, m_9, d_24, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_en_US, sid_TT0063, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks