Project X Pxi Taper Tip Iron Shafts

Project X Pxi Taper Tip Iron Shafts


Pxi 5.0 - 36.5" Wedge, .355" tip - (100gm) 3C1H -
$39.99
In Stock
Pxi 5.0 - 38.5" #6 Iron, .355" tip - (100gm) 3C1H -
$39.99
In Stock
Pxi 5.0 - 39.0" #5 Iron, .355" tip - (100gm) 3C1H -
$39.99
In Stock
Pxi 5.0 - 40.0" #3 Iron, .355" tip - (100gm) 3C1H -
$39.99
In Stock
Pxi 5.0 - 40.5" #2 Iron, .355" tip - (100gm) 3C1H -
$39.99
In Stock
Pxi 5.0 - 41.0" #1 Iron, .355" tip - (100gm) 3C1H -
$39.99
In Stock
Pxi 5.5 - 41.0" #1 Iron, .355" tip - (105gm) 3.5C1H -
$39.99
In Stock
Pxi 6.5 - 37.5" #8 Iron, .355" tip - (115gm) 5C1H -
$39.99
In Stock
Pxi 6.5 - 38.0" #7 Iron, .355" tip - (115gm) 5C1H -
$39.99
In Stock
Pxi 6.5 - 38.5" #6 Iron, .355" tip - (115gm) 5C1H -
$39.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Project X Pxi Taper Tip Iron Shafts

Project X Pxi Taper Tipped Iron Shafts

Features:
  • Provides greater distance by virtue of reduced weight properties.
  • Tour caliber spin control and tip stability in a lightweight package hallmarks of the Project X franchise.
  • Improved feel through optimized butt to tip stiffness calibration

  • .355 tapered tip diameter

Trimming Instructions

 Project X Pxi Shaft Specifications

Not Found.

Which shaft tip size and shape used in Bridgestone J36 pocket cavity irons?  Thanks.

Asked by: Buddy13
The Bridgestone J36 Pocket Cavity irons use a .355" taper tip shaft.
Answered by: JimY
Date published: 2017-07-31

this shaft is Steel shaft?

Asked by: jesi
Yes the Project X Pxi shafts are steel shafts with a brushed finish.
Answered by: JimY
Date published: 2017-07-18

What Project X PXi shaft flex is equal to a DG R300 shaft?

Asked by: raddad
In the Pxi the 5.0 would be the R flex or closest to the DG R300.
Answered by: JimY
Date published: 2017-01-04

Can I put a 37" shaft of a 9 iron Into a pitching wedge that uses a 36"1/2 ?

Asked by: Smegan68
Yes you can use the 9 iron shaft in the PW. It will make it play just slightly stiffer which should not create a problem with the PW.
Answered by: JimY
Date published: 2017-03-11

Hi When will the PXI 6.0 40 and 39.5" shafts be back in stock?

Asked by: Ron
We have discontinued the Project X Pxi shafts and will not be getting these back in stock. They are still shown on Royal Precisions web site so we should be able to special order these shafts for you. You will need to contact our Customer Service Department at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2016-09-06

Hi! The length of the shaft provided; is that the club length when installed on the iron? I want a 3 iron shaft with final club length 40".

Asked by: kaarby
In the Project X Pxi shafts the 40" raw length shaft is the 3 iron shaft. You will install the shaft and butt cut to your 40" finished length. Depending on which irons you play a 40" raw length shaft will produce a finished length of 41" to 41.25" in most iron head designs. You will need to butt cut to your 40" finished length.
Answered by: JimY
Date published: 2016-07-07

Hi, do these pxi shafts come in a parallel tip ?

Asked by: Craigd
No, the Project X Pxi iron shafts were only manufactured with a .355" taper tip. You can use a SHIM15 to shim into a .370" hosel bore. http://www.golfworks.ca/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2016-04-29

I currently play DG S300 and I want the PXi to replace my 4 and 5 iron. What flex and length that I need to buy. Thank you. 

Asked by: Andy
The 6.0 flex PXi iron shafts would be similar in flex to the DG S300 shafts. These shafts are discontinued so the #5 iron shaft is no longer available. You could purchase the #3 (40") and the #4 (39.5") shafts and simply put the 40" shaft in the #4 iron and the 39.5" shaft in the #5 iron. This would result in a flex that is about 1/4 flex softer than the intended flex which isn't that noticeable and often preferred in the longer irons.
Answered by: Admin
Date published: 2016-04-16
  • y_2017, m_10, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_TT0085, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks