Project X Rifle Steel Iron Set

Project X Rifle Steel Iron Set


Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Project X Rifle Steel Iron Set

The Project X Rifle steel iron shaft produces a slightly higher launch angle and penetrating flight pattern. (Services reflect set pricing)

Features:
  • .355" and .370" tip diameters available
  • Features a long taper rate that actually achieves a more dynamic transfer of shaft energy to the ball.
  • Sold as set #3-PW

Trimming Instructions

Project X Rifle Steel Iron Set is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from THE shaft for low handicappers This shaft is one of the best feeling shafts on the market. If you are truly looking for a high performance shaft, this is the one you want! Feels like no other shaft on the market and also performs like no other! Do yourself a favor and try these shafts. You will never go back to any other!
Date published: 2007-10-13
Rated 5 out of 5 by from Best on market!!! Best shaft ever. I have the Flighted 6.0 and the feeling is so good and so smooth that you will loved! You have to tri it!!!
Date published: 2007-10-18
  • y_2017, m_2, d_27, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_RPXISET, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

The difference between  the 335 and  370

Asked by: Hobie16
In the Rifle shafts there was no difference in the playability of the .355" taper tip and .370" parallel tip. All Rifle shafts are initially made as a .370" parallel tip shaft and once they were set up for club number and frequency they would put a the shafts back in a machine to give them a .355" taper tip. The shafts were easier to frequency match when they were initially made as a .370" parallel tip. With other shafts the playing characteristics between .355" taper tip and .370" parallel can vary. Dynamic Gold's will play a little bit different between the .355" and .370".
Answered by: JimY
Date published: 2017-01-30

What's the weight of project X 5.5

Asked by: Fearless
They are listed at 115 grams. You can see all the specifications for these shafts by scrolling down the page at this link to the specifications box. http://www.golfworks.com/project-x-rifle-steel-iron-set/p/TRPXISET/
Answered by: JimY
Date published: 2016-07-06

I'm looking at Project X (non flighted) 5.5 iron shafts @115g for 3-PW.  I want the shafts uncut, but do not see a way to get them into the cart for checkout.  

Asked by: Greg Snowden
You need to use the code TRPXISET. You will find them at this link. http://www.golfworks.com/product.asp_Q_pn_E_TRPXISET
Answered by: JimY
Date published: 2016-01-19

Hello! I`interesting in project rifle shaft. My club head speed is about 85 mph, so  which shaft is best for me 5,0 or 5,5? regards: Juha Kaunisto

Asked by: citizen kane
If 85 mph is your driver swingspeed then Royal Precision would recommend the 5.0 flex. If the 85 mph is your 5 iron swingspeed then they would recommend the 5.5 flex.
Answered by: JimY
Date published: 2015-09-06

What're recommended swing sped ranges for the project x 6.0 and 6.5. Would alsolikethe same info for the matrix white tie x and s flexes. 

Asked by: Karp
Swing speed guidelines for the 6.0 is 95-110 mph. 6.5 would be 110+. Both of those frequencies are for players with very quick and aggressive swing characteristics. The Ozik X4 White Tie stiff flex would be recommended for players in the 90-100 mph swing speed. The X flex would be best suited at swing speeds of 110 +
Answered by: Kevin F
Date published: 2015-04-09

I play the x100 in my ping irons, how does the PX 6.5 compare? Is this a shaft I could play? I'm a High ball hitter which I like and my 7 iron as is 88 ish....... Thsnks

Asked by: johnny201
The PX 6.5 is the flex equivalent to the Dynamic Gold X100. the flex should fit you well
Answered by: Kevin F
Date published: 2015-04-09

I play x100 in My ping i20 irons, looking at a set of callaway x forged irons but they have project x 6.5 in them. I'm around 110ish mph with my 7 and have an average carry of 165, just curious if these shafts would work for me.... Thank you 

Asked by: johnny201
The Project X 6.5 is equivalent to your Dynamic Gold X100 shaft flex.The Project X should perform well for you.
Answered by: Kevin F
Date published: 2015-04-06

Hi what would be the benefits of fitting project x 6.5 shafts to my ping g20 irons over the standard shafts ? regards Thomas Calvert ,COCKATOO AUSTRALIA.

Asked by: TOMMO
The stock steel shaft from Ping in the G20 irons was listed as the CFS which compared to the Project X 6.5 is approximately 10 grams lighter in weight and designed to produce a higher ball flight. The Project X is designed to produce a lower ball flight. If using a heavier shaft that flights the ball lower would be a benefit to you over the stock shaft then the Project X could be a benefit to you.
Answered by: JimY
Date published: 2015-02-24
  • y_2017, m_2, d_28, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_RPXISET, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks