Project X Rifle Steel Iron Set

Project X Rifle Steel Iron Set


5.0 Flex - #3-PW SET .355 tip (115g) - 3.5B1M
$311.99
In Stock
5.5 Flex - #3-PW SET .355 tip (115g) 4B1M
$311.99
In Stock
6.0 Flex - #3-PW SET .355 tip (120g) - 4.5B1M
$311.99
In Stock
6.5 Flex - #3-PW SET .355 tip (125g) - 5B1M
$311.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Project X Rifle Steel Iron Set

The Project X Rifle steel iron shaft produces a slightly higher launch angle and penetrating flight pattern. (Services reflect set pricing)

Features:
  • .355" Tip Diameter
  • Features a long taper rate that actually achieves a more dynamic transfer of shaft energy to the ball.
  • Sold as set #3-PW

Trimming Instructions

Not Found.

hi have purchased a 12 month old set of apex pro irons with project X 6.5 shafts.my swing speed shaft is normally 5.5.the club set is 4 iron thu to an including lob wedge (total 9 irons)can you supply me with the set above to australia.if yes how much?

Asked by: rob
Yes we do have the shafts. At this link you will see the Project X shafts individually and it shows them in Australian pricing. You can order from this site or you can contact our International Trade Accounts manager Donna Ours at dours@golfworks.com and she can help you with your order and pricing. https://www.golfworks.com/project-x-rifle-taper-tip-iron-shafts/p/RP0009I/
Answered by: JimY
Date published: 2017-08-29

I have project X 6.0 shafts in my irons now and I've been wanting to make my 3-6 irons all the same length. My question is, can I just cut the butt of the clubs down to match my 6 iron?

Asked by: Jonesy
Single length irons use the same shaft for each iron in the set. Generally the manufacture uses the 6 or 7 iron shafts for each club depending on if the clubs are being made to a 6 or 7 iron length. If you cut the existing shafts down to 6 iron lengths the shafts will have to be built up to create standard grip sizes to match the grip sizes on your 7 iron through wedges. Keep in mind iron heads that are used for single length irons all weight the same and have the same lie angles. You are going to have different swingweights because of different clubhead weights and different lie angles with your 3 through 6 irons.
Answered by: JimY
Date published: 2017-08-21

Hi, would these fit the "maltby-te-forged-irons/p/MA0099/"? I am playing this club with TT-SCORE-LT (bought a MALTBY-PAK) shaft, think these are 0.370, and want to test another shaft. How to downsize shaftdiameter ?

Asked by: Hjalmar
The Maltby TE Forged irons have a Universal Hosel design and you can use either .370" parallel tip or .355" taper tip shafts like the Project X Rifle shafts. If you would like you can use the SHIMT (.355" - .370") shims to center the tip of the .355" taper tip shafts into the TE Forged irons. https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2017-08-10

I have a 6 iron swing speed of 78 what flex should I order in the Project X rifle?

Asked by: Ed M
Royal Precision referenced an iron swingspeed between 70 and 80 mph would use a 5.0 flex.
Answered by: JimY
Date published: 2017-09-05

Will these shafts fit a Ping G30 iron head?

Asked by: ajgolf
Yes the TRPXISET Project X shafts will fit the Ping G30 irons.
Answered by: JimY
Date published: 2017-10-04

Hello, I have just ordered this set of shafts and I want to clarify how to install these iron shafts. I am having difficulty figuring out the trimming document. Do I cut anything off of the tip on these shafts, or do I only butt trim these shafts?

Asked by: ajgolf
The Project X shafts are a .355" taper tip shaft and you do not tip trim a .355" taper tip shaft. You will install these shafts and cut to length from the grip end to your finished length.
Answered by: JimY
Date published: 2017-07-21

Is the 5.0 flex comparable to a regular flex shaft or senior flex?

Asked by: TWR
No, 5.0 is between an R and S flex. Royal Precision does not make a Senior flex in the Project X shaft or what we would call a true R flex. If you soft step the 5.0 by putting the 3 iron shaft into the 4 iron you will change the 5.0 to approximately a 4.6 to 4.7 flex.
Answered by: JimY
Date published: 2017-09-05

Can I soft step Project Rifle Shaft 5.0, they are a tough shaft like the feel but my swing is not as powerfully before Thanks Lenny.

Asked by: Lenny
Yes you can soft step the Rifle shafts. Soft stepping one shaft will soften the flex approximately 3 to 4 cpm's or drop the 5.0 down to 4.6 to 4.7.
Answered by: JimY
Date published: 2017-09-05
  • y_2017, m_10, d_22, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_US, sid_TRPXISET, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks