Project X Rifle Taper Tip Iron Shafts

Project X Rifle Taper Tip Iron Shafts


Project X, .355" - 5.0 #2 Iron -
$38.99
In Stock
Project X, .355" - 5.0 #3 Iron -
$38.99
In Stock
Project X, .355" - 5.0 #4 Iron -
$38.99
In Stock
Project X, .355" - 5.0 #5 Iron -
$38.99
In Stock
Project X, .355" - 5.0 #6 Iron -
$38.99
In Stock
Project X, .355" - 5.0 #7 Iron -
$38.99
In Stock
Project X, .355" - 5.0 #8 Iron -
$38.99
In Stock
Project X, .355" - 5.0 #9 Iron -
$38.99
In Stock
Project X, .355" - 5.0 Wedge -
$38.99
In Stock
Project X, .355" - 5.5 #1 Iron -
$38.99
In Stock
Project X, .355" - 5.5 #2 Iron -
$38.99
In Stock
Project X, .355" - 5.5 #3 Iron -
$38.99
In Stock
Project X, .355" - 5.5 #4 Iron -
$38.99
In Stock
Project X, .355" - 5.5 #5 Iron -
$38.99
In Stock
Project X, .355" - 5.5 #6 Iron -
$38.99
In Stock
Project X, .355" - 5.5 #7 Iron -
$38.99
In Stock
Project X, .355" - 5.5 #8 Iron -
$38.99
In Stock
Project X, .355" - 5.5 #9 Iron -
$38.99
In Stock
Project X, .355" - 5.5 Wedge -
$38.99
In Stock
Project X, .355" - 6.0 #1 Iron -
$38.99
In Stock
Project X, .355" - 6.0 #2 Iron -
$38.99
In Stock
Project X, .355" - 6.0 #3 Iron -
$38.99
In Stock
Project X, .355" - 6.0 #4 Iron -
$38.99
In Stock
Project X, .355" - 6.0 #5 Iron -
$38.99
In Stock
Project X, .355" - 6.0 #6 Iron -
$38.99
In Stock
Project X, .355" - 6.0 #7 Iron -
$38.99
In Stock
Project X, .355" - 6.0 #8 Iron -
$38.99
In Stock
Project X, .355" - 6.0 #9 Iron -
$38.99
In Stock
Project X, .355" - 6.0 Wedge -
$38.99
In Stock
Project X, .355" - 6.5 #1 Iron -
$38.99
In Stock
Project X, .355" - 6.5 #2 Iron -
$38.99
In Stock
Project X, .355" - 6.5 #3 Iron -
$38.99
In Stock
Project X, .355" - 6.5 #4 Iron -
$38.99
In Stock
Project X, .355" - 6.5 #5 Iron -
$38.99
In Stock
Project X, .355" - 6.5 #6 Iron -
$38.99
In Stock
Project X, .355" - 6.5 #7 Iron -
$38.99
In Stock
Project X, .355" - 6.5 #8 Iron -
$38.99
In Stock
Project X, .355" - 6.5 #9 Iron -
$38.99
In Stock
Project X, .355" - 6.5 Wedge -
$38.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Project X Rifle Taper Tip Iron Shafts

The Project X Rifle steel iron shaft produces a slightly higher launch angle and penetrating flight pattern.

Features:
  • .355" tip diameter
  • Features a long taper rate that actually achieves a more dynamic transfer of shaft energy to the ball
  • Available in individual lengths #1 iron through #W

Trimming Instructions

Project X Rifle Taper Tip Iron Shafts is rated 4.7 out of 5 by 6.
Rated 5 out of 5 by from Smooth accurate and powerful. For my KING Forged TEC Irons, I replaced KBS Tour 110g stiff with Project X 5.5 shafts. I also installed sensicore dampening inserts and had the shafts SST pured. Clubs feel FANTASTIC. Contact feels like butter. Everything came off soft yet with authority. im a full club stronger and more importantly, very accurate compared to the KBS shaft. It took the front 9 to rediscover distances. Very happy with the results.
Date published: 2017-01-01
Rated 4 out of 5 by from Project X Rifle Flighted 6.0 Changed from Dynamic Gold S300 to the 6.0 Rifle Flighted. Good quality shafts, stiffer than my DG S300's. Spined them and there were some shafts with a mild spine and some with a more prominent spine. Overall a good shaft, haven't played them long enough to have a feel regarding the trajectory.
Date published: 2013-06-06
Rated 4 out of 5 by from Project X Rifle Shaft 5.0 My only complaint is that the golf works didn't offer the 4.0 or the 4.5 shaft. My opinion is that unless you are a low handicap player and strong the 5.0 version is too strong of a shaft for most of us...! Would I recommend this product? Yes but the correct shaft number for the average player.
Date published: 2015-10-26
Rated 5 out of 5 by from Quick & Efficient Needed a 5 iron shaft ASAP - ordered on a Sunday afternoon, received it on Wednesday and in my bag for a tournament on Thursday. Fast shipping and very simple to order. will come here again to order any shafts.
Date published: 2015-08-12
Rated 5 out of 5 by from Best shafts on the market. You can really feel the shaft release at impact. Have them in woods irons wedges. 6.0 stiff.
Date published: 2015-11-12
Rated 5 out of 5 by from Best on the market Added these shafts to some Maltby blade heads and "look out", sweet ,sweet!
Date published: 2016-08-04
  • y_2017, m_2, d_23, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_RP0009I, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I just bought a set of Taylor made psi irons they have kbs shafts in them I want to put in project x shafts in them what ones can I use

Asked by: Rodnay
The Taylor Made Psi irons use a .370" parallel tip shaft so to install the Project X steel shafts, which are .355" taper tips, you will need to shim the shafts to properly fit the hosel. Our SHIMT (.355" - .370") works well for this assembly. https://www.golfworks.ca/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2017-02-20

Do you sell the 7.0 flex?

Asked by: Jow
We do not stock the Project X in a 7.0 flex. We can special order them for you. You would need to contact our Customer Service Department at 1-800-848-8358 or by email at golfworks@golfworks.com and they can help you.
Answered by: JimY
Date published: 2017-01-23

I'm looking at upgrading the shafts on my current Taylor Made RSi Iron set.  Will these Project X Tapered tip shafts work?

Asked by: JCG
The Taylor Made RSi irons use a .370" tip diameter shaft. To install the Project X shafts you will need to shim the .355" taper tip shaft to properly fit the .370" hosel bore. Our SHIMT works well for this assembly. http://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2017-01-23

I have bought a set of project x shaft for my Mizuno Mp52 Irons. what would be the standard trimming instructions for the irons

Asked by: Chris
The Project X steel iron shafts being a .355" taper tip are a butt cut only shaft design. Install the proper shaft into each iron and butt cut to your finished length.
Answered by: JimY
Date published: 2016-12-28

Do I need parallel or taper tip project x shafts for Nike V irons

Asked by: Chris
It can depend on which Nike V irons you have. The Vapor Speed irons are a .370" tip size the the Vapor Pro's are a .355" taper tip. Here is a link from our web site where you can look up your irons. http://www.golfworks.com/images/art/Nike.pdf
Answered by: JimY
Date published: 2016-12-23

Is the project x rifle taper tip the right shaft tip for Mizuno MP 52 clubs

Asked by: Chris
Yes the MP 52 irons use a .355" taper tip.
Answered by: JimY
Date published: 2016-12-21

What is the stiffness equal of a project x 6.0 as compared to the dynamic gold shaft

Asked by: Chris
From our test data the DG X100 test almost identical to the Project X 6.0.
Answered by: JimY
Date published: 2016-12-21

Hi... please can you advise as to the grams of the 5.0 Project X Precision shaft.

Asked by: Warren
The Project X 5.0 flex shafts weight 115 grams. At this link scroll down the page to the specification box and you can see all the specifications for the Project X iron shafts. http://www.golfworks.com/project-x-rifle-taper-tip-iron-shafts/p/RP0009I/
Answered by: JimY
Date published: 2016-12-20
  • y_2017, m_2, d_23, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_50
  • loc_en_US, sid_RP0009I, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks