Rhino rip Grip Cutter

Rhino rip Grip Cutter

Rhino Rip Grip Cutter
In Stock
Replacement Blades pkg. of 3
In Stock
Rhino Rip - Bench Mount Tool
In Stock

Rhino rip Grip Cutter

The Rhino Rip is faster and safer than any other grip removing tool. The Rhino Rip will quickly remove rubber, cord, polymer and leather grips. Safe to use on steel and graphite clubs. Long lasting blade will remove hundreds of grips.
Rhino rip Grip Cutter is rated 4.8 out of 5 by 14.
Rated 2 out of 5 by from A little frustrating I bought a second Rhino Rip thinking that the problems with the first one was just a fluke. However, the second gave me the same problems. The hook blade broke easily if any slightly harder pressure was applied to a grip. But the real problem came when I tried to replace the blade. I unscrewed the little screw that holds the blade in place and when I went to add the new blade, the holes did not line up so when I tried to put the screw back in, it would only go halfway. I will try once more but I will probably try to enlarge the hole in the blade a tiny bit by drilling through it. When it works it does a fine job, replacing the blades has been frustrating
Date published: 2015-06-23
Rated 5 out of 5 by from Great Tool and Easy To Use . This tool is a genius design your hands remain at a safe distance and it cuts through old golf grips like a knife going through butter. I placed the tool on the side of the grip and gently pushed the Rhino Rip Grip Cutter right on through the grip to the butt end of the golf club grip. Then I just pealed back the old grip to expose the old grip tape. Quick and easy makes regripping golf clubs a breeze.
Date published: 2011-09-15
Rated 5 out of 5 by from Wonderful Idea I have been using standard utility knives to cut away old grips without any incident. That was until this last weekend when in a split second something went wrong and I ended up with a nasty cut. I order this item the next day. Have used it twice since and have found it to be incredibly simple in design but equally incredible in performance and safety.
Date published: 2014-05-17
Rated 5 out of 5 by from A Must Have Tool for Re-gripping Clubs! It's a great tool to rip open old grips with ease. I have used it to remove old grips from my clubs (woods and irons) without any fear of scratching the shafts. I would strongly recommend this tool if you are planning to re-grip your clubs.
Date published: 2015-06-26
Rated 5 out of 5 by from Avoid hospital and cut away Ok I use to use a hook blade and pull it down the grip...and eventually into my wrist. Now I use this and push away... imagine the genius of that. Don't be like me, buy this tool before you cut yourself.
Date published: 2015-08-01
Rated 5 out of 5 by from Perfect An excellent tool for anyone who ever re-grips clubs. Clearly safer, much easier and very durable. So simple. Nice work and Thank You.
Date published: 2012-06-02
Rated 5 out of 5 by from If you regrip, this tool is a must have The product works like a charm and it's well made. It even included an extra blade when I purchased it.
Date published: 2017-02-03
Rated 5 out of 5 by from Club Maker Awsome Tool (The Rhino Rip) Its Faster, Easier, and most importantly, Safer..(A Must Have)
Date published: 2008-02-29
  • y_2017, m_3, d_21, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_RR0001, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have one that is defective, how do I replace it?

Asked by: Dave
You need to contact Customer Service at 1-800-848-8358 or by email at golfworks@golfworks.com and they can help you with this.
Answered by: JimY
Date published: 2017-02-02

where is description of bench mount tool for Rhino grip rmover

Asked by: bob
Here is the link for the Bench Mount Tool with a picture showing how it is used. http://www.golfworks.com/rhino-rip-bunch-mount-tool/p/RR0003/
Answered by: JimY
Date published: 2017-01-19

Does the initial tool come with spare blades, or must you buy them initially.

Asked by: dbdors
It comes with a blade installed and an allen wrench for changing the blade but it does not come with a spare blade.
Answered by: JimY
Date published: 2016-12-23

What size is the set screw I dropped it replacement size for Rhine grip cutter would be very helpful. Thanks

Asked by: Stew
The size of the set screw is a 4-48 x ¼ Socket set Screw
Answered by: Brent Dill
Date published: 2016-09-22

what type and size tool do I need for replacing the blades?

Asked by: tom
The wrench to replace the blades comes with Rhino Rip grip cutter. The blades can be ordered here - http://www.golfworks.com/rhino-rip-grip-cutter/p/RR0001/
Answered by: Admin
Date published: 2016-04-15

how many grips can you replace on one blade

Asked by: ripper
We do not have a number as to just how many grips you will be able to cut off with one blade. But it will last you quite a while. It will do multiple sets of clubs.
Answered by: JimY
Date published: 2016-03-30
  • y_2017, m_3, d_20, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_RR0001, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks