Search Results

Tool Specials

Viewing 1 - 111 of 111

The GolfWorks Industry Standard Grip Tape

The industry standard tape for installing slip-on or leather grips.

The GolfWorks Maximum Strength Tour Set Plus Epoxy

Formulated to match the peel and shear strength of premium 3M(r) epoxies only with more elastic qualities specifically needed for proper golf club head/shaft adhesion, at about half the cost.

Maltby Portable Master Gripping Station

The most complete gripping station available. Integrated unit that allows you to grip / regrip clubs at one station, with everything you need close at hand - Please Note: Additional shipping charges required due to weight.

The GolfWorks Maximum Strength High Impact Epoxy

The Maximum Strength High Impact epoxy is formulated for the high volume clubmaker to gel in approximately 1 hour. NOTE: An Epoxy Gun and 2:1 Plunger are required for proper dispensing.

Steel Shaft Butt Extensions

Use these steel shaft butt extensions to extend steel shafts for increased club lengths.

Graphite Shaft Extensions

The GolfWorks offers graphite extensions for standard or ultralite shafts.

Maltby Design Floor Mount Gripping Station

The most complete gripping station available. Integrated unit that allows you to remove and install grips at one station.- Please Note: Additional shipping charges required due to weight.

Universal Golf Shaft Extensions

The Universal Shaft extensions will work with almost any steel or graphite shaft.

The GolfWorks Gripping Station

Save valuable time and improve consistency of your regrips with the GolfWorks all inclusive Gripping Station.

Hosel Honing Wire Brush

The easiest way to clean out hosels. Just insert into a drill for best results

The GolfWorks Maximum Strength Quick Set Epoxy

The GolfWorks Maximum Strength Quick Set Epoxy is the ONLY 5 minute epoxy available recommended for standard club assembly

Value Shaft Extractor

Ideal for the hobbyist or small repair shop to properly extract graphite golf shafts

Pressurized Golf Grip Remover

Quick, easy way to remove a large number of reusable golf grips!

Quick Grip Kit

The safest and easiest way to install rubber grips!

Maltby Design Golf Shaft Deflection Board

Shaft manufacturers employ various methods of measuring shaft flex, and some shaft models vary in flex considerably from shaft to shaft.

The GolfWorks V-Groove Grip Remover

Safely removes grips from any golf club allowing the grip to be re-used.

The GolfWorks High Strength Epoxy

This high-impact, high-strength epoxy is specifically formulated for clubmakers

The GolfWorks Economy Swingweight Scale

Inexpensive Tool to Measure swingweight quickly and accurately.

Golf Club Curing/Display Rack

A great addition to any shop or den for displaying golf clubs!

Maltby Golf Club Gauge

The only way to accurately measure golf club specifications

Sharpie Mini Marker 4 Pack

Ideal for marking raw shafts to be cut and of course, for marking golf balls!

The GolfWorks 18mm x 36yd Grip Tape

The industry standard tape for installing slip-on rubber, synthetic or oversized putter grips.

The GolfWorks Grip Saver

A must have tool for removing shaft rattles and adding powdered weight down a golf shaft.

The GolfWorks V-Line SwingWeight Scale

Measures swingweight quickly and accurately.

Epoxy Mixing & Dispensing Gun with 1-1 & 2-1 Plungers

Easy and Consistent Dispensing of All 50ML Epoxy.

Electric Heat Gun

A great value! Complete kit for safely heating golf clubs for shaft extraction.

Long & Belly Putter Shaft Extension

Converts any standard putter shaft into a belly or long putter shaft.

Maltby Heavy Duty Professional Lie Fitting Board

The oversized dimensions of 14" wide by 233/4" in length make this the most durable and reliable lie fitting board available.

The GolfWorks Brass Adaptor Shims

This is, without question, the best solution to fitting shafts into larger hosels. Keep a selection in your toolbox and you'll never be without a solution!

Double Spool Tape Dispenser

A dispenser to handle 2 sided grip tape and build-up tape

Maltby Design Economy Bounce Gauge Kit

A great tool for measuring the bounce of any iron quickly and accurately.

Plunger Can

A handy tool used in large number of professional clubmaker's shops.

The GolfWorks Quick-Grip - Grip Installer

The GolfWorks Quick Grip is a must have tool for any repair shop.

Maltby Iron/Hybrid Bending Machine Floorstand

Maltby Iron/Hybrid Bending Machine Floorstand

Pro Lever-Action Shaft Holder

Use the Pro Lever-Action for quick and secure clamping during re-gripping.

Clubmakers Vise Multi-Purpose Jaw Set

A complete set of hold-tight jaws that will secure the shaft no matter what clubmaking or repair task you are performing.

The GolfWorks Solvent Catch Pan

No more grip solvent splattering on the workbench and the floor!

The GolfWorks Regrooving Tool

Deepen or restore worn scoring lines with the New GolfWorks Regrooving Tool.

Rubber Tungsten Swingweight Tape

Rubber Tungsten Swingweight Tape - 10 Pack.

Rubber Shaft Clamp

This clamp is an absolute necessity for safely securing clubs into a vise for re-gripping and re-shafting.

Clubmakers Universal Vise

Made from unbreakable steel. Torque handle included. Now also includes Standard Clubmakers Vise Jaws. Please Note: Additional shipping charges required due to weight.

How Golf Clubs Work by Ralph Maltby

This book may be small, but it's packed with information on how to get more out of your golf clubs to help improve your golf game.

Flexclean Epoxy Mixing Board

The GolfWorks FlexClean Re-Usable Epoxy Mixing Boards

Economy Ferrule Turning Arm

Makes turning ferrules fast and simple!

Value Line Golf Club Measuring Gauge

An economical alternative to the Professional Golf Club Gauge, this model incorporates many of its features - Please Note: Additional shipping charges required due to weight.

Powdered Lead - 1lb

Lead Powder can be used down the shaft or with a butt weight port to fine tune swingweight of any golf club

Golf Club Loft and Lie Protractor

Quickly measures loft and lie of woods or irons. Our Golf Club Protractor is perfect for reading loft and lie measurements.

Golf Club Design, Fitting, Alteration & Repair

4th Edition (1995) of this Golf Industry Standard! Understand everything about golf clubs! Know how each feature works, why some designs work or fail, and how to repair all makes and models of clubs!

The GolfWorks Golf Grip Tape Stripper

This handy tool saves you time and energy when stripping grip tape off a club.

Maltby Design Putter Head Loft Gauge

Do you know the loft of your Putter? It matters!!

Maltby Club Length Ruler

The Maltby Design Ruler is the most accurate club length ruler ever made, specifically designed for the club maker that demands perfection.

Multi Golf Shaft ID Gauge

A must have tool for reshafting and identifying almost any shaft.

Professional Metal Sided Shaft Clamp

This durable, heavy duty professional shaft clamp is easy to use.

Universal Grip Gauge

Measures all three important gripping dimensions — grip size, shaft butt size, and grip size under the right hand.

The GolfWorks Tour Set Plus Epoxy

25-35 minute gel time. Specially formulated with a longer gel time than regular Tour Set Epoxy.

Club Shield Paste Gel

Non Toxic Paste that safeguards vital parts of the golf club that can be destroyed by heat or open flames.

The GolfWorks 48" Aluminum Golf Club Ruler

This ruler not only measures shaft length, it tells you how to do the job!

The GolfWorks Hosel Cleaning System

The GolfWorks hosel cleaning system is ideal for all hosel cleaning necessities.

Maltby Bench Top Club Length Ruler

A quick and accurate tool to measure club lengths on irons, woods, wedges and putters.

Grip Bore Cleaner

Clean tape and residue from inside the grip before reinstalling.

Exact Measure Tool

Designed for custom clubmakers, use this tool to obtain consistently accurate measurements for tip and length trimming.

The GolfWorks Hosel Honing Tools

Great product for cleaning the inside of the hosel.

The Ultimate Grip Installer Tool

Makes installing grips on any shaft, regardless of the shaft butt diameter, a cinch!

Shaft Butt Weight Ports

A great tool for counterbalancing steel shafted woods, irons and putters.

The GolfWorks Head Tac Syringe

Head Tac instantly stops those annoying rattles in metal woods and can be used to safely add weight to metal woods.

The GolfWorks Quick Center Shafting Beads

Eliminate off-center shaft assembly and ensure a proper epoxy bond with our Quik Center assembly aid.

Metal Wood Replacement Bore Plugs

Serves as a replacement for manufacturer's plugs. Prevents epoxy from working its way into the clubhead, causing rattles.

Epoxy Applicator and Mixing Sticks

The GolfWorks Epoxy Applicator Sticks (100 count) specifically sized to fit inside golf club hosels.

Rhino rip Grip Cutter

Safe and efficient grip removal tool. The Rhino grip will quickly and safely remove any style grip.

Digital Caliper w/ LED Display

Digital Dial Calipers with large LED display is a must have tool for any shop.

Bending Bar for Double Bend Golf Shafts

Easily bend putters with double bend putter shafts

3M CPM Deburring and Finishing Wheel

Aluminum oxide wheel removes deep nicks and scratches from metal surfaces.

Flitz Metal Polish and Paint Restorer

Non-Abrasive Formula. Non-Toxic and Non-Flammable. Flitz Paste Metal Polish is a concentrated cream that is unequaled in its ability to Clean, Polish, Deoxidize and Protect.

6" Treated Sisal Wheel

Use of these wheels with the correct compounds and the Scotchbrite finishing belt allows a mirror finish to be easily applied to steel and titanium club heads.

Magnetic Lie Angle Demonstration Tool

Helps you see if the angle of the tool's shaft is too upright or too flat - or just right!

Double Bend Putter Assembly Jig

The GolfWorks Double Bend Assembly Jig takes all the guess” work out of those difficult double bend putter assembly jobs.

Stitched Buffing Wheel

Use of these wheels with the correct compounds and the Scotchbrite finishing belt allows a mirror finish to be easily applied to steel and titanium club heads.

3M Scotchbrite EXL Finishing Wheel

A must for all shops! Specially designed Scotchbrite wheel used for finish polishing after scratches have been removed

The GolfWorks Head Tac Adhesive

Stop annoying head rattles instantly!

Aluminum Hosel Protector

Universal in size, protects club heads from heat during shaft removal.

The GolfWorks Tour Set Epoxy

12 minute Gel Time. Tour Set epoxy combines the strength of long-cure epoxies with the conveniences of shorter cure epoxies.

The GolfWorks Tour Set Plus Epoxy

All the convenience and bonding strength of the standard Tour Set, but with a gel time of 25-35 minutes.

Protective Safety Glasses

These are popular, nylon framed glasses with side sheilds.

Metric Mixing Cups - 25 Count

Accurately mix insert and shafting epoxy with these inexpensive measuring cups. Marked in grams, ounces, milliliters and tablespoons.

The GolfWorks Epoxy Cartridge Gun

Epoxy Dispensing Cartridge Gun with 1:1 Plunger

Drill Bit Set with Holder

A set of the most commonly used drill bits complete with a sturdy holder conveniently marked with each bit size.

The GolfWorks 48mm x 18yd Grip Tape

The industry standard tape for installing slip-on rubber, synthetic or leather grips.

Water Activated Grip Tape

The best water-activated tape available. Tape is slippery when wet and extremely tacky when it dries. Best of all, it holds the grip firmly in place under temperature extremes, resisting twisting and slipping.

Blue Away - Metal Polish

Removes discoloration from over heating on chrome or stainless iron and wood hosels quickly and easilyPLEASE NOTE: Cannot Ship Via Air Service. No Ground Shipping to HI or AK.Removes discoloration from over heating on chrome or stainless iron and wood hos

Simichrome Polish

Removes the blueing from chrome or stainless hosels discolored during reshafting. PLEASE NOTE: Cannot Ship Via Air Service. No Ground Shipping to HI or AK.

Pip Strip Double Face Gripping Tape

A real timesaver! Precut single strip of 2" double-coated tape for use in gripping.

Golf Grip Build Up Tape

This single-coated, masking tape is used for building up grip sizes. Each wrap adds about .006" thickness.

Water Activated Grip Tape

The best water-activated tape available.

The GolfWorks Glass Shafting Beads

When assembling clubheads these real Glass Shafting Beads can ensure that the golf shaft will be properly centered in the hosel.

Lock-Tight Shaft Clamp

The best tool to safely clamp any size steel golf shaft

Acetone - 1qt.

Acetone will melt broken or cracked ferrules and color rings back together. PLEASE NOTE: Cannot Ship Via Air Service. No Ground Shipping to HI or AK.

The GolfWorks Quick Set Epoxy

Sets up in 5 - 10 minutes. Great for quick fix assembly work.

Bore Through Shaft Pins

These pins are specifically designed for finishing graphite and steel shafts used on bore-through wood heads.

Clubmakers Vise Graphite Shaft Extractor

An economical, yet durable shaft extractor with a constant 4-in clamp pressure.

The GolfWorks Shop Apron

Protect your clothes with this attractive, durable shop apron.

Super Lock Tight Shaft Holder

A heavy-duty version of the Original Lock Tight. The clamping surface is lengthened for added gripping power.

Plastic Sqeeze Solvent Bottle - 8 oz

Use for solvents, oils, thinners and most other liquids. 8 oz. capacity.

Maltby Design - #5 Iron Loft and CG Gauge

Uniquely simple, but incredibly effective and easy to use, this new 5-iron Loft Gauge is a must for all clubmakers.

Golf Club Iron Ferrules - Colored Trim Ring

52PI Single - Black/Chrome Std .370" Iron Ferrule

Reaming and Boring Vise

Hold heads for reaming or boring with the non-marring aluminum clamping jaws.

The GolfWorks Tour Set Epoxy

Tour Set Epoxy combines the strength of long-cure epoxies with the conveniences of shorter cure epoxies.

Sanding Belt

1" x 30" and 1" x 42" Sanding Belts.Available in 3 grits — coarse, medium and fine.

Rhino Rip Bench Mount Tool

Mounts to any work bench and securely holds the grip in place during the grip removal process.

Clubmakers Vise - Bench Mount Extension

Optional base allows vise to be extended 12" from workbench!

Driver Loft and CG Gauge

Machined with four of the most common loft angles for drivers, this gauge is an easy, quick check loft gauge that is much easier to use than traditional protractors.

Fairway Loft and CG Gauge

Use in conjunction with Center of Gravity Tool (CGM) to accurately measure the vertical and rearward CG location of 3-woods.

Viewing 1 - 111 of 111