Steel Shaft Butt Extensions

Steel Shaft Butt Extensions


.560 Butt Size Shaft Extension
$2.59
In Stock
.580 Butt Size Shaft Extension
$2.59
In Stock
.600 Butt Size Shaft Extension
$2.59
In Stock
.620 Butt Size Shaft Extension
$2.59
In Stock
Shaft Extension Adhesive - 30 ml. Syringe
$6.99
In Stock

Steel Shaft Butt Extensions

The GolfWorks Steel Shaft Extensions can be used to extend the finished playing length of any steel shafted club. These 12" long steel butt extensions feature an 8 1/2" parallel mid sections that can be cut in the middle to create two 4 1/4" extensions. Each section has a tapered end to perfectly fit inside the shaft being extended. Each extension has a 1 5/8" shaft insertions depth and is chrome plated to prevent rusting.

Steel Shaft Butt Extensions is rated 4.7 out of 5 by 10.
Rated 5 out of 5 by from Sweet Add-On 4 Big Man.. Being a 6'3" guy with "monkey" arms. These cut to 1" extension brought my new/used irons to my old irons standard. No more slicing...sweet. Note one extension does 2 irons.
Date published: 2009-08-26
Rated 5 out of 5 by from Good fit and great price. Used the .600 extenders to bring my club shafts up to standard length. Fit and finish was good. I sanded the small end, coated with epoxy, and cut them to correct length. I did trim the male ends first to minimize swingweight impact. they were longer than needed. I've had no problems at all and the clubs are performing just fine playing 3 times a week. I waited until it was time to replace the grips to add the extensions so with the added length and new grips it's been like playing with a new set of clubs. Very satisfied and as always great service from Golfworks.
Date published: 2017-04-25
Rated 4 out of 5 by from Got the job done The fit was nice and snug for the most part, had one that was bent and had to repair, and another that when I test fit it, failed to line up well with the shaft. the other 8 ends were fine. for 3 bucks add an extra extension to make sure your covered. Overall still better than universal extensions I have used in the past and had one break
Date published: 2015-12-27
Rated 5 out of 5 by from Just what I needed Got an incredible deal on some Mizuno irons that were brand new, but came an inch short, so the original owner traded them in. Bought the irons, removed the stock grips, which are lousy anyway, glued in the extenders and put some good grips on. New custom fit set of Mizunos for less than $160. Can't beat that
Date published: 2016-01-05
Rated 5 out of 5 by from Proper Butt Extension Size I'm looking to extend two sets of vintage irons with steel butt extensions and need to know the proper size. 1. MacGregor DX2 irons 2. MacGregor Tourney REC; M85 with the small head Your recommendations are appreciated.
Date published: 2017-06-21
Rated 5 out of 5 by from Sweet Add-On 4 Big Man.. Being a 6'3" guy with "monkey" arms. These cut to 1" extension brought my new/used irons to my old irons standard. No more slicing...sweet. Note one extension does 2 irons.
Date published: 2009-08-26
Rated 4 out of 5 by from Grips The grips were just what I expected. The delivery was on time with no problems.
Date published: 2017-01-27
Rated 4 out of 5 by from Ease of Use The extensions are great for lengthening clubs and are easy to work with.
Date published: 2017-09-09
  • y_2017, m_10, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_S60, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Can you confirm if the .580 is the correct size for a Scotty Cameron Studio Select Fastback 1? Thanks.

Asked by: daverthal
I do not know for sure but would expect it to be a .580" butt diameter shaft. I have a few Cameron putter's of my own and they are all .580" butt diameter.
Answered by: JimY
Date published: 2017-10-10

I have a set of Cobra F7 one length irons stiff flex steel that I want to extend. Would the.600 be the right size for me. thanks

Asked by: Tim
If these have the True Temper King F7 steel shafts they are likely a .600" butt diameter and use the S60 (.600") steel extension.
Answered by: JimY
Date published: 2017-10-09

size of shaft extension for callaway 14x steel head irons. i think its 6.

Asked by: art
The stock steel shafts used in the Callaway X14 irons was a .600" butt diameter and would use the S60 (.600") steel extension.
Answered by: JimY
Date published: 2017-10-09

I need to order some golf staff extensions. The shaft I have is a reax by fst steel stiff 88 high launch. What diameter extension do I need to order?

Asked by: CDC
The REAX 88 Steel shafts are a .600" butt diameter shaft and would use the S60 (.600") steel shaft extensions.
Answered by: JimY
Date published: 2017-10-02

I have True Temper XP 90, S300 shafts.   What is the butt diameter shaft extender I will need for that shaft? 

Asked by: Cadmus Maximus
The XP 90 shaft is made exclusively for Titleist. The information I have shows it to be a .605" butt diameter like the XP 95. You should be able to use the S60 (.600") extension. I would also use some Quik Center (QCSB) mixed with the epoxy to center and snug the fit of the extension.
Answered by: JimY
Date published: 2017-09-28

True tempered dynalite 85 s flex cobra bio cell. Any help with butt size. Thanks 

Asked by: Bigknocker81
The Cobra Dynalite 85 is a .600" butt diameter.
Answered by: JimY
Date published: 2017-09-19

How do you determine the Butt Size for the Shaft Extension.

Asked by: Shooter
That depends on which shafts your clubs have. With steel shafts you match the extension size to the butt diameter measurement of the shafts you have. If your shafts are a .600" butt diameter you would use the S60 steel extensions. If you tell me which model shafts you have an what flex they are there is a good chance I can tell you which extensions you need. You can email the information to me at jyachinich@golfworks.com
Answered by: JimY
Date published: 2017-09-18

What size would I need for callaway x20s?

Asked by: Ayden
If you have the Uniflex steel shaft that was used in the Callaway X20 irons it would use the S60 (.600") steel shaft extension.
Answered by: JimY
Date published: 2017-09-18
  • y_2017, m_10, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_203
  • loc_en_US, sid_S60, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks