Steel Shaft Butt Extensions

Steel Shaft Butt Extensions


.560 Butt Size Shaft Extension
$2.59
In Stock
.580 Butt Size Shaft Extension
$2.59
In Stock
.600 Butt Size Shaft Extension
$2.59
In Stock
.620 Butt Size Shaft Extension
$2.59
In Stock
Shaft Extension Adhesive - 30 ml. Syringe
$6.99
In Stock

Steel Shaft Butt Extensions

The GolfWorks Steel Shaft Extensions can be used to extend the finished playing length of any steel shafted club. These 12" long steel butt extensions feature an 8 1/2" parallel mid sections that can be cut in the middle to create two 4 1/4" extensions. Each section has a tapered end to perfectly fit inside the shaft being extended. Each extension has a 1 5/8" shaft insertions depth and is chrome plated to prevent rusting.

Steel Shaft Butt Extensions is rated 4.7 out of 5 by 6.
Rated 5 out of 5 by from Sweet Add-On 4 Big Man.. Being a 6'3" guy with "monkey" arms. These cut to 1" extension brought my new/used irons to my old irons standard. No more slicing...sweet. Note one extension does 2 irons.
Date published: 2009-08-26
Rated 4 out of 5 by from Got the job done The fit was nice and snug for the most part, had one that was bent and had to repair, and another that when I test fit it, failed to line up well with the shaft. the other 8 ends were fine. for 3 bucks add an extra extension to make sure your covered. Overall still better than universal extensions I have used in the past and had one break
Date published: 2015-12-27
Rated 5 out of 5 by from Just what I needed Got an incredible deal on some Mizuno irons that were brand new, but came an inch short, so the original owner traded them in. Bought the irons, removed the stock grips, which are lousy anyway, glued in the extenders and put some good grips on. New custom fit set of Mizunos for less than $160. Can't beat that
Date published: 2016-01-05
Rated 4 out of 5 by from Grips The grips were just what I expected. The delivery was on time with no problems.
Date published: 2017-01-27
Rated 5 out of 5 by from Extensions Bought this a month ago and the extensions fit per
Date published: 2017-03-17
Rated 5 out of 5 by from Good Deal Nice product! Fit was perfect. Shipping was super fast!
Date published: 2015-12-08
  • y_2017, m_3, d_26, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_S60, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What size would I need to extend a Scotty Cameron California Monterey 1.5 33"?

Asked by: Tyjk35
Cameron putters generally have a.580" butt diameter shaft. I would expect the S58 (.580") extension to fit.
Answered by: JimY
Date published: 2017-03-13

I am currently looking to extend my clubs, they all have a butt end size of .625, what would be the best fit for them?

Asked by: JayJay
If this is a graphite shaft we would need to know the inside diameter measurement at the butt end of the shaft to match the correct size extension. We would at least need to know how much the shaft weights. If this is a .625" butt diameter steel shaft we do not have an extension to fit it.
Answered by: JimY
Date published: 2017-03-13

What is butt diameter of the true temper dynamic gold X100 steel shafts? I need to extend a couple wedges, I think they're a .600, but I don't know for sure.

Asked by: Clinton
DG X100's are a .600" butt diameter and would use the S60 (.600") extension.
Answered by: JimY
Date published: 2017-03-13

Hello, Need to extend 3 wedges by 1/2" that currently have steel KBS Tour 130 X shafts. What size extenders do I need? Thanks!

Asked by: Eric
These shafts are a .600" butt diameter and would use the S60 (.600") steel extension.
Answered by: JimY
Date published: 2017-03-08

I have taylormade m2 tour 2016 not sure what butt end size I need can you tell me please !? Many thanks 

Asked by: Nif
The 2016 M2 Tour irons were listed as having the True Temper XP 95 shaft which have a .605" butt diameter. You can use the S60 (.600") steel extension and I also would use some Quik Center (QCSB) mixed with the epoxy to tighten the fit. https://www.golfworks.com/the-golfworks-quick-center-shafting-beads/p/QCSB/
Answered by: JimY
Date published: 2017-03-08

How are the shaft but extensions measured?

Asked by: Bob H
If you have steel shafts the extensions are sized off the outside diameter measurement of the shaft. If you have a .600" butt diameter you would use the S60 extension. If you are not sure which extensions you need and can tell us which shafts you have, manufacture, brand and flex, we likely can tell you which size extension you need.
Answered by: JimY
Date published: 2017-03-07

How do I know what size steel shaft extensions to order? .560, .580 etc

Asked by: Mwar611
It depends on which steel shafts you have, manufacture and model. If you have a .600" butt diameter shaft you would use the S60 (.600") extension. If you do not know the butt diameter of the shafts you have just let me know and I can most likely tell you which size extensions you need. You can email me at jyachinich@golfworks.com
Answered by: JimY
Date published: 2017-03-07

What is the the butt size for Callaway RazrX steel irons

Asked by: Ronald
It can depend on which shafts are in your Razr X irons. All steel shafts do not have the same butt diameter. If your set has the M-10 Razr X Flighted steel shafts they should be a .600" butt diameter and would use the S60 (.600") butt diameter steel shaft.
Answered by: JimY
Date published: 2017-03-03
  • y_2017, m_3, d_27, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_150
  • loc_en_US, sid_S60, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks