Swingweight Shaft Corks

Swingweight Shaft Corks

Irons - 25pk
In Stock
Woods - 25pk
In Stock

Swingweight Shaft Corks

A must-have when adding lead ot tungsten powder down a steel shaft to increase swingweight. Apply a small film of epoxy to the cork and force down the shaft with a ram rod to secure powdered weight. 25 per pack.
Not Found.

What is the best way to put these corks in?

Asked by: craiger
Most of the time the corks will be installed after lead powder has been used to increase the swingweight. Once the cork is dropped into the shaft, a ram rod can be used to push it down to the tip end of the shaft.
Answered by: GW2002
Date published: 2016-07-21

Will these corks work with tapered iron shafts? (.355)? If so, do I get the iron or woods?

Asked by: Tincup
I ordered both size corks to use with taper tip steel shafts and the smaller ones are better.  I think the smaller ones are the wood corks but either way smaller is better for the tips of .355 steel shafts.
Answered by: guido
Date published: 2017-10-11

what corks do I used for graphite iron shafts(recoil 660). The tip end of shaft I.D. is very small & I want corks to seat at very end.

Asked by: Dime60
We do not stock a cork that fits the inside diameter of a graphite shaft. We do not recommend putting lead or tungsten powder down inside a graphite shaft as a method for adding swingweight. It can create a shear point inside the graphite shaft that could cause breakage.
Answered by: JimY
Date published: 2015-08-21

Are the iron corks the correct size for most putter shafts? which cork for putters?

Asked by: william86
Yes, the iron corks should work with most steel putter shafts.
Answered by: GW2002
Date published: 2017-07-04

What is the diameter (top and bottom) size of the cork for Irons and Woods?

Asked by: Edgeman
The iron corks measure .455" and the wood corks measure .375". These measurements are at the top.
Answered by: JimY
Date published: 2015-03-02
  • y_2017, m_11, d_17, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_CI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks