TaylorMade JetSpeed & RBZ Stage 2 Shaft Adaptor Sleeves

TaylorMade JetSpeed & RBZ Stage 2 Shaft Adaptor Sleeves

TaylorMade Rescue Adaptor - RH, .370"

TaylorMade JetSpeed & RBZ Stage 2 Shaft Adaptor Sleeves

TaylorMade factory replacement adaptor sleeves for the JetSpeed and RBZ Stage 2 driver heads. These adaptor sleeves allow you to add multiple shaft options for your driver. This factory authentic adaptor direct from TaylorMade also allows for 7 standard and 5 upright loft settings for a total of 12 different loft/lie settings. Shaft adaptors are available in .335" (TP), 350" and .370" Rescue in both RH and LH options.

Not Found.

Does this mean we will receive 2 adapters or just one?

Asked by: Ben
If you order a quantity of 1 adaptor, you only receive 1 adaptor, not 2.
Answered by: GW2002
Date published: 2017-05-02

Will these adaptors work on a R15 (RH) rescue club (.370)?

Asked by: Duncan
From the information I have from Taylor Made the TM0020 shaft adapter should fit the R15 Rescue.
Answered by: JimY
Date published: 2016-12-19

Which shaft adaptor would be used for the M2 hl 3 wood?Also once installed how much length will this add to the shaft/club?

Asked by: Mike
The M2 HL 3 wood does not use one of the shaft adapters. It would just use a regular ferrule like the BB0006. http://www.golfworks.com/collared-golf-club-ferrules/p/BB0001/
Answered by: JimY
Date published: 2016-11-28

Is this the correct adaptor for my taylormade fct 3 hybrid

Asked by: SammyW
No this adapter will not fit the FCT 3 hybrid. We do not have a shaft adapter for the FCT 3 hybrid.
Answered by: JimY
Date published: 2016-11-21

do you have .335? tip adapter for a TM Jet Speed Driver, RH

Asked by: Silky
Yes we do have a .335 tip adaptor for Taylormade Jet Speed Drivers. http://www.golfworks.com/taylormade-m1-m2-r-15-sldr-shaft-adaptor/p/TM0023/ http://www.golfworks.com/the-golfworks-universal-taylormade-shaft-adaptor/p/BB9065/
Answered by: Brent Dill
Date published: 2016-08-26

I have a .350 diameter shaft that I want to put in a Jetspeed driver. What adaptor is needed ?

Asked by: David
We do not stock a shaft adaptor for the Jetspeed driver that will accept a .350" tip diameter shaft. There is a chance that we can special order an aftermarket shaft adaptor for the .350" tip size shaft. You would need to contact our Customer Service department at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2016-08-23

I have an Aldila 65S shaft that I want to put in the RBZ 2 head. Not sure what size shaft tip I have. Can you provide any assistance?

Asked by: Larry
The TM0020 shaft adaptor is for a Rescue (Hybrid) which would use a .370" tip diameter shaft. If you have an Aldila 65S hybrid shaft it is likely a .370" tip diameter shaft. If you have a RBZ Stage 2 driver you will need the BB9065 shaft adaptor which is for a .335" tip diameter shaft. With wood shafts Aldila will generally put 350 on the shaft where they silk screen the name of the shaft onto the shaft. If it does not show 350 then it is likely a .335" tip diameter. We stock the BB9065 in a .335" tip size only. http://www.golfworks.com/the-golfworks-universal-taylormade-shaft-adaptor/p/BB9065/
Answered by: JimY
Date published: 2016-08-01

I need the correct adapter for a Taylor slider driver to fit a Pro Force V2 # US0013H .335

Asked by: Bill
For the Taylor Made SLDR driver you need the TM0023 shaft adaptor. http://www.golfworks.com/taylormade-m1-m2-r-15-sldr-shaft-adaptor/p/TM0023/
Answered by: JimY
Date published: 2016-07-20
  • y_2017, m_5, d_25, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_32
  • loc_en_US, sid_TM0020, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks