TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve

TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve


TaylorMade R11 & R11 S Adaptor - RH .335" - 3 Degree Offset
$14.99
In Stock

TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve

Factory adjustable adaptor replacement sleeves for the TaylorMade™ R11 S driver. Also fits the R11 metal woods increasing loft/lie adjustability by 1 degree. Other than replacing a defective Adaptor, the Adaptor Sleeves can also be used to create multiple shaft options for the TaylorMade R11 S driver for less than the cost of simply reshafting your current shaft sleeve.

  • Available in RH .335" and LH - .335" and .350"
  • 3 degree offset
  • Ferrule is pre-assembled for easy assembly

TaylorMade R11 S, R11 and R9 Shaft Adaptor Sleeve is rated 5.0 out of 5 by 9.
Rated 5 out of 5 by from Perfect for an alternate driver shaft Perfect for providing an alternative shaft for my driver and experimenting with a stiffer flex.
Date published: 2015-12-12
Rated 5 out of 5 by from Same fit as OEM / no issues Very good value for price, quality of products and availability. Shipping reasonably priced and good notification and tracking of shipment
Date published: 2016-09-14
Rated 5 out of 5 by from Customer request Customer wanted a more flexible shaft for his R11s driver so rather than distroying the adapter, we just added a shaft.
Date published: 2016-06-02
Rated 5 out of 5 by from The part I need Thank you for quick shipping your company is very fast, I will order more equipment
Date published: 2015-08-30
Rated 5 out of 5 by from Perfect Fast shipping great product. Will consider Golf Works in the future!
Date published: 2015-12-28
Rated 5 out of 5 by from Great Great product great service I will be a returning customer
Date published: 2016-05-17
Rated 5 out of 5 by from As advertised Adapter was in new condition and arrived very quickly
Date published: 2016-05-02
Rated 5 out of 5 by from great product Always an excellent quality and outstanding service
Date published: 2015-06-04
  • y_2017, m_5, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_TM0016, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will this adapter work as well for the rescue 11 tp version, I've seen conflicting numbers for the rescue online. Thank you. 

Asked by: Dms6118
We do not have a shaft adaptor that will fit the Rescue R11 TP. The information I have says that Taylor Made used a .355" taper tip shaft in this Rescue.
Answered by: JimY
Date published: 2017-03-30

proper installation

Asked by: wilmo
The shaft tip would be prepped per the instructions for tip trimming etc. The shaft tip would be sanded to remove the poly and paint cotes. The shaft would then be installed into the adaptor. If you want the standard setting you would align the shaft graphically per the Standard Loft setting. Once the epoxy has cured you can insert the adaptor into the clubhead and measure and cut the shaft from the grip end to your finished length. Here is a link for a You Tube video from a Taylor Made Tour van installing a shaft adaptor. https://www.youtube.com/watch?v=-ft1syIejcM
Answered by: JimY
Date published: 2017-03-20

Is it possible to pull the head off the shaft and not the loft adjuster on an R11s head?

Asked by: Memo
The R11S has a shaft adaptor that is secured to the clubhead with screw that comes up through the sole of the clubhead. You use this Taylor Made wrench to loosen the screw and remove the clubhead from the shaft and shaft adaptor. The shaft adaptor is epoxied to the clubhead and will stay on the shaft. http://www.golfworks.com/taylormade-universal-torque-wrench/p/TM0018/
Answered by: JimY
Date published: 2017-02-02

Hello,  I need an R11 .350 adapter sleeve ~ do you carry such?

Asked by: Aswing 2000
No we do not stock a shaft adaptor in a .350" tip size for the R11. We should be able to special order an aftermarket shaft adaptor in .350" for the R11. You would need to contact our Customer Service Department at 1-800-848-8358 or by email at golfworks@golfworks.com.
Answered by: JimY
Date published: 2017-01-25

I just bought a Taylormade M1 driver with a s-flex shaft. I had a R11 with a r-flex shaft. Can I pull the R11 shaft on the M1 driver. Thanks,

Asked by: Tator
The shaft in the R11 is a .350" tip diamter. To install that shaft into the M1 you will need a shaft adaptor for the M1 that accepts the .350" shaft. We do not stock an adaptor for the M1 that will accept a .350" tip size shaft. We can special order an aftermarket adaptor for the M1 that will accept the .350" tip size shaft. You will need to contact our Customer Service Department at 1-800-848-8358 or by email at golfworks@golfworks.com and they can help you with the special order.
Answered by: JimY
Date published: 2017-01-19

have an R11 9.0 driver would like an adaptor to change shafts..which one do I need?

Asked by: js willis
The TM0016 works for the R11 driver.
Answered by: JimY
Date published: 2016-12-20

I have a left handed R11s shaft adapter sleeve.  Can I use it for a right handed club and if so, how would I set it up?

Asked by: Oldpro71
Yes the left hand adapter will fit the right hand club but the readings will read opposite or backwards. Here are some links on how the R11 adjustments work. http://site.taylormadegolf.com/R11S_Tuner/r11sTuner.htm https://www.youtube.com/watch?v=DIDcupk_xkE
Answered by: JimY
Date published: 2016-12-05

Can I use the left handed shaft adapter in a right handed club, and if I can how would I adjust it to the right handed club.

Asked by: Oldpro71
Yes the left hand adapter will fit the right hand club but the readings will read opposite or backwards. Here are some links on how the R11 adjustments work. http://site.taylormadegolf.com/R11S_Tuner/r11sTuner.htm https://www.youtube.com/watch?v=DIDcupk_xkE
Answered by: JimY
Date published: 2016-12-05
  • y_2017, m_5, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_53
  • loc_en_US, sid_TM0016, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks