TaylorMade RAC Iron Ferrules

TaylorMade RAC Iron Ferrules


Taylor Made RAC Iron Ferrules - 12 pk.
$4.99
In Stock
Taylor Made RAC Iron Ferrules - single
$0.45
In Stock

TaylorMade RAC Iron Ferrules

Undercut ferrule designed specifically to fit the Taylor Made RAC, HT, OS, LT and CGB irons. (12 per pack)

Not Found.

I have a set of used Taylormade RAC LT irons. I have read that they are .370 hosel, but I will be reshaffting them with the TT DG Pros with .355 taper. Are your RAC ferrules best to use? What other alternatives are there would I have? Thanks.

Asked by: Mike
The RAC irons have a step on the top of the hosel where the ferrule snaps on to the clubhead and the RAC ferrules are the only ferrules that will fit them. You can use a .370" ferrule with .355" taper tip iron shafts because they taper out to approximately .370" where the shafts exit the top of the hosel so the ferrules will work. You will need to shim the .355" taper tip DG Pro's to properly fit the .370" hosel bores of the RAC LT irons. Our SHIMT (.355" - .370") works well for this assembly. https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2017-07-31

Are there any alternatives to these? I've broken 4 of them... All of them have cracked even when lightly heated to snap around the hozzle.

Asked by: Matt
No there is no other ferrule for the RAC irons. Before these ferrules were available we would use a standard ferrule and drill up into the ferrule to create an area that would fit over the top part of the RAC irons. You might give that a try.
Answered by: JimY
Date published: 2017-07-11

I need ferrules for 2016 taylormade m2 irons. Do you have them? Thanks

Asked by: Jack
The BB9071 Taylor Made Universal ferrule will work and match the stock ferrule used by Taylor Made on the M2 irons. https://www.golfworks.com/taylormade-universal-370-iron-ferrule/p/BB9071/
Answered by: JimY
Date published: 2017-05-08

Will these ferrules work for my Taylormadr R7 XD irons?

Asked by: Jeff
These ferrule were really only for the RAC model irons and they actually snap on to the top of the hosel. They would not be needed on the R7 XD irons. Taylor Made used a ferrule like our 52PI on these irons. http://www.golfworks.com/golf-club-iron-ferrules-colored-trim-ring/p/52PIS/
Answered by: JimY
Date published: 2016-12-05

Can i use a standard shaft with these ferrules to re-shaft a RAC-CGB 4 and 6 iron?

Asked by: Gwilly38
The RAC CGB irons used a .370" tip diameter shaft and yes the RAC ferrules will work with any .370" shaft.
Answered by: JimY
Date published: 2016-06-09

I am trying to find 10 ferrules for my Taylor Made  RAC CGD .370 irons. Can you help? Much appreciated. Jason

Asked by: Jasden
For Taylor Made RAC CGB irons you need to use the Taylor Made RAC ferrules (BB9007). This is the only ferrule that will fit these irons. http://www.golfworks.com/taylormade-rac-iron-ferrules/p/BB9007/
Answered by: JimY
Date published: 2016-05-12

is the hosel on taylormade irons 370 tapered?

Asked by: james
Some Taylor Made irons use a .370" tip diameter and other Taylor Made irons use a .355" taper tip diameter shaft. The Taylor Made TP model irons all use a .355" taper tip and all other models use a .370" parallel tip diameter shaft. If you have a set of Taylor Made RAC irons then you would need the BB9007 ferrules other wise you could use a ferrule like the 74PI. If you can tell us which Taylor Made irons you have we can help you with the correct ferrules. http://www.golfworks.com/golf-club-iron-ferrules-black/p/60PI/
Answered by: JimY
Date published: 2017-01-27

I have the rac os irons and  I ordered project x stiff shafts that are .355 . Will these fit and if so what size ferrule do I need ? 

Asked by: fife4ua
The BB9007 ferrule will fit because the .355" taper tip shaft tapers out to approximately .370" where the shaft exits the top of the hosel. You will need to shim the .335" tip diameter shaft to fit the .370" hosel bore. The SHIMT works for this. http://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2016-04-19
  • y_2017, m_10, d_21, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_BB9007, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks