TaylorMade RBZ Shaft Adaptor Sleeve

TaylorMade RBZ Shaft Adaptor Sleeve


TM RBZ Adaptor Sleeve -RH .335" - 3 Degree Offset
$2.99
In Stock
TM RBZ Adaptor Sleeve -LH .335" - 3 Degree Offset
$2.99
In Stock

TaylorMade RBZ Shaft Adaptor Sleeve

Factory adjustable adaptor replacement sleeves for the TaylorMade™ RBZ drivers. Other than replacing a defective Adaptor, the Adaptor Sleeves can also be used to create multiple shaft options for the TaylorMade RBZ driver for less than the cost of simply reshafting your current shaft sleeve.

  • Available in RH/LH - .335" and .350"
  • 3 degree offset
  • Ferrule is pre-assembled for easy assembly

TaylorMade RBZ Shaft Adaptor Sleeve is rated 3.5 out of 5 by 4.
Rated 1 out of 5 by from adaptor It didn't work so I trash canned it. Then I bought another adaptor from you and tried to install it on the shaft I bought from you [335] and it doesn't fit. So give another shaft that fits and I might change my mind about now having nothing. Disappointed.
Date published: 2015-10-08
Rated 3 out of 5 by from Just like the OEM part Looks identical to the original. Performs identically. Overpriced. No way should this cost $15. Gave an average (3 star) rating because of the price.
Date published: 2016-09-22
Rated 5 out of 5 by from Sleeve Adapter Was Perfect Needed to replace a broken shaft and this lh adapter sleeve fit the RBZ Tour head perfectly. Nice to have this great driver back in play.
Date published: 2016-03-22
Rated 5 out of 5 by from Quick Service Delivery was very quick and service was great. I will use golf works
Date published: 2016-01-28
  • y_2017, m_9, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TM0017, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

How to adapt to driver

Asked by: Bigblue
This shaft adaptor fits the Taylor Made RBZ driver. It is epoxied on the tip end of the golf shaft and then inserts into the RBZ driver head and secured with a screw that comes up through the sole of the clubhead. At this link you can see in the picture where the screw goes in through the sole. https://www.globalgolf.com/golf-clubs/1022875-taylormade-rocketballz-driver/used/
Answered by: JimY
Date published: 2017-08-16

Can you please tell me which adaptor I need to fit a RBZ shaft to a M2 head thank you 

Asked by: Stuart
The stock RBZ shaft is a .350" tip size and we do not have a shaft adaptor for the M2 driver that will fit a .350" tip size shaft.
Answered by: JimY
Date published: 2017-08-14

I'm just looking for the plastic hozzel to fit this adapter??

Asked by: Kyle
You need the BB9030 Taylor Made Adaptor Ferrule. https://www.golfworks.com/taylormade-r11-ferrule/p/BB9030/
Answered by: JimY
Date published: 2017-08-08

is the .335 tip what I need on my RBZ tour 9 driver

Asked by: cricket69
Yes if you are installing a .335" tip size shaft the TM0017 is the shaft adaptor you need. The RBZ Tour driver used a .350" tip size stock shaft. We do not have a TM shaft adaptor for the RBZ Tour that fits a .350" tip size shaft.
Answered by: JimY
Date published: 2017-07-11

Does this work with an R11 fairway metal head?

Asked by: Todd
Yes according to the information I have from Taylor Made this RBZ adaptor should work in the R11 fairway woods.
Answered by: JimY
Date published: 2017-06-08

Are these oem adaptors?

Asked by: jimi
Yes these are original Taylor Made adaptors.
Answered by: JimY
Date published: 2017-05-31

I have a Taylormade Rescue Hybrid, calls for a shaft adapter TR00704- do you stock this? Where can I get it? What shaft size do I need to go along with it?

Asked by: Phillie23
JimY- I have the FCT rescue hybrid.
Answered by: Phillie23
Date published: 2017-05-23

will this make lie angle adjustable? if so how much = or -. And what diameters am I looking at?; the small, medium and large land. Thank you, Noah

Asked by: Noah
This will change the lie angle by 3 degrees either flat or upright. This adaptor uses a .335" tip diameter shaft. The Original RBZ Taylor Made driver used a .350" tip size shaft.
Answered by: JimY
Date published: 2017-05-22
  • y_2017, m_9, d_24, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_32
  • loc_en_US, sid_TM0017, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks