TayorMade Burner Superfast Replacement Grip

TayorMade Burner Superfast Replacement Grip


.600" (Rnd) 25g Standard - Grey/Black -
$9.19
In Stock
.620" (Rnd) 25g Standard - Grey/Black -
$9.19
In Stock
OR

Buy The Complete Set

Product Name
Price
Qty
TayorMade Burner Superfast .600 Grip Kit
$127.47
TayorMade Burner Superfast .620 Grip Kit
$127.47

TayorMade Burner Superfast Replacement Grip

TaylorMade Burner Superfast Stock Replacement Grip

  • Designed for all TaylorMade Burner Superfasat drivers and fairways
  • Firm, tacky feel with unparalled slip and torque resistance
  • Ultra lite weight (25 grams) for increased club head speed.
  • Grey and black in color


  • The Complete Set listed above includes 13 grips, grip tape, grip solvent, rubber vise clamp, grip gauge and easy to follow instructions!
  • Taylormade Burner Superfast Grip Specifications

    TayorMade Burner Superfast Replacement Grip is rated 4.8 out of 5 by 5.
    Rated 4 out of 5 by from Superfasrt Grip I have been using standard grips on my '09 Burner since the original grip was replaced years ago. Decided to see if the 25 gram grip made any difference to length, dispersion, etc. After several rounds I have noticed no difference in either. It did take a few swings to get used to the difference in swing weight caused by going from 50 gram grip to 25 gm Superfast replacement. Biggest difference as loss of tackiness from new decade cord to Winn lightweight grip. Feels nice but definitely not tacky.
    Date published: 2016-07-27
    Rated 5 out of 5 by from great light weight grip Replacing the oem grip on a tm superlight driver. Exact same weight and feel
    Date published: 2015-07-07
    Rated 5 out of 5 by from Perfect Fit I bought this grip for my TaylorMade Burner Superfast driver, and it fits great. No problems regripping, and it feels secure and comfortable. Great product at a reasonable price with prompt delivery. Thank you.
    Date published: 2016-06-05
    Rated 5 out of 5 by from Lite weight I bought this grip to install on my taylormade mini driver,it works very well on my mini driver
    Date published: 2016-06-09
    Rated 5 out of 5 by from Better grip. This is a great grip, much better than I expected to get.
    Date published: 2016-03-25
    • y_2017, m_3, d_28, h_22
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_5
    • loc_en_US, sid_WN0080, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_golfworks

    will these grips fit a bubble shaft

    Asked by: Andy
    No the Superfast replacement grips will not fit the Bubble shaft. You need the Taylor Made Crossline Bubble grips for the Bubble shafts (Lk0143). https://www.golfworks.com/taylormade-crossline-bubble-grip/p/LK0143/ These are the only grips that will fit the Bubble shaft. You will also likely need the BBGIT grip installation tool to get these grips installed over the much larger butt diameter of the Bubble shafts. https://www.golfworks.com/the-ultimate-grip-installer-tool/p/BBGIT/
    Answered by: JimY
    Date published: 2017-03-13

    What is the difference between the two size grips ? Are these for women ?

    Asked by: Jill
    The .600" core size grip will create a standard size grip when installed on a .600" butt diameter shaft and the .620" core size grip creates a standard size grip when installed on a .620" butt diameter shaft. With the Burner Superfast 2.0 driver Taylor Made used a .620" butt diameter shaft for the R,S,X flexes and a .600" butt diameter for L flex. The WN0080 is a men's grip. The WN0081 is the Lady Burner Superfast grip. https://www.golfworks.com/taylormade-lady-superfast-golf-grip/p/WN0081/
    Answered by: JimY
    Date published: 2017-02-23

    Which kit do I need? I have taylor made 2009 burner 85 irons, steel shaft. How do I figure out shaft diameter, plus have driver and Fairwood that need grips, do I measure the shaft or is there a code on there .

    Asked by: ebbtide01
    You can view the chart on our website for detailed OEM shaft specifications. https://www.golfworks.com/images/art/TaylorMade.pdf Your irons have a butt diameter of .600" so any shaft with a .600" core will produce a standard size grip. A grip with a .580" core will also work but will produce a slightly (+1/64") oversized grip when installed.
    Answered by: Admin
    Date published: 2017-02-17

    The super fast replacement grip. What's the difference between the 600 and 620?

    Asked by: Jothechipper
    In the Burner Superfast drivers and fairway woods Taylor Made used some shafts flexes that had a .620" butt diameter and others that were a .600" butt diameter. You would use the .620" core size grip on the .620" butt diameter shaft and the .600" core size on the .600" butt diameter shaft to create a men's standard size. The M flex driver shaft (Senior flex) and the fairway woods in M,R,S,X flexes had a .620" butt diameter.
    Answered by: JimY
    Date published: 2017-01-31

    Will these grips work on my TaylorMade Tour Bladez irons?

    Asked by: Edward
    Depending on which shafts you have in your Taylor Made Tour Bladz irons but the .600" size should fit most of the stock shafts.
    Answered by: JimY
    Date published: 2017-01-30

    What grips do I need for the burner bubble graphite shaft 

    Asked by: Jimnsusie
    You will need the Taylor Made Crossline Bubble (LK0143) grips for these clubs. They are the only grips that will fit correctly. You will likely also need a Big Butt Grip Installation Tool (BBGIT) to get the grips started over the larger shaft butt diameter. http://www.golfworks.com/the-ultimate-grip-installer-tool/p/BBGIT/
    Answered by: JimY
    Date published: 2017-01-24

    i have a superfast driver on a reax 4.8 flex R shaft which grip is a replacement for the original.

    Asked by: Emac
    The R flex was a .620" butt diameter so you want the .620" core size.
    Answered by: JimY
    Date published: 2016-11-21

    Can you supply an oversize (soft feel) grip of the bubble shaft driver?

    Asked by: Pete
    No. No one ever made an oversize grip for the Taylor Made Bubble shaft. The Taylor Made Crossline Bubble is the only grip that will fit the bubble shaft correctly. http://www.golfworks.ca/taylormade-crossline-bubble-grip/p/LK0143/
    Answered by: JimY
    Date published: 2016-10-19
    • y_2017, m_3, d_29, h_24CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_35
    • loc_en_US, sid_WN0080, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_golfworks