The GolfWorks 8oz. Grip Solvent

The GolfWorks 8oz. Grip Solvent


GW 8oz. Grip Solvent -
$3.99
In Stock

The GolfWorks 8oz. Grip Solvent

PLEASE NOTE: Cannot Ship Via Air Service. No Ground Shipping to HI or AK. This economical solvent activates all solvent-activated tapes. Excellent for easy, efficient grip installation and shaft cleanup. Available in quart , gallon and 8 oz. containers.

The GolfWorks 8oz. Grip Solvent is rated 3.0 out of 5 by 2.
Rated 5 out of 5 by from Works as designed This was my 1st regrip and using Golf Works grip tape with THIER solvent made it very easy. Be sure to fill your grip 3/4 full with finger on hole. Shake for a few seconds and then pour over shaft covered in grip tape. I used a disposable paint tray to recover poured solvent and probably used 3 ozs of solvent while gripping 13 clubs. I picked up a small aluminium vice w the rubber shaft protector Golf Works sells that workes as designed as well. Just put your club square in vice then strip old grip and your new grips will be as square as your old ones.
Date published: 2017-04-13
Rated 1 out of 5 by from Not a good product Have used Mineral Spirits for years with no problem. Thought I would try this while buying other supplies. Dries to quick, Grip stopped sliding onto shaft about 3/4 of the way down the shaft. I have purchased many Golfworks Products, this is the only product that has not been satisfactory
Date published: 2015-04-03
  • y_2017, m_9, d_25, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_DKS0004, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Does this product help remove old tape from golf club shaft and does it work with graphite shafts? 

Asked by: Game gone
Yes it can be helpful for remove old grip tape residue but not the tape as a whole. For removing old grip tape I like to first warm the tape with a heat gun or hair dryer to soften the adhesive. The tape will generally come off easier after doing this. With some of the real thin grip tapes that some of the manufactures are using even warming the tape does not help much. Actually soaking it in water for a half hour or so can help otherwise you have to very carefully peel or scrape it off the shaft.
Answered by: JimY
Date published: 2017-07-24
  • y_2017, m_9, d_25, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_DKS0004, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks