The GolfWorks Air Powered Golf Grip Remover/Installer

The GolfWorks Air Powered Golf Grip Remover/Installer


Air Powered Grip Remover/Installer
$44.99
In Stock

The GolfWorks Air Powered Golf Grip Remover/Installer

The GolfWorks Air Powered Grip Remover/Installer Tool is a great alternative for removing old grips from golf shafts. The tool comes with a clear protective tube to prevent the grip from exploding during the removal process. Grips can also be installed at the manufactures recommended grip size by applying one layer of masking tape to the shaft butt eliminating the need for solvent.

Caution: Do not use the Air Powered Grip Remover with more than 35 PSI of air pressure.

The GolfWorks Air Powered Golf Grip Remover/Installer is rated 3.3 out of 5 by 9.
Rated 1 out of 5 by from Not what I expected from a Golfworks branded Far too expensive for what I received. Cheap air trigger mechanism. I could have made this with a $3.00 Harbor Freight air blow gun and a piece of PVC. I was surprised at the low quality. This is my first ever complaint with a GW branded item.
Date published: 2016-12-11
Rated 4 out of 5 by from Great Time Saver Had for a few weeks now. Works very well on most grips. Instructions are useful but call Customer service for some good inside tips (on removal especially). A little wd-40 and finesse work very well together. Learning curve is pretty short. I have arthritis in my hands so the excellent time savings are less important than the reduced wear and tear on my hands. Love it.
Date published: 2016-07-23
Rated 1 out of 5 by from Compressor installation tool I have used this tool for a couple of grip installation jobs. Works real well! Borrowed a compressor! Would be advantageous to know what parameters to look for when choosing a compressor. What minimum capacity should be considered? Would help to have this information available for future purchasers. Eliminates solvent odors in the house!
Date published: 2012-04-19
Rated 4 out of 5 by from Good product. Takes a little practice. Watch the YouTube videos before using. Works better for installing than removing. Easy to get grips on perfectly straight.
Date published: 2017-01-10
Rated 5 out of 5 by from Great product! Way faster, easier and cleaner! I was reluctant to buy thos at first but now really glad I did.
Date published: 2017-06-05
Rated 1 out of 5 by from Compressor installation tool I have used this tool for a couple of grip installation jobs. Works real well! Borrowed a compressor! Would be advantageous to know what parameters to look for when choosing a compressor. What minimum capacity should be considered? Would help to have this information available for future purchasers. Eliminates solvent odors in the house!
Date published: 2012-04-19
Rated 4 out of 5 by from works well works well if existing grip tape isn't folded over end of shaft, don't exceed the recommended 35 psi or the grip may explode during removal process. oil the trigger before use and use finesse. it will allow you to add and remove grips quickly during a fitting process
Date published: 2016-04-29
Rated 5 out of 5 by from Great tool for any golf shop Bought this a month ago and it has cut my time taking off grips in half
Date published: 2015-12-04
  • y_2017, m_10, d_18, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_GW0103, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What type of air pump do you need with this and be specif

Asked by: David
If you are just installing grips with air and not using double sided grip tape or solvent then a small compressor. I have a 1/2 horse Craftsman compressor at home similar to this one that works fine for me. http://www.harborfreight.com/1-5-hp-58-psi-compressor-and-airbrush-kit-95630.html If you are wanting to remove grips that have been installed with double sided grip tape then you would be better with a tank compressor. In our school here at GolfWorks we have this one. https://www.lowes.com/pd/PORTER-CABLE-6-Gallon-150-PSI-Electric-Pancake-Air-Compressor/4764588 It will also work for installing grips with air and not using double sided grip tape.
Answered by: JimY
Date published: 2017-04-17

Can you buy just the replacement cone by it self air gun is fine clear tubes is fine 

Asked by: Mak
We do not have the replacement cone for this air gun. Give Customer Service a call at 1-800-848-8358 and possibly we can work with you to get you a replacement.
Answered by: JimY
Date published: 2017-03-14

I want to replace the air compressor I have been using, which is to powerful. S what size of air compressor should I be looking at? Thanks!

Asked by: Ron Block
I have never really found the size of the compressor to be a problem as long as I could control the pressure. We use a smaller tank compressor in our school and if I am trying to remove a grip that has been installed with double sided grip tape and solvent I generally set the pressure at 70 lbs to start. If I am just installing grips with air and not using double sided grip tape and solvent I have used as low as 50 lbs of pressure. The same for removing grips that have been installed without double sided grip tape and solvent. I have removed them with 50 lbs. This is the compressor we use in the schools. https://www.lowes.com/pd/PORTER-CABLE-0-8-HP-6-Gallon-150-PSI-120-Volt-Pancake-Electric-Air-Compressor/4764588 At home to install grips without double side grip tape and solvent I use a 1/2 Horse Power tankless compressor that builds 50 lbs of pressure and it works fine. However it will not remove grips that have been installed with double sided grip tape and solvent.
Answered by: JimY
Date published: 2017-07-05

Are replacement needles available for this tool?

Asked by: Dick
We do not have any replacement needles for the Air Powered Grip Remover/Installer Tool. If you have not had it very long you might want to check with GolfWorks Canada to see if they might be able to help you.
Answered by: JimY
Date published: 2017-08-16

will this fit over midsize/oversize grips?

Asked by: idjut
Yes this will fit over midsize/oversize grips.
Answered by: JimY
Date published: 2015-11-10

will this remove a super stroke slim 3.0 , is the shield large enough ?

Asked by: today
The sleeve on the GW0103 is not large enough to fit over the Super Stroke 3.0. Removing a Super Stroke grip is difficult, but an experienced club technician should be able to to remove one using the VGGR V-Groove Grip Remover.
Answered by: GW2002
Date published: 2017-03-16

Will this work on clubs that have grip tape under grip?

Asked by: splashbud13
Yes, the GW0103 will work to remove grips with tape, and install grips with tape (with the use of solvent), however, it is not necessary to use to install a grip when tape and solvent is used.
Answered by: GW2002
Date published: 2017-01-27

Can I use this tool for removal of super stroke putter grips.

Asked by: maireadh
The tube will not cover the SuperStroke but it really should not be necessary to use the tube with the SuperStrokes. These grips just do not expand that much which can make it difficult to remove with air. I have had success saving SuperStrokes using the V-Groove Grip Remover. http://www.golfworks.com/product.asp?pn=VGGR
Answered by: JimY
Date published: 2014-12-31
  • y_2017, m_10, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_GW0103, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks