The GolfWorks Bench Top Bending Machine Stand

The GolfWorks Bench Top Bending Machine Stand


The GolfWorks Bench Top Bending Machine Stand
$139.99
In Stock

The GolfWorks Bench Top Bending Machine Stand

For golf repair shops that are unable to affix a permanent bending machine stand to the floor or are limited in work space, The GolfWorks Bench Top Bending Machine Stand is the perfect tool. The Bench Top Stand rotates 360 to allow you to bend loft and lie on both right and left handed golf clubs from one stationary position. Once the machine is in the desired bending position the Bench Top Stand can be quickly and securely locked into place by tightening the two machine locks. Mounting holes are pre-drilled to accept any of the Maltby or GolfWorks (GW0053, MA2017 & MA2019) bending machines.
The GolfWorks Bench Top Bending Machine Stand is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Works well with others I had purchased a bending machine from Golfsmith but they don't offer a bench top stand. I purchased this stand thinking if it doesn't fit I could have matching holes drilled. The existing holes match perfectly. No drilling required.
Date published: 2016-07-17
Rated 5 out of 5 by from Great Product I bought this and installed it on my bender stand with little a medal plate, Now I have 360 degree access for both right and Left hand Clubs
Date published: 2016-02-26
Rated 5 out of 5 by from Well bulit It is a very well built and sturdy piece of equipment.
Date published: 2015-08-20
  • y_2017, m_10, d_18, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_GW0102, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I purchased this item back in 2015. I've used it a few times since then with my bending machine, mounted on my work bench. It is now not locking down securely any longer. Is there something I can do to this to tighten it down? Thanks!

Asked by: Brian
There are a few options. 1. Make sure the locking handles are locking down properly 2. Take it apart and clean the parts. If any lubricant gets on the parts it made stop it from locking 3. If you sent it in we can check / repair it.
Answered by: JimY
Date published: 2017-10-10

When will you be receiving more

Asked by: JR23
You will need to call GolfWorks Canada to see when they expect to have this item in stock. We have it in stock here in the US and ship to GolfWorks Canada on a regular basis. It is likely they never keep many of these in stock at a time. 1-800-387-5331
Answered by: JimY
Date published: 2017-09-11

When will you be getting more in stock

Asked by: J23
It would be best to contact GolfWorks Canada to see when they expect to have this in stock. We have it in stock here in the US and ship to GolfWorks Canada on a regular basis. They would not stock very many of these at a time. 1-800-387-5331 https://www.golfworks.ca/contact-us/a/222/
Answered by: JimY
Date published: 2017-09-05

Will the golf machanic 150210 line up to the holes

Asked by: J23
I would say the 150210 bending machine should fit our GW0102 Bench Top Stand. We do not stock the 150210 to be able to check the hole patterns but our hole pattern is the same as the hole pattern on the Golf Mechanix 150705 Bench Top Stand so I would expect it to fit.
Answered by: JimY
Date published: 2017-09-01

Does this fit Mitchell loft/lie machine??

Asked by: repairman
Mitchell products do not fit the GW0102 Golfworks Bench Top Bending Machine Stand.
Answered by: GW2002
Date published: 2017-04-08

Does this fit the Value LIne Bending Machine?  There are no mounting holes in the unit so I m not sure how it would be mounted.

Asked by: JOSH
The Value Line Bending Machine (VAM) is designed to be mounted in a bench vise only and will not work with any of our stands.
Answered by: JimY
Date published: 2017-03-27

I have an MR3 True Blue bending machine. My bolting pattern on the base of the True Blue is a 4 bolt, (2 rows), pattern – 177 mm long and 68mm wide. Bolts are 9 mm diameter. Will it accept that? Will present hole pattern interfere with adaption?

Asked by: fhann
No the bolt pattern from the True Blue MR3 does not match up to the bolt pattern on this stand. I spoke with the person in charge of our machine shop and he says we could either make an adapter plate of drill the holes into the stand. We would need to know the total length and width of the base and would like to have a picture of the machine you have to make sure we get everything set up correctly. You can email me at jyachinich@golfworks.com.
Answered by: JimY
Date published: 2017-02-02

does this fit the golf smith pro loft/lie machine?

Asked by: mul1gan
I have a less expensive machine from Golfsmith and the holes match perfect.
Answered by: Walkin 18
Date published: 2016-07-18
  • y_2017, m_10, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_GW0102, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks