The GolfWorks Bench Top Bending Machine Stand

The GolfWorks Bench Top Bending Machine Stand


The GolfWorks Bench Top Bending Machine Stand
$139.99
Backordered

The GolfWorks Bench Top Bending Machine Stand

For golf repair shops that are unable to affix a permanent bending machine stand to the floor or are limited in work space, The GolfWorks Bench Top Bending Machine Stand is the perfect tool. The Bench Top Stand rotates 360 to allow you to bend loft and lie on both right and left handed golf clubs from one stationary position. Once the machine is in the desired bending position the Bench Top Stand can be quickly and securely locked into place by tightening the two machine locks. Mounting holes are pre-drilled to accept any of the Maltby or GolfWorks (GW0053, MA2017 & MA2019) bending machines.
The GolfWorks Bench Top Bending Machine Stand is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Works well with others I had purchased a bending machine from Golfsmith but they don't offer a bench top stand. I purchased this stand thinking if it doesn't fit I could have matching holes drilled. The existing holes match perfectly. No drilling required.
Date published: 2016-07-17
Rated 5 out of 5 by from Great Product I bought this and installed it on my bender stand with little a medal plate, Now I have 360 degree access for both right and Left hand Clubs
Date published: 2016-02-26
Rated 5 out of 5 by from Well bulit It is a very well built and sturdy piece of equipment.
Date published: 2015-08-20
  • y_2017, m_3, d_28, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_GW0102, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Does this fit the Value LIne Bending Machine?  There are no mounting holes in the unit so I m not sure how it would be mounted.

Asked by: JOSH
The Value Line Bending Machine (VAM) is designed to be mounted in a bench vise only and will not work with any of our stands.
Answered by: JimY
Date published: 2017-03-27

I have an MR3 True Blue bending machine. My bolting pattern on the base of the True Blue is a 4 bolt, (2 rows), pattern – 177 mm long and 68mm wide. Bolts are 9 mm diameter. Will it accept that? Will present hole pattern interfere with adaption?

Asked by: fhann
No the bolt pattern from the True Blue MR3 does not match up to the bolt pattern on this stand. I spoke with the person in charge of our machine shop and he says we could either make an adapter plate of drill the holes into the stand. We would need to know the total length and width of the base and would like to have a picture of the machine you have to make sure we get everything set up correctly. You can email me at jyachinich@golfworks.com.
Answered by: JimY
Date published: 2017-02-02

does this fit the golf smith pro loft/lie machine?

Asked by: mul1gan
I have a less expensive machine from Golfsmith and the holes match perfect.
Answered by: Walkin 18
Date published: 2016-07-18

does this fit the golf smith professional machine?

Asked by: mul1gan
We have no idea if the Golfsmith Professional Machine will fit this stand. We do not have the mounting pattern for the Golfsmith Machine to be able to make that comparison.
Answered by: JimY
Date published: 2016-06-06

Does This fit the Maltby Putter Bending Machine MA2012?

Asked by: Clubmaker
The GW0102 stand is designed to work with the MA2012.
Answered by: GW2002
Date published: 2016-04-13

What are the overall dimensions?

Asked by: walterh
13 3/4" wide 3 1/8" tall 7 1/2" deep at the base The base is 7 1/2" square
Answered by: JimY
Date published: 2016-02-02

How much does it weigh ready for shipping?

Asked by: golffitter
Shipping weight is 17 lbs. Because of the weight there is an additional $10.00 charge to the normal shipping rate.
Answered by: JimY
Date published: 2015-07-14

Does this bench top stand accommodate a Scotland loft and lie machine with respect to the pre-drilled holes?

Asked by: shagbag541
How much does it weigh ready for shipping?
Answered by: golffitter
Date published: 2017-01-27
  • y_2017, m_3, d_28, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_GW0102, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks