The GolfWorks Broken Graphite Shaft Extractor

The GolfWorks Broken Graphite Shaft Extractor


Broken Graphite Shaft Extractor
$9.99
In Stock

The GolfWorks Broken Graphite Shaft Extractor

A handy little tool to easily remove graphite shafts broken off at the hosel of wood and iron heads. This tool concept was developed by professional clubmaker Patrick Kennedy and is a real time saver. To use, drill a pilot hole using a 7/32" drill bit and screw in the Broken Graphite Shaft Extractor. Place the Broken Graphite Shaft Extractor into any Graphite Shaft Extractor for easy shaft tip removal.

Not Found.

Just what is it you get for $13.00?

Asked by: Bill
You get the T handle screw for $13.90. The graphite shaft puller is not included.
Answered by: JimY
Date published: 2017-04-10

How does that work ?

Asked by: sammie
You start by using a 7/32" drill bit and drill down 1" into the hole in the center of the broken graphite shaft. Next thread the screw down into the shaft. Clamp the Broken Shaft Extractor into a Graphite Shaft Puller. Heat the hosel with a heat gun and use the Graphite Shaft Puller to remove the shaft. If you have a GolfWorks catalog on the top of page 162 is a picture showing how this is used with the Graphite Shaft Puller. If you do not have a catalog at this link go to page 162 and you can see how it is used. http://mydigimag.rrd.com/publication/?i=294516
Answered by: JimY
Date published: 2016-05-25
  • y_2017, m_5, d_22, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_GW0025, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks