The GolfWorks Broken Graphite Shaft Extractor

The GolfWorks Broken Graphite Shaft Extractor


Broken Graphite Shaft Extractor
$9.99
In Stock

The GolfWorks Broken Graphite Shaft Extractor

A handy little tool to easily remove graphite shafts broken off at the hosel of wood and iron heads. This tool concept was developed by professional clubmaker Patrick Kennedy and is a real time saver. To use, drill a pilot hole using a 7/32" drill bit and screw in the Broken Graphite Shaft Extractor. Place the Broken Graphite Shaft Extractor into any Graphite Shaft Extractor for easy shaft tip removal.

The GolfWorks Broken Graphite Shaft Extractor is rated 4.0 out of 5 by 5.
Rated 5 out of 5 by from Works Perfect I own the puller shown in the photo. I do some repairs locally on the side for friends and such and had 2 shafts that had snapped off directly above the adapter. Wasn't sure what to expect but for $20, why not see. Took me all of 15 seconds to extract the broken shaft and now the adapter is installed on a new shaft and back to it's owner. Highly recommended.
Date published: 2017-05-31
Rated 5 out of 5 by from Broken Shaft Extractor This is a great tool. In fact it's the same one that by brother a long time professional club maker developed several years ago in his workshop in Vermont.
Date published: 2010-04-09
Rated 5 out of 5 by from Broken Shaft Extractor This is a great tool. In fact it's the same one that by brother a long time professional club maker developed several years ago in his workshop in Vermont.
Date published: 2010-04-09
Rated 4 out of 5 by from It works! I have used the product once and it did the job. Shafts broken at the hosel have always been an issue for me but I would hope that is in the past.
Date published: 2015-11-07
Rated 1 out of 5 by from Broken shaft extracter Extracter broke the first time I screwed it in, added heat with a heat gun, handle came away with the screw part now needing to be extracted
Date published: 2014-12-22
  • y_2017, m_9, d_24, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_GW0025, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

what is broken? could you send a picture? I can weld if necessary

Asked by: lfalsetto
If you have something that is broken on this shaft puller we manufacture it at our facility here in Newark, OH and should be able to fix or repair it. You would need to contact Customer Service at 1-800-848-8358 and they can help you.
Answered by: JimY
Date published: 2017-09-11

Just what is it you get for $13.00?

Asked by: Bill
You get the T handle screw for $13.90. The graphite shaft puller is not included.
Answered by: JimY
Date published: 2017-04-10

How does that work ?

Asked by: sammie
You start by using a 7/32" drill bit and drill down 1" into the hole in the center of the broken graphite shaft. Next thread the screw down into the shaft. Clamp the Broken Shaft Extractor into a Graphite Shaft Puller. Heat the hosel with a heat gun and use the Graphite Shaft Puller to remove the shaft. If you have a GolfWorks catalog on the top of page 162 is a picture showing how this is used with the Graphite Shaft Puller. If you do not have a catalog at this link go to page 162 and you can see how it is used. http://mydigimag.rrd.com/publication/?i=294516
Answered by: JimY
Date published: 2016-05-25
  • y_2017, m_9, d_24, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_GW0025, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks