The GolfWorks Cut-Off, Chop Saw

The GolfWorks Cut-Off, Chop Saw


The GolfWorks® Cut-Off Saw
$54.99
In Stock
Replacement 6" Cut-Off Wheel
$4.99
In Stock

We Also Recommend

The GolfWorks Cut-Off, Chop Saw

The GolfWorks High Speed Cut-Off machine will easily cut any graphite or steel shaft. The base plate features an adjustable guide that will allow you to pre-cut the angles on a shaft for a through-bore wood or ironhead. The GolfWorks High Speed Cut-Off Machine is portable and does not need to be mounted to a bench. Note: includes one blade! Portable and lightweight. Uses 6” wheels.



Please Note: Additional shipping charges required due to weight.
The GolfWorks Cut-Off, Chop Saw is rated 4.2 out of 5 by 9.
Rated 2 out of 5 by from A disappointment I bought this for using sparingly as I don't do a lot of club work. I have only cut graphite shafts so far and it does a decent job. Can't comment on steel shafts yet. The adjustable guide on the base is totally worthless as the zero mark is anything but useful. I had to use a small square to line up the guide with the saw blade to make a straight cut. Would have to do the same to make any angle cuts. Either the hole for the guide is in the wrong place or the angle marks on the base are. As a side note the motor is rather noisy. I probably would have been better off buying a different blade for the chop saw I already have.
Date published: 2015-02-16
Rated 4 out of 5 by from Good saw Baught this saw to cut my irons and some new sticks for my son..with hopes it would be fast enough to cut carbon arrows. It surpassed my hopes when it cut through arrow like butter!!
Date published: 2015-12-27
Rated 3 out of 5 by from works fine the saw itself works fine, however I had to remove the parts that were added to the platform. they had no purpose and made cutting shafts way more difficult
Date published: 2016-10-11
Rated 5 out of 5 by from Greeat Value! Great value! Extremely well made and not a "hobby" style chop saw! Comes ready-to-go and is easy to use. Does an excellent job cutting graphite shafts.
Date published: 2012-04-14
Rated 5 out of 5 by from Greeat Value! Great value! Extremely well made and not a "hobby" style chop saw! Comes ready-to-go and is easy to use. Does an excellent job cutting graphite shafts.
Date published: 2012-04-14
Rated 4 out of 5 by from Cut off saw. Great saw for cutting off golf shafts & other small jobs. I have two. One for my home in fl.& one for my home Oh.
Date published: 2016-03-02
Rated 5 out of 5 by from Handy tool for club repair. Excellent product and works extremely well. Saves time and helps achieve good results when cutting shafts.
Date published: 2015-11-02
Rated 5 out of 5 by from Great saw This saw is perfect for the small amount of club work that I do. It takes up very little space.
Date published: 2016-08-13
  • y_2017, m_6, d_23, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_CSM6, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Jim Y, I bought your version of this saw in 2001. The cutting wheel has now worn down to about 3 1/2 inch diameter. Somehow over the past 15 years, the tools for removing the cutting wheel have disappeared. Do you guys still have these? Home Depot?

Asked by: NebTiffam
We do have extra wrenches for the Chop Saw. Contact Customer Service and they can help you with this. Be sure to tell them you have an older model saw because the wrenches changed over the years. 1-800-848-8358.
Answered by: JimY
Date published: 2017-05-23

How do you replace the blade? I can't get the old blade off.

Asked by: Wayne
Here is a link to the instructions and there is a note about changing the blade. https://www.golfworks.com/images/art/CSM6.pdf You should have received 2 wrenches with the saw. One is used to loosen and remove the screw that holds the blade. The other wrench is use to hold the drive shaft to keep it from turning when you remove the screw holding the blade. On the top of the saw to the left of the guard there is a slot for the second wrench where it fits on the drive shaft. Insert the wrench into this slot and rotate the blade until the wrench drops correctly onto the shaft. Then use the other wrench to remove the screw holding the blade.
Answered by: JimY
Date published: 2017-05-22

Can the alignment fence be mechanically adjusted for squaring the shaft in the cutting zone or is it fixed? Looking at the picture, it does appear that it's positioned too far foward of the cutting blade for it to be an effective guide.

Asked by: Birddog
The fence will adjust from 0 to 45 degrees. It is very seldom that I would adjust it from 0 with the exception for cutting the angle on a bore through shaft and even some of those angles are greater then 45 degrees.
Answered by: JimY
Date published: 2016-12-29

What type of blade is needed for graphite?

Asked by: Big Pappa
The blade that comes installed on the saw will cut both steel and graphite shaft very well. http://www.golfworks.com/the-golfworks-cut-off-chop-saw/p/CSM6/
Answered by: JimY
Date published: 2016-11-14

What is rpm of cutting disc?

Asked by: Dick
The speed of the Chop Saw is 8500 rpm's.
Answered by: JimY
Date published: 2016-08-01

How long should the cut-off wheels last? I've cut a couple of steel shaft sets and now it's struggling with the latest steel shaft set. Also, any recommendations to keep dust and sparks in-place? Hoping to keep my work area as clean as possible.

Asked by: mikeberlin
I would expect it to last longer then 3 sets of steel shafts. I do not have an exact number but cutting steel shafts will wear it faster then cutting graphite shafts. The wear from the blades can vary a little from one to the next but they generally do not vary much. If you have a shop vac and you can fasten some type of a clamp that will hold the nozzle from the shop vac near the saw you can use it as dust collection. Not much you can do about the sparks when cutting steel shafts.
Answered by: JimY
Date published: 2016-04-18

How do I get a replacement wrench to take off blade

Asked by: Joe
We do have some extra wrenches available in our Returns Dept. Please contact our Customer Service Department at 1-800-848-8358 or by email at golfworks@golfworks.com and they will be able to help you.
Answered by: JimY
Date published: 2016-03-21

How heavy is this?  Is it stable?  Don't want to have it fixed to the table. 

Asked by: Chris B
You can also use this on a table top. It is very stable and does not need to be mounted. We use it all the time without it being mounted.
Answered by: JimY
Date published: 2016-02-29
  • y_2017, m_6, d_23, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_CSM6, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks