The GolfWorks High Strength Epoxy

The GolfWorks High Strength Epoxy

50 ml. Cartridge, 1 Part A, 1 Part B
In Stock
8oz. EZ Pour, 1 Part A, 1 Part B
In Stock
16oz. EZ Pour, 1 Part A, 1 Part B
In Stock
32oz. EZ Pour, 1 Part A, 1 Part B
In Stock
64oz. EZ Pour, 1 Part A, 1 Part B
In Stock

The GolfWorks High Strength Epoxy

This high-impact, high-strength epoxy is formulated for clubmakers. Creates a very strong bond. High shear strength for very high torque resistance. Available in 50 ml. cartridge as well as in squeeze bottles.
The GolfWorks High Strength Epoxy is rated 4.9 out of 5 by 9.
Rated 5 out of 5 by from Not Just For Clubs Decided to try this epoxy because it was a great price and it is black. Easier to use than clear. I have used this epoxy on clubs and on several boat and car projects. With the 4 hour working time, I have plenty of time to set up several projects at one time. The product is easy to mix, easy to apply and when dry has just the perfect balance of strength and flexibility. The viscosity is just right to allow it to flow out to a smooth finish. Highly recommended for all projects requiring epoxy.
Date published: 2011-06-16
Rated 5 out of 5 by from Great epoxy, really like it for expensive heads On occasion when you epoxy a head or set leave it on your bench to dry overnight and come in the next day you will find that you got some seepage and there is some epoxy on the outside of the hosel, with my old epoxy from litco and then Intregal Products this was disaster, as even with a new razor blade it was very difficult to get off and has ruined many heads over the years. What I like about this epoxy is that if that happens it seems to be not 100% hardened and for the most part I can scrape it off with my fingernail, if that's not enough I can easily clean it up with a new razor blade, then turn the ferrule and polish it with acetone and wallah beauty. I concentrate on Miura and Epon products which are terribly expensive and I cannot afford to ruin a head, this epoxy ensures that I don't. Also my old supplier wanted me to buy a case to get the same price I had gotten for many years, well epoxy has a shelf life and I don't want to buy a case, to buy single big bottle of A and B they were almost double what Golfworks is. Thanks, David
Date published: 2015-09-01
Rated 5 out of 5 by from Good stuff! Bought the 24 hour epoxy because I like taking my time getting the shaft in and turned to where I want it, no hurry, no worry. Clean up was a breeze and clubs are solid as a rock. First timers, just follow directions.
Date published: 2016-11-27
Rated 5 out of 5 by from Great epoxy product I made many sets of clubs, never had a head or iron come undone. I also use this for lots of other projects to glue together fiberglass and other substraights; works on everything. Also on metal pipes, aluminum, glass plexiglass it works well. I buying more to seal an old car frame from rusting, after sandblasting. also you can add West Epoxy cotton fillers to make it thicker to fill surface pock marks. Good golfing Paul
Date published: 2012-01-05
Rated 4 out of 5 by from Very good shafting epoxy. I've been using this shafting epoxy for about 15 years or more. It is also good for D.I.Y.'ers. I've found many uses for it. It works well for adding shaft extensions also. As my vision gets worse I sometimes have a problem measuring the 2 parts equally but it has been forgiving if I didn't get the two parts equal. I add shafting beads when I build a new club or replace a shaft for a friend. I would definitely recommend it to a friend.
Date published: 2014-10-07
Rated 5 out of 5 by from This epoxy lasts forever I have had the 4oz bottles for about 15 years now and it still flows and bonds up solid. I would get fresh for club heads but the way it still sets up bet I could get away with using this 15 year old stuff. I am getting more this week end from Westbury store in case I need it and before my state wont allow it anymore.
Date published: 2014-12-11
Rated 5 out of 5 by from dependable previously had used Golfsmith epoxy which was too viscose,ran, and created poor bonds. This epoxy is easy to work with when doing an entire set or just a single club. Not runny and provides a solid proven bond.
Date published: 2012-05-26
Rated 5 out of 5 by from does what it's meant to do No worries about dependability, use what the pros use. My 8 iron is like new
Date published: 2016-01-22
  • y_2017, m_3, d_28, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_EPX1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

after epoxy do I set the club leaning against a wall upright so that it's on its toe or on the sole so that it's in its playing position while I wait for it to cure?

Asked by: andy15
Playing position is OK. The main thing is that the club head is down, so the epoxy can not run up the shaft.
Answered by: GW2002
Date published: 2017-03-21

What is the set time for the Golfworks High strength epoxy>

Asked by: Chief T
The EPX1 epoxy has a 2 hour gel time (working time), 18 hour playable cure and 24 hour full cure at room temperature (approximately 70-77 degrees F).
Answered by: GW2002
Date published: 2017-03-15

I have this epoxy in the squeeze bottle and find that the Part A separates if I don't use it for a while with a clear portion settling on top.  If I turn the bottle upside down it eventually recombines with the black portion.  Is it still good to use?

Asked by: Tommyj
I have had this happen as well and it will still work fine. Our epoxy distributor told me to warm the epoxy and then shake it to mix it.
Answered by: JimY
Date published: 2017-03-13

do i mix 1:1 or 1:2 for Part A:B? for the cartridge is the epoxy gun necessary? or could i dispense on a board and mix together with a stick?

Asked by: andy15
The EPX epoxies are a 1:1 mix. For the EPX1 epoxy cartridge a hand plunger comes with the cartridge so a gun is not necessary.
Answered by: JimY
Date published: 2017-02-25

Is that price for both A % B or per single bottle

Asked by: Willie
Yes the price is for both parts A & B.
Answered by: JimY
Date published: 2017-02-25

Have had problems with your 24 hour epoxy curing. Part B has a strong ammonia smell and appears to be the culprit. Have used an older bottle of part B and it hardens rock solid. Have you had anyone complain?

Asked by: Bryan
I have spoken with our epoxy distributor and he tells me they have not had any problems that they have been made aware of. He did ask me if it would be possible to get this epoxy back so that we can sent it to them for evaluation. You can contact me at and I will see if we can issue a call tag to get this sent back in.
Answered by: JimY
Date published: 2017-01-23

What Epoxy do you recommend for fixing my loose putter head ?

Asked by: Mike 56
Personally I always prefer to use the EPX GolfWorks High Strength Epoxy.
Answered by: JimY
Date published: 2017-01-06

Does the Golfworks epoxy work with "epoxy heat cure systems" to dry in 30 minutes?

Asked by: Philip
Yes the EPX epoxies will work with the "epoxy heat cure systems" to set in 30 minutes.
Answered by: JimY
Date published: 2017-01-05
  • y_2017, m_3, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_43
  • loc_en_US, sid_EPX1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks