The GolfWorks High Strength Epoxy

The GolfWorks High Strength Epoxy


50 ml. Cartridge, 1 Part A, 1 Part B
$5.99
In Stock
8oz. EZ Pour, 1 Part A, 1 Part B
$8.99
In Stock
16oz. EZ Pour, 1 Part A, 1 Part B
$14.99
In Stock
32oz. EZ Pour, 1 Part A, 1 Part B
$21.99
In Stock
64oz. EZ Pour, 1 Part A, 1 Part B
$38.99
In Stock

The GolfWorks High Strength Epoxy

This high-impact, high-strength epoxy is formulated for clubmakers. Creates a very strong bond. High shear strength for very high torque resistance. Available in 50 ml. cartridge as well as in squeeze bottles.
The GolfWorks High Strength Epoxy is rated 4.9 out of 5 by 13.
Rated 5 out of 5 by from Not Just For Clubs Decided to try this epoxy because it was a great price and it is black. Easier to use than clear. I have used this epoxy on clubs and on several boat and car projects. With the 4 hour working time, I have plenty of time to set up several projects at one time. The product is easy to mix, easy to apply and when dry has just the perfect balance of strength and flexibility. The viscosity is just right to allow it to flow out to a smooth finish. Highly recommended for all projects requiring epoxy.
Date published: 2011-06-16
Rated 5 out of 5 by from This epoxy lasts forever I have had the 4oz bottles for about 15 years now and it still flows and bonds up solid. I would get fresh for club heads but the way it still sets up bet I could get away with using this 15 year old stuff. I am getting more this week end from Westbury store in case I need it and before my state wont allow it anymore.
Date published: 2014-12-11
Rated 5 out of 5 by from Not Just For Clubs Decided to try this epoxy because it was a great price and it is black. Easier to use than clear. I have used this epoxy on clubs and on several boat and car projects. With the 4 hour working time, I have plenty of time to set up several projects at one time. The product is easy to mix, easy to apply and when dry has just the perfect balance of strength and flexibility. The viscosity is just right to allow it to flow out to a smooth finish. Highly recommended for all projects requiring epoxy.
Date published: 2011-06-16
Rated 5 out of 5 by from Great epoxy, really like it for expensive heads On occasion when you epoxy a head or set leave it on your bench to dry overnight and come in the next day you will find that you got some seepage and there is some epoxy on the outside of the hosel, with my old epoxy from litco and then Intregal Products this was disaster, as even with a new razor blade it was very difficult to get off and has ruined many heads over the years. What I like about this epoxy is that if that happens it seems to be not 100% hardened and for the most part I can scrape it off with my fingernail, if that's not enough I can easily clean it up with a new razor blade, then turn the ferrule and polish it with acetone and wallah beauty. I concentrate on Miura and Epon products which are terribly expensive and I cannot afford to ruin a head, this epoxy ensures that I don't. Also my old supplier wanted me to buy a case to get the same price I had gotten for many years, well epoxy has a shelf life and I don't want to buy a case, to buy single big bottle of A and B they were almost double what Golfworks is. Thanks, David www.miuragolfcoast.com
Date published: 2015-09-01
Rated 5 out of 5 by from Good stuff! Bought the 24 hour epoxy because I like taking my time getting the shaft in and turned to where I want it, no hurry, no worry. Clean up was a breeze and clubs are solid as a rock. First timers, just follow directions.
Date published: 2016-11-27
Rated 5 out of 5 by from Great epoxy product I made many sets of clubs, never had a head or iron come undone. I also use this for lots of other projects to glue together fiberglass and other substraights; works on everything. Also on metal pipes, aluminum, glass plexiglass it works well. I buying more to seal an old car frame from rusting, after sandblasting. also you can add West Epoxy cotton fillers to make it thicker to fill surface pock marks. Good golfing Paul
Date published: 2012-01-05
Rated 5 out of 5 by from Great epoxy product I made many sets of clubs, never had a head or iron come undone. I also use this for lots of other projects to glue together fiberglass and other substraights; works on everything. Also on metal pipes, aluminum, glass plexiglass it works well. I buying more to seal an old car frame from rusting, after sandblasting. also you can add West Epoxy cotton fillers to make it thicker to fill surface pock marks. Good golfing Paul
Date published: 2012-01-05
Rated 4 out of 5 by from Very good shafting epoxy. I've been using this shafting epoxy for about 15 years or more. It is also good for D.I.Y.'ers. I've found many uses for it. It works well for adding shaft extensions also. As my vision gets worse I sometimes have a problem measuring the 2 parts equally but it has been forgiving if I didn't get the two parts equal. I add shafting beads when I build a new club or replace a shaft for a friend. I would definitely recommend it to a friend.
Date published: 2014-10-07
  • y_2017, m_9, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_EPX1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Cure time for the EPX epoxy

Asked by: Bud
The EPX epoxies cure to 90% in 24 hours and 100% in 7 days. The club is playable in 24 hours.
Answered by: JimY
Date published: 2017-08-30

what is the working and cure time for the EPX*

Asked by: derf902
The EPX epoxy has approximately a 45 minute working time. It cures to 90% in 24 hours and 100% in 7 days. The clubs are playable in 24 hours.
Answered by: JimY
Date published: 2017-07-31

What is the working for this epoxy? 

Asked by: William56
Once it is mixed you generally have about a 45 minute working time with the EPX epoxy.
Answered by: JimY
Date published: 2017-07-10

I see you recommend a 30 minute cure time for a heat cure system at what temperature do you recommend? I am going to order the Golf Mechanix heat cure system and want to be sure to use it with the correctly. Also do you have data sheets with heat times?

Asked by: calcustomgolf
The only information we have is what is listed on this web site. If you scroll down the page you can read the description. Here is a link from the manufactures web site with a little more information. This is the information that comes in the box with the machine. http://www.golfmechanix.com/src/pdf/200323.pdf
Answered by: JimY
Date published: 2017-05-26

30/60 epoxy at 70 degrees how many hours before a I can use this driver?

Asked by: Jcfrem
The manufacture says at room temperature, which they list at 76 degrees, this epoxy will set in 6 to 7 hours. This epoxy cures to 90% in 24 hours and 100% in 7 days. The driver would be playable in 24 hours.
Answered by: JimY
Date published: 2017-05-22

I only need enough epoxy for 8 individual irons. Would the 50 ml cartridge of 1 part A and 1 part B work for that? Can you use that cartridge alone or does it need a gun? Is this epoxy mix 1 to 1?

Asked by: Dennis
The EPX1 cartridge will be more then enough to do 8 irons. This cartride comes with a plunger and does not need the gun. It is a 1:1 mix epoxy.
Answered by: JimY
Date published: 2017-04-14

Is this epoxy a 50/50 mix?

Asked by: Tom Byers
Yes the EPX epoxies are a 1:1 mix.
Answered by: JimY
Date published: 2017-04-04

after epoxy do I set the club leaning against a wall upright so that it's on its toe or on the sole so that it's in its playing position while I wait for it to cure?

Asked by: andy15
Playing position is OK. The main thing is that the club head is down, so the epoxy can not run up the shaft.
Answered by: GW2002
Date published: 2017-03-21
  • y_2017, m_9, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_52
  • loc_en_US, sid_EPX1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks