The GolfWorks Hosel Cleaning System

The GolfWorks Hosel Cleaning System


GW Hosel Cleaning System Complete Kit
$14.99
In Stock
Hosel Brush Handle
$2.99
In Stock
Hosel Cleaning Cotton Brush Iron
$1.99
In Stock
Hosel Cleaning Cotton Brush Wood
$1.99
In Stock
Long Stem Wire Brush I370
$3.99
In Stock
Long Stem Wire Brush W335
$3.99
In Stock
Long Stem Wire Brush W350
$3.99
In Stock

The GolfWorks Hosel Cleaning System

The GolfWorks new hosel cleaning system is ideal for all hosel cleaning necessities. The long stemmed industrial brushes easily clean standard hosels and the extended 4 stem length works much better on thru-bore hosels than standard hosel cleaning brushes. The brush sizes have been specifically designed for modern club head bore sizes (.335", .350" & .370") which increases the life and durability of the brushes. Soaking the industrial strength cotton swab hosel brushes in acetone or mineral spirits and inserting into the club head hosels will clean out any oil or epoxy residue that may negatively affect the new epoxy bond during assembly. All brushes are threaded and can be used with the same universal wooden handle.

GW1054 Kit: Includes Handle, 3 wire, 2 cotton brushes

Not Found.

Can this be used to clean out shaft adapter tips ?

Asked by: Erock
Yes this could be used to clean out a shaft adapter.
Answered by: JimY
Date published: 2016-12-20

will this item work for cleaning out epoxy from the tip of 0.355 steel shafts?

Asked by: mjr
If the epoxy is set up and hard these brushes will not work. You would first need to drill out any epoxy and possibly even heat the tip of the shaft before these brushes or any brushes will work that well for removing epoxy from inside a steel shaft.
Answered by: JimY
Date published: 2016-05-05

I just received my kit. I have three wire brushes, W335,W350 and I370. Which are to be used for woods and which for irons or does it matter?

Asked by: Lobo Rick
W335 is for wood that have a .335" hosel bore size. W350 is for woods that have a .350" hosel bore size and I370 is for Irons that have a .370" hosel bore size.
Answered by: JimY
Date published: 2015-09-22
  • y_2017, m_5, d_25, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_GW1054, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks