The GolfWorks Industry Standard Grip Tape

The GolfWorks Industry Standard Grip Tape


DFTG2 - 48mm x 36yd Roll Grip Tape
$11.49
In Stock
DFTG1 - 18mm x 36yd Roll Grip Tape
$5.99
In Stock
DFTG218 - 48mm x 18yd Roll Grip Tape
$6.99
In Stock
DFTG210 - Grip Tape 2" x 10" Single Strip
$0.35
In Stock

The GolfWorks Industry Standard Grip Tape

The industry standard tape for installing slip-on or leather grips. Sticky on both sides and activated with solvent. Also keeps grip collars in place. Choose from 18mm wide for spiral winding or 48mm wide for faster length-wise application (preferred by most clubmakers). Also available in a shorter 18yd roll and 10" pre-cut strips.
The GolfWorks Industry Standard Grip Tape is rated 4.9 out of 5 by 30.
Rated 4 out of 5 by from Wide grip tape does what it is supposed to do As a 30+ year customer with Golfworks, I can attest 99% of the products are top quality and do what they are supposed to do. The staff and shipping are accomplished and fast. When I do get a product that is less than satisfactory, then Golfworks works to make it correct. I like this wide grip tape because I build up the underlistings of many grips, and a wider, thicker piece of tape is faster than wrapping the less wide tapes. Golfworks tape is a true masking tape variety, and I like it better than some of the other companies' thinner thickness tapes. They are little more than sticky films; this is a real tape. I feel like that I will continue to order this tape for a decade to come.
Date published: 2015-09-05
Rated 5 out of 5 by from Improved since my last purchase This purchase was a reorder and it seems like the tape has actually,improved since last time. It is still sticky on both sides. However, it seems like the paper backing that helps when applying the tape to the shaft comes off quicker. I used to have to wait about 30 seconds for the paper backing to start releasing. Now, it starts releasing almost as soon as the tape gets applied. This is a very nice improvement (assuming it was an intentional design and not just a different level of sticking the tape to the grip). I'm going to assume the best and give it 5 stars. If,it turns out to be either accidentally better or worse, inconsistent, I write another review later.
Date published: 2016-08-08
Rated 5 out of 5 by from Easy to use I do most of the gripping of clubs at my golf course. This product has been very easy to use and I would recommend it
Date published: 2015-07-09
Rated 5 out of 5 by from Great I just re-gripped my friends clubs using this grip tape and the rest of what I bought at GolfWorks. Everything was great and so easy to use. I highly recommend these items. They make re-gripping a snap. (Items were: grip tape, grip solvent, and the GolfWorks quick grip device).
Date published: 2016-02-02
Rated 4 out of 5 by from Good Variety, Good Quality Merchandise Ask for their catalog. I've been doing business with them for 10 to 12 years now and they have everything you need to build and maintain golf clubs. Good service.
Date published: 2015-07-03
Rated 5 out of 5 by from Great tape I have used this tape for years and it always works great, even when it sits in my garage for months at a time it still holds up well and retains its stickiness.
Date published: 2015-11-29
Rated 5 out of 5 by from Still the best grip tape available!!! Over the years I have used every tape available this is consitantly the best
Date published: 2015-06-04
Rated 3 out of 5 by from Actually a little disappointing! This tape was a disappointing in that the adhesive was not consistent. This was only noted to be true on the "sticky" side, not the top side that is activated with solvent. It remains to be seen if this results in any problems.
Date published: 2015-06-16
  • y_2017, m_6, d_24, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_en_US, sid_DFTG2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

how thick is the tape( standard grip tape)

Asked by: mike37
Approximately .007" or .014" when folded in half.
Answered by: JimY
Date published: 2017-06-19

Iam not hip on mm so how wide is 48mm and 18mm

Asked by: chuck
48 mm is approximately 2" and 18 mm is approximately 3/4".
Answered by: JimY
Date published: 2017-06-19

Do you have tape that is activated by water?

Asked by: Royce
Yes the code is WST18 and WST10 for the Water Activated Tape. https://www.golfworks.com/water-activated-grip-tape/p/WST10/
Answered by: JimY
Date published: 2017-05-22

Is this the heavy tape activated by solvent, or water?

Asked by: Rob
DFTG2 is the solvent activated grip tape. WST18 is the Water Activated grip tape. https://www.golfworks.com/water-activated-grip-tape/p/WST10/
Answered by: JimY
Date published: 2017-05-08

Have you had any problems with the double sided tape? We are having trouble with the tape coming off the shaft, therefore letting the grip become loose

Asked by: Red1summ
Not that I have heard of. We use it for all of our regripping here at The GolfWorks as well and I have not heard of any problems. If it has been the whole roll of tape that has been giving you a problem I would suggest contacting Customer Service at 1-800-848-8358.
Answered by: JimY
Date published: 2017-04-14

Is this tape water activated?

Asked by: Ricky Shore
No the DFTG2 grip tape is not water activated. The WST18 and WST10 is the Water Activated grip tape. https://www.golfworks.com/water-activated-grip-tape/p/WST10/
Answered by: JimY
Date published: 2017-04-10

is it double sided

Asked by: jjohn
Yes, the DFTG2 Golfworks grip tape is double sided. Sticky on both sides.
Answered by: GW2002
Date published: 2017-03-15

what is the diff between the 48mm by 36yds and the 18mm by 36 yds grip ,tape?

Asked by: bob
The 48 mm and the 18 mm measurements are the width of the tape. Same tape, just different width sizes.
Answered by: GW2002
Date published: 2017-02-16
  • y_2017, m_6, d_25, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_39
  • loc_en_US, sid_DFTG2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks