The GolfWorks Maximum Strength High Impact Epoxy

The GolfWorks Maximum Strength High Impact Epoxy


Max Strength High Impact Epoxy 50 ml
$10.99
In Stock
Max Strength Tour Set Plus Epoxy 50ml
$11.99
In Stock
Max Strength Quick Set Epoxy 50 ml. Cartridge
$11.99
In Stock
Max Strength Quick Set Epoxy 8oz. (2 4oz bottles) -
$18.99
In Stock

The GolfWorks Maximum Strength High Impact Epoxy

NOTE: The GolfWorks Epoxy Cartridge Gun (#ESG2) equipped with a 2:1 Plunger (#VB1004) is required for proper dispensing. Epoxy Gun with 1:1 and 2:1 Plunger (#VB1005) also available.

Stronger Adhesion At Half The Cost! The new GolfWorks Maximum Strength High Impact and Tour Set Plus Epoxies have been formulated to match the peel and shear strength of premium 3MŪ epoxies only with more elastic qualities specifically needed for proper golf club head/shaft adhesion, at about half the cost. The Maximum Strength High Impact epoxy is formulated for the high volume clubmaker to gel in approximately 1 hour while the Maximum Strength Tour Set Plus epoxy with a gel time of 20-30 minutes is intended for smaller jobs and/or when you simply need to expedite the curing process. Both Maximum Strength epoxies feature a shear strength of 4500 psi and require a 2:1 mix ratio.

Not Found.

What is the difference between the Maximum Strength and Tour set epoxies?

Asked by: Deke
The main difference in the Max strength and the regular Tour set is the Shear Strength. Tour set has a shear strength of 3000 psi. The max strength has a shear strength of 4500 psi. Both are tested products and both shear strengths are more than enough for the golf club assembly application.
Answered by: GW2002
Date published: 2017-04-27

pls. let me know what epoxy good for lead counterweight on iron shaft?

Asked by: yasu
The VB1001 or EPX1 would both be good choices for these weights. https://www.golfworks.com/the-golfworks-high-strength-epoxy/p/EPX1/
Answered by: JimY
Date published: 2017-04-03

How many shafts can you do with one cartridge?

Asked by: SmallCap
You should be able to do 3 to 4 sets of clubs from one cartridge.
Answered by: JimY
Date published: 2017-03-01

My epoxy is slightly older than 6 months.  I mixed some and left it on the cardboard to test.  The bond is very good but after it cured when I tried to fold it it breaks like peanut brittle.  Is this normal for "good" epoxy or should there be some pliabil

Asked by: mick
The Max Strength Epoxy is a 2 to 1 mix so as long as your mix was 2 to 1 you should be fine. Epoxy will set up hard and brittle if to much hardner is used, which is the 1 part in this epoxy. The epoxy manufacture recommends a shelf life of 1 year for epoxy and as long as it is stored in a room like temperature.
Answered by: JimY
Date published: 2017-02-13

Does this come with the hand plunger?

Asked by: Brent
No the Maximum Strength Epoxy Cartridges do not come with a plunger. Because they are a 2 to 1 mix we feel the hand plungers do not work well enough to dispense the proper amounts of Part A & B.
Answered by: JimY
Date published: 2017-01-05

was wondering what epoxy you recommend when reshafting callaway razr x forged irons on project x steel shafts

Asked by: manny
Really any of the epoxies we sell could work just fine. Personally I always use the EPX epoxies and have for years and years. It is always my first recommendation. http://www.golfworks.com/the-golfworks-high-strength-epoxy/p/EPX1/
Answered by: JimY
Date published: 2016-12-23

hi what epoxy would you recommend for reshafting callaway razr x forged iron heads on project x steel shafts thanks .

Asked by: manny
Really any of the epoxies we sell could work just fine. Personally I always use the EPX epoxies and have for years and years. It is always my first recommendation. http://www.golfworks.com/the-golfworks-high-strength-epoxy/p/EPX1/
Answered by: JimY
Date published: 2016-12-23

Have a 1:1 plunger dispenser gun.  Which epoxy cartridge will fit it?

Asked by: Lew
The 1:1 Plunger will work with the following cartridges: VB1003: http://www.golfworks.com/the-golfworks-maximum-strength-quick-set-epoxy/p/VB1003/ GWSY: http://www.golfworks.com/the-golfworks-quick-set-epoxy/p/GWSY/ PSSE: http://www.golfworks.com/the-golfworks-tour-set-epoxy/p/PSSE/ TSPE: http://www.golfworks.com/the-golfworks-tour-set-plus-epoxy/p/TSPE/ (Black and Clear) EPX1: http://www.golfworks.com/the-golfworks-high-strength-epoxy/p/EPX1/
Answered by: JimY
Date published: 2016-11-07
  • y_2017, m_5, d_22, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_VB1001, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks