The GolfWorks Maximum Strength Quick Set Epoxy

The GolfWorks Maximum Strength Quick Set Epoxy

Max Strength Quick Set - 50ml Cartridge (1:1)
In Stock
Max Strength Quick Set - 8oz. Bottles (1:1)
In Stock
Max Strength Quick Set - 200ml Cartridge -
In Stock

The GolfWorks Maximum Strength Quick Set Epoxy

Recommended By The GolfWorks Staff!

The GolfWorks Maximum Strength Quick Set Epoxy is the strongest “5 minute” epoxy available, specifically formulated for metal wood and iron club assembly. Standard “5 minute” epoxies are only recommended for putter assembly and temporary emergency repairs. With a full cure lap shear strength of 2900 psi and a usable cure time of 15-30 minutes, the Maximum Strength Quick Set Epoxy eliminates the need for unreliable one part cyanoacrylate adhesives and is much more reliable than standard “5 minute” shafting epoxies with average lap shear strengths of 1500 psi. Maximum Strength Quick Set is black in color with a mix ratio of 1:1. Thumb plunger for dispersion is included.

Available in 50ml cartridges, 4 oz (2) bottles and 200ml cartridges. Note the 200ml cartridges require VB1028 Epoxy Gun

The GolfWorks Maximum Strength Quick Set Epoxy is rated 4.4 out of 5 by 7.
Rated 5 out of 5 by from Great For Adjustable Hosel Clubs I've gone through 3 tubes of this over the past 3 years and have not had 1 single failure. I use this specifically for all my TaylorMade Loft Sleeve Shafts adapters. For Drivers/Fairways/Hybrids with Graphite I use Quick Set 2900psi For Iron/Wedge steel shaft builds I go with the High Impact 4500psi Both Golfworks Products are fantastic!!
Date published: 2015-08-07
Rated 5 out of 5 by from Excellent Epoxy For all those who use epoxy of any kind failures will occur if you don't clean your components of contaminants, old epoxy, oil, grease, dirt, etc. I use plain old rubbing alcohol on Q-tips. Three or Four Q-tips (held together tightly and at even length) soaked in Alcohol per hosel. One end for cleaning, the other end for drying. I do this twice / 2 times per hosel. Get things nice and clean inside. I've done this for over 30 years and have NEVER had a problem. The products work fine. Those who use the products need some help and training, from time to time, to ensure success. Hope this helps.
Date published: 2018-01-03
Rated 5 out of 5 by from Works fast I bought this to experiment with different shafts, easy to use, cures quick and strong.
Date published: 2016-09-15
Rated 1 out of 5 by from Failure inevitable Once again this epoxy has failed. The shaft and adapter where prepared by the book. I gave this epoxy 24 hours to cure in a 70 degree room. The shaft completely spun out of the adapter with the first ball hit the same thing happened last year same product same adapter. Do not buy this product it is total garbage.
Date published: 2016-06-10
Rated 5 out of 5 by from the I like the quick set epoxy. Will wait for customer feedback before I rate it. Thanks
Date published: 2017-05-23
Rated 5 out of 5 by from Great stuff Great service and fast response, love the quick set epoxy
Date published: 2016-08-07
Rated 5 out of 5 by from Works Great! This is a great epoxy for attaching hosel adapters.
Date published: 2016-04-25
  • y_2018, m_1, d_18, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_VB1003, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I i,m trying many times to buy epoxy as i have done in the past but cannot place the order please advise on why it drops off the screen when i go to select the item. regards Robert

Asked by: Robert
Donna Ours our International Trade Accounts Manager told me that she had just emailed this message to you regarding ordering this product. Thank you for the inquiry. I see you have been placing orders through UPS I PARCEL. They have removed all items that they feel cannot be shipped due to hazardous material. We have been working with them on this matter and some items have been restored but not all of them. This is for all International customers placing orders through UPS I PARCEL. If the items you want are not available, please place your order with Golfworks by selecting the US flag and proceed with the order. Shipping will cost more but delivery is faster.
Answered by: JimY
Date published: 2017-11-15

At what temp does set epoxy melt?

Asked by: JHP
It breaks down or melts at approximately 220 degrees.
Answered by: JimY
Date published: 2017-10-30

Hi It looks like you are out of stock of epoxy when are you likely to have stock please. also 1 x 30 ferrule turning belts item GW2005

Asked by: Robert
We have plenty of the VB1003 Epoxy in stock. We also have plenty of stock of the 1" x 30" belts. It is likely these items are not set up on the Australian site. You will need to order from GolfWorks USA or contact our International Trade Accounts Manager, Donna Ours, at and she can help you with your order.
Answered by: JimY
Date published: 2017-10-12

"Golfworks" cat. 2017 Edition 2, page 132 shows that "Maximum Strength Quick Set Epoxy" VB1003 (50 ml cartridge) is 1:1 mix, 30 min. set, 24 hr cure." Is this correct? The Pt. A, 50 ml I purch. Dec. 2015, is "grainy" & requires some force to dispense.

Asked by: Les
The Max Strength Quick Set (VB1003) sets in 5 minutes and a usable cure time of 15 to 30 minutes. Shear strength is 2900 psi. The epoxy manufacture recommend a shelf life of 1 year for epoxy so it could be a good idea to replace your 2015 epoxy.
Answered by: JimY
Date published: 2017-08-21

Is this epoxy good for steel and graphite shafts?

Asked by: irvi
Yes the VB1003 epoxy and all of our shafting epoxies will work well with both steel and graphite shafts.
Answered by: JimY
Date published: 2017-05-22

There are no instructions on how this mixer works. Are there instructions anywhere?

Asked by: Birdawg
We recommend having the Epoxy Cartridge Gun (VB1005) when working with these 2:1 mix cartridges. The plunger on the Cartridge Gun will force out the right amount epoxy from each tube so that you will have the correct 2:1 mix. The 2:1 mix is 2 parts hardner and 1 part base. Without the Cartridge Gun you have to be able to push the plungers in the tubes with equal pressure so that you have a 2:1 mix. I would recommend dispensing the epoxy on to a piece of cardboard so that you can see if you have a 2:1 ratio.
Answered by: JimY
Date published: 2017-06-04

I purchased this to repair a wedge and the plunger broke in my hand.  How much force do you need to make this work?

Asked by: DWY
If the epoxy is kept at room temperature, the force needed to dispense the epoxy should not be enough to break the the plunger. If the epoxy had been in a cooler or cold environment, it would be more difficult to use the plunger. It really is meant to be dispensed at a normal room temperature, approximately 72 degrees.
Answered by: GW2002
Date published: 2016-03-18

What is the safety information for this product. (For both exposure: MSDS, and disposal: Hazardous Waste designation)?

Asked by: Saftey Commisioner
Email this question to our Customer Service department at and they will email the SDS (Safety Data Sheets) as they are now called, for this product.
Answered by: JimY
Date published: 2016-03-09
  • y_2018, m_1, d_18, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_VB1003, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks