The GolfWorks Quick Shaft Clamp

The GolfWorks Quick Shaft Clamp


The GolfWorks Quick Shaft Clamp
$66.99
In Stock

The GolfWorks Quick Shaft Clamp

Safely clamps any golf shaft for gripping. Thumb knob quickly and easily adjusts the clamp pressure for use with light weight graphite shafts. Comes with a bench mount bracket that can be removed, rotated 90 degrees and reinstalled for use in a vise.

The GolfWorks Quick Shaft Clamp is rated 4.9 out of 5 by 32.
Rated 4 out of 5 by from Good tool to have even if you only regrip once a year. Impress your friends. Practice on their clubs!
Date published: 2017-02-18
Rated 5 out of 5 by from ease of use easy to use. good and sturdy construction. will last a lifetime.
Date published: 2016-02-08
Rated 5 out of 5 by from easy to mount and works great I decided to get into the habit of regripping all clubs on a regular basis. I also want to get involved in repairing and possibly putting together component parts. I mounted the clamp to a small board that I can secure to my workbench or move to other areas as needed. The clamp works great. It is easy to set up, holds the clubs firmly without fear of damage. I highly recommend this
Date published: 2017-01-05
Rated 5 out of 5 by from GolfWorks Quick Shaft Clamp I bought this clamp a month ago, and it makes re-gripping so much easier then when I had only the rubber vise clamp. They both work, and get the job done, but the quick clamp cuts the time by probably ten times, and I'm no longer worried about setting the vise too tight and damaging the shaft.
Date published: 2016-10-31
Rated 5 out of 5 by from A great convenience tool This shaft clamp cuts down significantly the time required to regrip as you avoid having to reclamp each club manually in a vise. The shaft clamp is easily adjustable to fit any size shaft. A must have if you regrip a lot.
Date published: 2016-11-08
Rated 5 out of 5 by from Fantastic I purchased this tool about a month ago and couldnt be more happy with it. Wonderful design, easy to use.
Date published: 2015-07-07
Rated 5 out of 5 by from great quality If you like to work on your golf clubs then this is the vice you want. Nice and small but very well made
Date published: 2016-01-25
Rated 5 out of 5 by from Easy to use. Replaces an older clam I have had about 10 years. Easy to use and very stable.
Date published: 2015-12-15
  • y_2017, m_2, d_20, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_32
  • loc_en_US, sid_GW0051, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

can you tell me the width from place screw to place screw on the removable rubber pad? is it 2 and 3/8" ? thank you

Asked by: nobogeys
Yes it is 2 3/8" from center to center on the screw holes.
Answered by: JimY
Date published: 2017-01-26

how can I purchase replacement rubber clamps for this unit? thank you

Asked by: nobogeys
Yes we do have replacement rubber clamps. The code is GW0051RP. These are not listed on the web site so you will need to contact Customer Service at 1-800-848-8358.
Answered by: JimY
Date published: 2017-01-26

How do you know how much pressure to put on the steel shafts to not damage them?

Asked by: Lillie
You want just enough pressure to hold the shaft securely so that it will stay in place when you are installing grips. You want to feel some clamping pressure but you do not want to have to force the clamp to hold the shaft.
Answered by: JimY
Date published: 2017-01-04

Does the golf grip solvent catch kit you sell attach to this?

Asked by: rooster
No the grip solvent catch kit does not mount to this unit.
Answered by: JimY
Date published: 2016-12-08

What is the minimal size vise that this can be used with?

Asked by: rooster
You need a vise with at least a 1.75" jaw opening to be able to mount this unit in a vise.
Answered by: JimY
Date published: 2016-12-08

Is this the same clamp that is included in The Golfworks Gripping Station?

Asked by: DTRAMM
Yes this is the same clamp that comes on the Gripping Stations.
Answered by: JimY
Date published: 2016-08-08

Hi.Would you be able to send this item to Melbourne-Australia?And if you could what would be the price for postage?Thank you

Asked by: yildirim
Yes we can ship to Meloburne Australia. For cost and pricing you will need to contact our International Trade Accounts Manage Donna Ours at dours@golfworks.com and she will be able to help you.
Answered by: JimY
Date published: 2016-06-23

What happened to the aluminum channel on the bottom for clamping into the vice?  I thought that was on the clamp when I ordered it, but the one I received doesn't have it.

Asked by: Haubs
The aluminum channel has been replaced by the by the universal bracket. This bracket can be mounted to a bench as it. If you remove the mounting bracket, rotate it 180 degrees and reinstall it will fit into a vise with not problem.
Answered by: Admin
Date published: 2016-04-27
  • y_2017, m_2, d_20, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_GW0051, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks