The GolfWorks Quick Shaft Clamp

The GolfWorks Quick Shaft Clamp

The GolfWorks Quick Shaft Clamp

The GolfWorks Quick Shaft Clamp

Safely clamps any golf shaft for gripping. Thumb knob quickly and easily adjusts the clamp pressure for use with light weight graphite shafts. Comes with a bench mount bracket that can be removed, rotated 90 degrees and reinstalled for use in a vise.

The GolfWorks Quick Shaft Clamp is rated 4.9 out of 5 by 35.
Rated 5 out of 5 by from ease of use easy to use. good and sturdy construction. will last a lifetime.
Date published: 2016-02-08
Rated 5 out of 5 by from easy to mount and works great I decided to get into the habit of regripping all clubs on a regular basis. I also want to get involved in repairing and possibly putting together component parts. I mounted the clamp to a small board that I can secure to my workbench or move to other areas as needed. The clamp works great. It is easy to set up, holds the clubs firmly without fear of damage. I highly recommend this
Date published: 2017-01-05
Rated 5 out of 5 by from GolfWorks Quick Shaft Clamp I bought this clamp a month ago, and it makes re-gripping so much easier then when I had only the rubber vise clamp. They both work, and get the job done, but the quick clamp cuts the time by probably ten times, and I'm no longer worried about setting the vise too tight and damaging the shaft.
Date published: 2016-10-31
Rated 5 out of 5 by from A great convenience tool This shaft clamp cuts down significantly the time required to regrip as you avoid having to reclamp each club manually in a vise. The shaft clamp is easily adjustable to fit any size shaft. A must have if you regrip a lot.
Date published: 2016-11-08
Rated 5 out of 5 by from Fantastic I purchased this tool about a month ago and couldnt be more happy with it. Wonderful design, easy to use.
Date published: 2015-07-07
Rated 5 out of 5 by from great quality If you like to work on your golf clubs then this is the vice you want. Nice and small but very well made
Date published: 2016-01-25
Rated 5 out of 5 by from Easy to use. Replaces an older clam I have had about 10 years. Easy to use and very stable.
Date published: 2015-12-15
Rated 5 out of 5 by from easy to use after using this shaft clamp I wondered why I hadn't bought one a long time ago.this clamp sure is a lot easier than a vice with all that turning & turning .if you are going to work on grips & shafts this should be the first tool you buy and Golfworks is the greatest company I have ever bought from .they always have great deals and really fast shipping
Date published: 2016-08-29
  • y_2017, m_3, d_27, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_35
  • loc_en_US, sid_GW0051, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

what is the cost of shipping the golf works quick shaft clamp to reading in the uk

Asked by: mickey
If you will contact our international representatives at with specific location information, they can give you an accurate shipping rate to your location, along with shipping options that are available.
Answered by: GW2002
Date published: 2017-03-23

How much longer before you expect backorders to be filled?

Asked by: Mike
Right now we are showing the end of April or first of May before these are due in.
Answered by: JimY
Date published: 2017-03-20

How soon will the GolfWorks Quick Shaft Clamp be back in stock and ready to ship if it is currently backordered?

Asked by: Nick
We are showing right at the end of April or first of May before we will have these in stock.
Answered by: JimY
Date published: 2017-03-10

Would I be able to use this clamp at the very end of an ungripped shaft?

Asked by: Martin Breedlove
If you clamp at the butt end (grip end) of the shaft be very careful with your clamping pressure with graphite shafts. You could crack or break the shaft. With steel shafts you still need to be careful but it should not be a problem. This clamp does not work well for clamping the tip end of the shaft simply because it was not designed for that purpose.
Answered by: JimY
Date published: 2017-02-21

I just purchased this and am confused by the clear rubber tubes over the springs. Are these to be removed as it doesn't allow the full vice pressure against the shaft. Thanks.

Asked by: Todd
You can remove them or you could cut them a little shorter. I believe there purpose is to cover the springs and keep grip solvent from getting on the springs and gumming them up.
Answered by: JimY
Date published: 2017-02-21

can you tell me the width from place screw to place screw on the removable rubber pad? is it 2 and 3/8" ? thank you

Asked by: nobogeys
Yes it is 2 3/8" from center to center on the screw holes.
Answered by: JimY
Date published: 2017-01-26

how can I purchase replacement rubber clamps for this unit? thank you

Asked by: nobogeys
Yes we do have replacement rubber clamps. The code is GW0051RP. These are not listed on the web site so you will need to contact Customer Service at 1-800-848-8358.
Answered by: JimY
Date published: 2017-01-26

How do you know how much pressure to put on the steel shafts to not damage them?

Asked by: Lillie
You want just enough pressure to hold the shaft securely so that it will stay in place when you are installing grips. You want to feel some clamping pressure but you do not want to have to force the clamp to hold the shaft.
Answered by: JimY
Date published: 2017-01-04
  • y_2017, m_3, d_26, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_GW0051, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks