The GolfWorks Speed Clamp

The GolfWorks Speed Clamp


Speed Clamp -
$109.99
In Stock

The GolfWorks Speed Clamp

The GolfWorks Speed Clamp’s unique clamping fixture instantly self adjust to any shaft diameter size. Once the clamp comes in contact with the golf shaft, the gears lock into place creating a slip proof hold on any type of golf shaft using very light clamping pressure to safely hold even the lightest of graphite golf shaft designs. The Speed Clamp is CNC milled to exact tolerances and comes complete with hardware for bench mounting.
The GolfWorks Speed Clamp is rated 4.0 out of 5 by 2.
Rated 5 out of 5 by from 5 Stars to the Speed Clamp! I got this clamp with the Golfworks Gripping Station. It performs EXACTLY as touted. Extremely fast, with absolutely zero chance of crushing a shaft when used according to instructions.
Date published: 2013-10-21
Rated 3 out of 5 by from Works well, less material Clamp works well, has good adjustment and holding power for light/meduim work. The clamp is not the best quality for the price. The clamp is pot metal and recycled rubber for the jaws. Would buy a different model with steel and premium rubber due to the pulling when regripping.
Date published: 2016-05-21
  • y_2017, m_2, d_20, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_GW0111, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

If they clamps on the inside have fallen off how do repair this?

Asked by: John McLaughlin
I would first clean any adhesive or glue from the back of the pads and the metal clamps. I would use Contact Cement to glue these back in place. Just follow the instructions for proper use with Contact Cement and it should work very well.
Answered by: JimY
Date published: 2017-01-24

Will the speed clamp replace my vice when changing grips?

Asked by: McGolph
It can replace your vise. It can be mounted right to a bench or it could be clamped in a vise and used as well.
Answered by: JimY
Date published: 2016-10-03

When the club in inserted in the clamp, what is height in inches that the club is above the bench? Need to know if there is enough room for a drip pan.

Asked by: Scott
With a shaft in the shaft clamp from the bottom edge of the shaft to the base of the clamp you have 1" clearance.
Answered by: JimY
Date published: 2016-08-03

How far apart are the mounting holes? Thanks

Asked by: Taylor
The mounting holes are 2" apart measured from center to center of each hole.
Answered by: JimY
Date published: 2016-05-16

Can replacement pads be ordered for this clamp? Thanks.

Asked by: golf doctor
Yes we do have replacement pads for the Speed Clamp. The order code is GW0111RP. You will probably need to call this order into Customer Service at 1-800-848-8358.
Answered by: JimY
Date published: 2015-07-13

are these still on back order? If so when will they back in stock?

Asked by: cgrieder
Yes they are still on backorder. Right now it shows they should be here right at the end of May.
Answered by: JimY
Date published: 2015-05-18

how soon do you expect this item to arrive?  its the Speed Clamp

Asked by: patrickc
Expected delivery date on the GW0111 Speed Clamp is February 6th, 2015.
Answered by: GW2002
Date published: 2015-01-27

What is overall length of clamping surface?

Asked by: Donessx
The clamping length is 3".
Answered by: JimY
Date published: 2015-01-22
  • y_2017, m_2, d_19, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_GW0111, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks