The GolfWorks Tour Set Plus Epoxy

The GolfWorks Tour Set Plus Epoxy


Tour Set Epoxy Plus Two 4 oz. Bottles - Black
$17.49
In Stock

The GolfWorks Tour Set Plus Epoxy

All the convenience and bonding strength of the standard Tour Set, but with a gel time of 25-35 minutes, allowing for more clubs to be done with one mix. Cures to playing strength in 60 to 90 minutes, depending on temperature.

The GolfWorks Tour Set Plus Epoxy is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from Strong First time ever changing shafts. This epoxy gives plenty of working time .
Date published: 2017-09-26
Rated 5 out of 5 by from the best and only I have played overlength for 30 years. I use to take my clubs to club maker/repair guys to do the good job, but often the extensions would fail. It was becoming a real pain. A good maker/repair guy told me I should stir the mix with a little more hardner and for at least 10 minutes before I applied it. Done. I've never had a failure since.
Date published: 2017-09-10
Rated 5 out of 5 by from Golf Clubmaker I as a clubmaker always purchase my golf supplies from Golfworks who has the best products for clubmaking and always deliver promptly.Thank you for your service. Rocky
Date published: 2015-06-29
Rated 5 out of 5 by from Great Product Been using Tour set epoxy black for many years.Gel time is good(20 min) and hardening time excellent(45 MIN).
Date published: 2015-08-17
  • y_2017, m_11, d_17, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TSP4, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Was going to use one of the epoxy parts to add to a fairway wood to add a little weight in the head as I am going to re-shaft at a shorter length. Does it matter which which one to use? Thanks.

Asked by: Lee
You would use the Part B but you would be better to use the Head Tacking Adhesive (CLHT or GW0035) http://www.golfworks.com/search.asp?ss=clht
Answered by: JimY
Date published: 2016-10-13

What is shear strength - the clear version says 3000 - the black says 1100 (2 years ago).

Asked by: clafoone
The shear strength for the clear (TSP4C) is 1500 psi and for the Black (TSP4) it is 3000 psi.
Answered by: JimY
Date published: 2016-06-21

breakdown temp.?

Asked by: rexini
350 degrees F.
Answered by: GW2002
Date published: 2015-06-11

temp. breakpont wen removing shaft?

Asked by: rexgolf
Generally, the break down point is between 200 and 250 degrees F. Longer setting epoxy can be closer to the 250, while shorter setting can be closer to 200.
Answered by: GW2002
Date published: 2015-05-26

What is the difference in the lap shear strength of this compared to the regular 24 hour cure type? I have used this exclusively this past year with no failures yet, but I keep hearing on the forums to always use the 24 hour variety.

Asked by: mikeweird
All of the GolfWorks epoxies require a 24 hour cure time. Each epoxy has a specific gel time, usable cure time and shear strength. For example: The Tour Set Plus epoxy and the Tour Set epoxy both have a shear strength of 3000 psi but the Tour Set epoxy gels faster. The thing that makes our epoxies better than other brands, especially non-golf specific epoxies, is that we have the epoxies formulated to be slightly flexible specifically for golf club adhesion. We do not use "stock" formula epoxies. None of The GolfWorks epoxies will cure brittle and all require 350 degrees of heat to break down. FYI, our GolfWorks Maximum Strength Quick Set will set in less than 10 minutes, be hittable in 15 to 30 minutes (depending on temperature) but does not fully cure for 24 hours. The MS Quick Set is flexible and has a shear strength of 2900 psi which is much stronger than most most high strength 24 hour epoxies sold by other golf supply companies.
Answered by: Admin
Date published: 2015-02-04

What is the sheer strength of this product?

Asked by: Sevastra27
The sheer strength of the TSP4 is 1100 psi.
Answered by: GW2002
Date published: 2014-10-10

Why should I write a review if I did NOT make a purchase from you?

Asked by: ZERO
  • y_2017, m_11, d_17, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_TSP4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks