The GolfWorks Tour Set Plus Epoxy

The GolfWorks Tour Set Plus Epoxy


Tour Set Plus Epoxy - 50 ml. Cartridge - Black
$10.49
In Stock
Tour Set Plus Epoxy - 50 ml. Cartridge - Clear
$10.49
In Stock

The GolfWorks Tour Set Plus Epoxy

Tour Set Plus offers all the convenience and long lasting bond of standard Tour Set, but with a gel time of just 25-35 minutes for added convenience. Cures to playing strength in 60 to 90 minutes, depending on temperature.

NOTE: 1.5 oz. (50 ml.) cartridge. Tour Set Plus is Black in color.

The GolfWorks Tour Set Plus Epoxy is rated 4.0 out of 5 by 4.
Rated 1 out of 5 by from Doesn't set up This is the third time I've written a review of this product and it never gets posted. First time I tried it, it didn't set after 5 hrs. of waiting. So I pulled it apart and cleaned everything really well and tried again. I made sure to mix it thoroughly and tried again. After waiting over night, it still wasn't set up. So I ended up having to take it to a local shop and pay them to do it.
Date published: 2016-04-30
Rated 5 out of 5 by from Best overall epoxy The Tour set epoxy has excellent sheer strength and a workable set time. There is less waste than some of the "quick set" epoxies (i.e. 5/15) I have tried. I have never had the head or ferrule seperate, using this Golfworks product.
Date published: 2015-06-23
Rated 5 out of 5 by from No problems Bought the epoxy for shaft replacement in my driver. I have had no problems with the driver since shaft was replaced. Would recommend this epoxy.
Date published: 2015-10-20
Rated 5 out of 5 by from Tour set epoxy This is not about the product, my problem is you send me a special on the product I just bought, this has happened 3x
Date published: 2016-10-13
  • y_2017, m_5, d_19, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TSPE, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Is a plunger required for this product?

Asked by: John
The TSPE comes with a hand plunger you do not need not need a cartridge gun.
Answered by: JimY
Date published: 2017-02-09

I have one drive head to reattach to the shaft. Is this all I need? No extra epoxy gun or plunger?

Asked by: Bill
Yes the TSPE epxoy cartridge will be all you need. It comes with a hand plunger. You could also use the epoxy packet lie SEPX for a single club. http://www.golfworks.com/high-strength-epoxy-single-packet/p/SEPX/
Answered by: JimY
Date published: 2016-11-07

What is the recommended amount of this epoxy to use for reshafting 10-15 clubs?

Asked by: goldenarm7
The cartridge is more then enough epoxy to reshaft 10 to 15 clubs.
Answered by: JimY
Date published: 2016-07-07

does the top turn or come off

Asked by: Ron ed
To remove the top you rotate it and pull it off.
Answered by: JimY
Date published: 2016-01-18

Shear strength? Break down temperature?

Asked by: Rozz
Shear strength is 1100 psi and the breakdown temperature is approximately 220 degrees.
Answered by: JimY
Date published: 2014-10-21
  • y_2017, m_5, d_19, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_TSPE, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks