The GolfWorks V-Line SwingWeight Scale

The GolfWorks V-Line SwingWeight Scale

V-Line Golf Club SwingWeight Scale -
In Stock

The GolfWorks V-Line SwingWeight Scale

An economical swingweight scale that gives industry standard readings (c8, d2, etc…). Large and easy-to-read scale for swingweight and total club weight measurements. Cradle allows quick weighing of components in both grams and ounces. Great for the hobbyist or occasional user. Measures: . Total weight . Swingweight at 14” fulcrum point . Individual component weights

The GolfWorks V-Line SwingWeight Scale is rated 3.5 out of 5 by 2.
Rated 4 out of 5 by from great for us amateurs I have been wanting a swingweight machine for quite awhile and caught a sale at the local GOLF GALAXY (the store carries MALTBY club supplies). Great unit, easy to use and store; consistent and accurate with a higher quality machine that I once had access to a few years back. HIGHLY recommend.
Date published: 2008-01-04
Rated 3 out of 5 by from works works fine but i really don't like the set up. there is no where to add the grip tape and grip to get an accurate weight
Date published: 2016-10-11
  • y_2017, m_10, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_NESC, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have an older model of the V-line that I would like to calibrate. I have used it for years, but I quit using it when I saw significant differences in accuracy when compared to the scale at the PGA Superstore. Any help will be appreciated.

Asked by: John
The only, and best way for us to calibrate would be for you to send it to us and let us calibrate it here at the factory.
Answered by: GW2002
Date published: 2017-06-16

Does this scale show the letters and numbers (ex. E4) on the scale? Thank you

Asked by: sshephard
Yes this scale does show the swingweight reading such as E4 on the scale.
Answered by: JimY
Date published: 2017-05-08

Checked my scale calibration and the weight scale reads 1 oz too high. I see mention of a back weight. What is the back weight for? I don't see on mine? Where does it go?

Asked by: Darrell
The back weight is inside a plastic end cap that would be inserted in the main beam of the scale on the left side of the scale as you face it. The end cap and the weight can be ordered, but I would encourage you to send the scale to us to insert the weight and calibrate the scale.
Answered by: GW2002
Date published: 2017-04-28

Do I have to buy anything else like something to secure the grip?

Asked by: Billy
The NESC is designed to measure the swing weight of complete, gripped golf clubs. ou do not need any other attachment to measure complete club swing weight with this scale.
Answered by: GW2002
Date published: 2017-03-23

How accurate is this swingweight scale? Has anyone tested accuracy against a known club swingweight?

Asked by: Three
We test this against our Maltby Golf Club Scale (SWRM) and it is every bit as accurate. We build both of these scales here at The GolfWorks and they are calibrated to the same tolerances.
Answered by: JimY
Date published: 2016-11-21

I purchased the V-Line swingweight scale a couple of years ago and cannot find the weight that slides to calculate the swingweight. Can I buy that part from GolfWorks?

Asked by: Nick
The ordering code for the sliding weight is NESCP01.
Answered by: JimY
Date published: 2017-06-02

How heavy is the counter weight on the swing weight scale?

Asked by: Jap
The sliding weight weights 396 grams. We do sell a replacement if you need one. The code is NESCP01.
Answered by: JimY
Date published: 2016-06-24

I found the "Golfworks V-Line swing weight scale" but I see it is missing some parts. I have the bar and the sliding bar but the rest I missing. How much would it cost for those parts and a manuel ?

Asked by: Susan
It sounds like your are missing the base. In order for use to replace this piece properly so that the scale would work properly you would need you to send us the pieces that you have so that we could match it up correctly and calibrate it. In all honesty by the time you go through sending it back and with the the cost of making the new piece you could probably purchase a new one.
Answered by: JimY
Date published: 2016-05-10
  • y_2017, m_10, d_21, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_NESC, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks