The Ultimate Grip Installer Tool

The Ultimate Grip Installer Tool

Ultimate Grip Installer Tool
In Stock

The Ultimate Grip Installer Tool

Essential for installation on big butt shafts as well as conventional shafts, making grip installation much quicker. Minimizes splitting of grips, and speeds up installation!

The Ultimate Grip Installer Tool is rated 4.0 out of 5 by 21.
Rated 1 out of 5 by from Not good Did not work well with the lamkin grips that I was using. Used plenty of solvent and have put on thousands of grips before, this is a cheap product that broke and did not work. Embarrassing.
Date published: 2017-10-17
Rated 5 out of 5 by from Awesome tool for changing grips. I have used this device and it makes changing grips so easy. I even gave one to my nephew.
Date published: 2015-05-27
Rated 5 out of 5 by from Ultimate Grip Installer Tool This is my 3rd tool, broke the 1st one-my fault, lost the 2nd-my fault, See a pattern developing here? Seriously I tried to make one, and finally bought my third. It does an excellent job. Hint: Use heat gun to preheat grip a little makes an easier job.
Date published: 2016-08-07
Rated 5 out of 5 by from Mike B. golf review I bought this little plastic tool to help me re-grip my golf clubs and it works very well. It allows the club to slip onto the shaft very easily. No hard pushing or vise needed. It slides off and your ready for the next club to re-drip. A snap.
Date published: 2015-11-26
Rated 1 out of 5 by from The ultimate grip installer tool. Garbage!! Tried this tool on 3 grips and it split and ruined everyone of them.If i could put no stars i would. If this company is a good one they will refund my money.
Date published: 2015-01-12
Rated 2 out of 5 by from Old one was better The smaller grip starter that you not longer sell was much better. Everything about this one is worse than the old one. Please bring back the old one.
Date published: 2016-09-12
Rated 5 out of 5 by from works perfect Makes sliding grips on a breeze. Would highly recommend.
Date published: 2015-03-17
Rated 5 out of 5 by from Works as claimed I used this on a bubble shaft and the recommended grip for a bubble shaft slide right on. Worked great. I'm sure that it would help any grip on any shaft slip on easier.
Date published: 2016-12-14
  • y_2017, m_10, d_18, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_en_US, sid_BBGIT, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

exactly how does this work!!

Asked by: trim
Here is the link from our web site with the instructions for the BBGIT.
Answered by: JimY
Date published: 2017-06-07

How does it work? I can see how do you remove it once the grip is installed?

Asked by: DHC
The BBGIT has a slot cut into it so that it will slide over the shaft to be removed. Here is the link for the instructions.
Answered by: JimY
Date published: 2016-11-21

how to use this tool for replacin old grips

Asked by: harv
Here is the link for the instructions for the BBGIT.
Answered by: JimY
Date published: 2016-09-19

whats the diameter of the big end of the tool? im trying to find one to install goldwinn avdp slippon grips and the butt end is about 1 inch is this tool big enough i already have a standard big butt grip installer but its not big enough

Asked by: shanky
Yes the BBGIT will work with the Goldwin big butt shafts.
Answered by: JimY
Date published: 2016-03-31

is this plastic

Asked by: buck12
Yes this is plastic.
Answered by: JimY
Date published: 2015-11-18

can this be use for bubble shift grips?

Asked by: gcsaunders
Yes this was actually originally designed to be used with the Bubble Grips. It works well but there will still be some work to install non bubble grips over bubble shafts.
Answered by: JimY
Date published: 2015-06-02

Hi, Would you ship to the Netherlands? What would be the rate when I order 2 pieces? Thanks. Kind regards, Ron

Asked by: Foxy Golfclub Repair
I am told that it would be approximately $10.00 to ship these via mail to the Netherlands. That would be for 2 BBGIT's.
Answered by: JimY
Date published: 2014-12-15

how is grip installer tool used?

Asked by: joebov
The instructions for use can be found here:
Answered by: The GolfWorks
Date published: 2015-12-08
  • y_2017, m_10, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_BBGIT, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks