Tour Tech Filament Wound Graphite Fairway Shafts

Tour Tech Filament Wound Graphite Fairway Shafts

A Flex 45" - .335 tip (61g) 2B2M
In Stock
R Flex 45" - .335 tip (61g) 3B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Tour Tech Filament Wound Graphite Fairway Shafts

  • Lightweight, filament wound shafts specifically designed for fairway woods - not a wood shaft simply cut to 45.
  • The distribution of weight, stiffness and torque, especially the lower 20, has been designed to easily produce a mid-high launch off grass.
  • 100% inspected to insure 360* consistency.

Trimming Instructions


Tour Tech Filament Wound Graphite Fairway Shafts is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Suprised good I bought this items few weeks ago. Suppose to be for the fairway wood but I put into Driver. Multi adjust driver and shaft into horsel adapter, I don't see any different from using different setting. Seems to me, it is good as 200 shaft. I will buy this brand again as long as available.
Date published: 2015-08-17
Rated 5 out of 5 by from Great golf shaft This is a great golf shaft for 18 dollars!!!!!!!!!
Date published: 2014-09-20
  • y_2017, m_5, d_23, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_GT0002, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I bought a KE 4 3w head that weighs 220g. With this tour tech shaft should I be trimming it as a 3w or a 5w? This 3w head is heavier than most 3 woods. 

Asked by: pwg
For me if the head weight weights 220 grams then I would follow the tip trimming for the 5 wood. Generally a traditional 3 wood was in the 210 gram head weight range.
Answered by: JimY
Date published: 2017-04-10

I'm after a new shaft for my maxfli md 3 wood, 5 wood and hybrid. The current shafts are really flexy and I loose the ball to the right. Would these be a suitable replacement? I don't want to spend too much as the clubs are cheap.

Asked by: JamesG
The fairway wood shafts will fit the 3 and 5 woods but not the hybrid. You would need the GT0003 TourTech Hybrid shaft for the hybrid. As long as you get the correct flex they could work well.
Answered by: JimY
Date published: 2017-02-08

What's the RAW CPM of the A flex and R flex. 

Asked by: Zul Mokti
Our test data shows 233 cpm's for the A and 238 cpm's for the R flex.
Answered by: JimY
Date published: 2017-01-11

What is the trim instructions for a fairway 3 wood with senior flex? Thanks.

Asked by: BeachBill
With this Fairway Wood shaft the recommended tip trimming for the 3 wood is 0". Just install and butt cut to your finished length. You would follow trim code W19 at this link. You will need to scroll down to the bottom of the page.
Answered by: JimY
Date published: 2016-07-21

Is a 95 gram steel shaft too heavy for me?

Asked by: NickinPS
A 95 gram steel shaft is considered a lightweight steel shaft. There is no way to know if the 95 gram steel shaft is too heavy for you without going thrugh the proper shaft fitting procedures.
Answered by: GW2002
Date published: 2015-06-18

Will this shaft fit into a 2007 taylormade TP burner 3 wood. If so can I get it a half inch longer than standard length 

Asked by: Pickleman
  • y_2017, m_5, d_23, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_GT0002, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks