True Temper Belly & Long putter shafts

True Temper Belly & Long putter shafts


Stepless Ski Pole 53" - 370 tip (163g)
$16.99
In Stock
Single Bend Ski Pole 53" - 370 tip (163g)
$16.99
In Stock
Double Bend Ski Pole 53" - 370 tip (163g)
$16.99
In Stock
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Belly & Long putter shafts

True Temper Long & Belly steel putter shafts are specifically designed for over length putters.

Features:
  • .370" tip diameter
  • Available in stepped, stepless, single bend and double bend profiles
  • Due to the extremely long parallel butt section the Ski Pole can also be cut to shorter lengths for belly putters

True Temper Belly & Long putter shafts is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from trimming belly length your trimming instructions do not include belly putter length.
Date published: 2011-11-12
Rated 5 out of 5 by from trimming belly length your trimming instructions do not include belly putter length.
Date published: 2011-11-12
  • y_2017, m_9, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_SKP, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

If I send in 3 putters, can you re grip and  re shaft them with long (48)  shafts??

Asked by: Cyrus
That depends on which manufacture and model putters they are and if we have long putter shafts that will fit them. If you can tell me the manufacture and model of putters you have I should be able to tell you if we can reshaft them for you with long shafts.
Answered by: JimY
Date published: 2017-07-10

I have a Daddy Longs Leg 2.0 / 35 inch. I want to convert it to a 50 inch long putter. What shaft should I get & should weight be added to the putter?

Asked by: BigV
I believe the shaft on the Daddy Long Legs 2.0 putter installs over a post. If that is true we do not have a putter shaft that will fit. Our long double bend putter shafts will not install over the post because of the wall thickness at the tip end of the shaft.
Answered by: JimY
Date published: 2017-05-04

I'm looking for a replacement shaft for a Scotty Cameron Kombi Mid putter. Need Long shaft

Asked by: Ken
The Kombi Mid putter requires a long shaft with a special bend that Titleist doesn't make available to the aftermarket. I would recommend contacting Titleist.
Answered by: Admin
Date published: 2017-05-03

I have a White Hot odyssey centre shaft putter, would this shaft fit?

Asked by: Bezza
If this is the White Hot #2 putter where the shaft installs over a post the SKP long putter shaft will not fit. The wall thickness at the tip end of this shaft is to thick to fit over the post. If your White Hot putter shaft installs over a post we do not have a long putter shaft that will fit. I believe all the Odyssey Center Shaft putters install over a post.
Answered by: JimY
Date published: 2017-04-17

What is the butt diameter of this shaft?

Asked by: John
The butt diameter on all 3 of these long putter shafts is .625".
Answered by: JimY
Date published: 2017-03-08

Would any of these shafts work in a Seemore MFGP? I'm trying to build a face-on putter with a 80 deg lie angle. I believe the head is bored at 70 degrees.

Asked by: Rangers032
Yes stepless ski pole (first one listed) will fit this Seemore putter. It would still need to be bent to your 80 degree lie angle. We only bend to 79 degrees. The USGA rule says 80 but we stay at 79 because of any tolerances in our measurement compared to the USGA's measurement. 79 is a common measurement in the industry for long putters. We should be able to bend this shaft for you but we do require you to send in the putter head so we are sure we get the bend set up correctly.
Answered by: JimY
Date published: 2017-03-06

I am building a custom putter and want to use this shaft in it. I am building a face on putter with a 80* shaft angle and I want a completely straight shaft without any bend in it. Would this be the right shaft for me?

Asked by: FLGofler18
The Stepless Ski Pole shaft will work as long as the shaft installs into the putter head. The Ski Pole shaft will not fit an over the post design putter.
Answered by: JimY
Date published: 2017-03-02

I have a 450 gram 72 degree lie putter head and would like to make it into a long putter with the length being 52 inches. Normally 79 degrees would be ideal for this length. Can the true temper straight ski pole be custom bent to achieve this angle?

Asked by: golfalot
Yes the Ski Pole long putter shaft can be bent to the 79 degree lie angle. One thing I will point out is the Ski Pole long putter shaft works with putter heads where the shaft installs into the putter head but does not fit an over the post design, just in case that is an issue. For custom bend shafts we request that the putter head be sent in to us so that we can make sure to get the bend set up to the correct lie angle. Here is the link to our Repair Form. https://www.golfworks.com/images/art/RepairForm.pdf
Answered by: JimY
Date published: 2017-02-23
  • y_2017, m_9, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_en_US, sid_SKP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks