True Temper Belly & Long putter shafts

True Temper Belly & Long putter shafts


Stepless Ski Pole 53" - 370 tip (163g)
$16.99
In Stock
Single Bend Ski Pole 53" - 370 tip (163g)
$16.99
In Stock
Double Bend Ski Pole 53" - 370 tip (163g)
$16.99
In Stock
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Belly & Long putter shafts

True Temper Long & Belly steel putter shafts are specifically designed for over length putters.

Features:
  • .370" tip diameter
  • Available in stepped, stepless, single bend and double bend profiles
  • Due to the extremely long parallel butt section the Ski Pole can also be cut to shorter lengths for belly putters

True Temper Belly & Long putter shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from trimming belly length your trimming instructions do not include belly putter length.
Date published: 2011-11-12
  • y_2017, m_3, d_24, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_SKP, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is the butt diameter of this shaft?

Asked by: John
The butt diameter on all 3 of these long putter shafts is .625".
Answered by: JimY
Date published: 2017-03-08

Would any of these shafts work in a Seemore MFGP? I'm trying to build a face-on putter with a 80 deg lie angle. I believe the head is bored at 70 degrees.

Asked by: Rangers032
Yes stepless ski pole (first one listed) will fit this Seemore putter. It would still need to be bent to your 80 degree lie angle. We only bend to 79 degrees. The USGA rule says 80 but we stay at 79 because of any tolerances in our measurement compared to the USGA's measurement. 79 is a common measurement in the industry for long putters. We should be able to bend this shaft for you but we do require you to send in the putter head so we are sure we get the bend set up correctly.
Answered by: JimY
Date published: 2017-03-06

I am building a custom putter and want to use this shaft in it. I am building a face on putter with a 80* shaft angle and I want a completely straight shaft without any bend in it. Would this be the right shaft for me?

Asked by: FLGofler18
The Stepless Ski Pole shaft will work as long as the shaft installs into the putter head. The Ski Pole shaft will not fit an over the post design putter.
Answered by: JimY
Date published: 2017-03-02

I have a 450 gram 72 degree lie putter head and would like to make it into a long putter with the length being 52 inches. Normally 79 degrees would be ideal for this length. Can the true temper straight ski pole be custom bent to achieve this angle?

Asked by: golfalot
Yes the Ski Pole long putter shaft can be bent to the 79 degree lie angle. One thing I will point out is the Ski Pole long putter shaft works with putter heads where the shaft installs into the putter head but does not fit an over the post design, just in case that is an issue. For custom bend shafts we request that the putter head be sent in to us so that we can make sure to get the bend set up to the correct lie angle. Here is the link to our Repair Form. https://www.golfworks.com/images/art/RepairForm.pdf
Answered by: JimY
Date published: 2017-02-23

I have a Scotty Cameron Big Sur S putter (Center shaft) long putter (46") and would like to replace the shaft. Which shaft would you recommend as a replacement? FYI - No bend in the shaft. Thanks.

Asked by: Matt
I would expect this to be a .370" tip size shaft and use the Ski Pole (SKP), the first one listed to order. The folks at Titleist and Cameron will not give out the tip size information for the Cameron putters but I would be very surprised if this model was not .370".
Answered by: JimY
Date published: 2017-02-14

will the single bend 53 inch shaft fit a odyssey dual force rossie 2, right now it has a 40 inch single bend shaft and it is way to short, also how much does it usually cost to have it re shafted and re gripped?thanks

Asked by: wyatt
The Odyssey putters are not a 90 degree hosel bore. The hosel bore is angled slightly towards the face and the single bend shaft has to much of a bend to set up correctly in this putter. Years ago I have the Rossie 2 and wanted to put a single bend putter shaft into it and had to do a custom bend shaft to get it to set up correctly. We do offer a 50" double bend Odyssey replacement shaft that could be cut down to 40" length for this putter. You will find it at this link. https://www.golfworks.com/odyssey-double-bend-replacement-putter-shafts/p/TT204102/
Answered by: JimY
Date published: 2017-02-13

I have a Scotty Cameron Select Newport 2 Dual Balance putter with a single bend shaft. Will your .370 tip single bend shaft fit it without an adapter or shim? Thanks

Asked by: Tain
This could be a .370" parallel tip or it could be a .350" or .355" taper tip single bend shaft. I do not know for sure and the folks at Titleist and Cameron will not give out that information. If it is a .350" or .355" taper tip single bend you will probably have to send it back to Titleist or Cameron. If it is a .370" parallel tip we could do a custom single bend shaft. When we do custom bends we request that you send the putter head to us so that we can be sure to get the bends set up correctly.
Answered by: JimY
Date published: 2017-02-07

Looking to buy a shaft, but there are no pictures of the shafts. Ho do I go about finding pictures. There appears to be an attempt at a picture. If it is, it is not adequate.

Asked by: Kong
We do not have any pictures of these shafts to show the single and double bend portions of these shafts. The single bend shaft will work with a 90 degree bore and create a lie angle only. The double bend shaft also works with a 90 degree bore and creates lie angle and offset. The straight shaft works with a putter head design where the bore angle (Lie Angle) is already bored into the putter head and generally for long putters that is in the 79 degree range. If you have more specific questions you can email me at jyachinich@golfworks.com
Answered by: JimY
Date published: 2017-01-30
  • y_2017, m_3, d_25, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_SKP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks