True Temper Command .370" Steel Iron Shafts

True Temper Command .370" Steel Iron Shafts


R/S Flex - 370 tip (127g) 3/4C1M
$4.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Command .370" Steel Iron Shafts

The True Temper Command is True Temper's best priced steel iron shaft.

Features:
  • .370" tip diameter
  • Competitively priced for use in virtually any golf club

Trimming Instructions

True Temper Command .370" Steel Iron Shafts is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Low ball fight, feel, and cost As with a previous review, I have these in an OG set of Maltby MMB heads. I've built and bought several sets of irons over the 6 years I've had them and I always come back to these irons. Yes. The MMB head is exceptional but they are a perfect fit with these shafts. I've tried comparable weight shafts in the mmbs, including dynamic gold s300 and x100 and found that for me the combination of ball fight, distance and feel the command offers almost noone if the compromises the others do.( I. E. S300 launchers higher, x100 lacks feel etc) I am considering updating my fairly beat up MMBS to the newer version and will not hesitate to build them with these shafts.
Date published: 2016-11-29
Rated 5 out of 5 by from Quality and great price Cost plays a big factor in my 5 star rating. That said, Most low cost steel iron shafts offer some compromise from comparable designs costing more money. I bought these shafts several years ago and they have seem time in several different irons and they have found a home in a set of original Maltby MMB's. They replaced some S300 SL's that launched too high, spun too much and ballooned to often. These shafts are on the heavier side, launch perfectly with my Digger Driver swing. I have a set of X100's I was going to soft step in these heads but I am so happy with the Commands I've decided to stick with them. I tipped these a 1/4" over recomended tipping for stiff. If you prefer a lower launch, heavier shaft, at a value price you can't go wrong with these.
Date published: 2013-09-09
Rated 5 out of 5 by from Quality and great price Cost plays a big factor in my 5 star rating. That said, Most low cost steel iron shafts offer some compromise from comparable designs costing more money. I bought these shafts several years ago and they have seem time in several different irons and they have found a home in a set of original Maltby MMB's. They replaced some S300 SL's that launched too high, spun too much and ballooned to often. These shafts are on the heavier side, launch perfectly with my Digger Driver swing. I have a set of X100's I was going to soft step in these heads but I am so happy with the Commands I've decided to stick with them. I tipped these a 1/4" over recomended tipping for stiff. If you prefer a lower launch, heavier shaft, at a value price you can't go wrong with these.
Date published: 2013-09-09
Rated 5 out of 5 by from Not Sure Yet Just re-shafted a set of CB-2 Blacks with the Tru Temper Command shafts. Going to play tomorrow. They feel great right now but time on the course and range will tell!! Bought a grip kit with the shafts and I love the way GolfWorks cuts the tape and the little spray bottle of solvent!! Made it much easier to do the project in my living room lol!!!! More to come on the Shafts
Date published: 2013-11-23
Rated 5 out of 5 by from Not Sure Yet Just re-shafted a set of CB-2 Blacks with the Tru Temper Command shafts. Going to play tomorrow. They feel great right now but time on the course and range will tell!! Bought a grip kit with the shafts and I love the way GolfWorks cuts the tape and the little spray bottle of solvent!! Made it much easier to do the project in my living room lol!!!! More to come on the Shafts
Date published: 2013-11-23
  • y_2017, m_5, d_22, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_TT201103, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Where do I find the cart for the correct lengths to cut off at the tips and butts for the command shafts?

Asked by: Taz
The link to the trimming instructions is below. You will need to scroll down to the second page of the trimming instructions to get the proper instructions for the command iron shafts. The trim code for the Command iron shafts is IR25 for and R flex and IR14 for an S flex. https://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: GW2002
Date published: 2017-04-27

Is the true temper shaft a parallel shaft?

Asked by: Taz
Yes the True Temper Command is a .370" parallel tip shaft.
Answered by: JimY
Date published: 2017-04-25

Is this a parallel shaft??

Asked by: Taz
Yes the True Temper Command is a .370" parallel tip shaft.
Answered by: JimY
Date published: 2017-04-25

how do I get the right length shaft to fix my 6 iron?

Asked by: Dale
The True Temper Command iron shaft is a R/S combination flex shaft that requires tip trimming for flex, and after assembly trimming to final playing length from the butt end of the shaft. Men's modern standard length for a 6 iron would be 37.5". This can vary by manufacturer. Assuming you need standard length, you would trim 2.5" from the tip for an R flex, or 3.5" from the tip for an S flex in the Command shaft. After assembly, you then would trim to your final playing length from the butt end of the shaft. Below is a link to The Golfworks 2 page trimming instruction chart. https://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: GW2002
Date published: 2017-03-26

Hi, I'd like to make an offer: I am  interested in buying 100 shafts $3.25 each.  I look forward to doing business with you.  L. Kendall 

Asked by: 1Strokeup
You need to contact our special accounts team for individual volume price quotes. kfrench@golfworks.com or mmasters@golfworks.com
Answered by: GW2002
Date published: 2017-03-26

Hello, I have the King Cobra SS-i irons. Do these shafts fit those irons ? Thank You Very Much!

Asked by: Gaby
No the True Temper Command will not fit the Cobra SS-i irons. The SS-i irons use a .355" taper tip shaft and the Command is only available in a .370" parallel tip shaft. The TT Lite XL (2XLI) shafts will fit the Cobra SS-i irons and so will the Apollo Matchflex Irons (AP0001). https://www.golfworks.com/true-temper-tt-lite-xl-steel-iron-shafts/p/2XLI/ https://www.golfworks.com/apollo-matchflex-iron-shafts/p/AP0001/
Answered by: JimY
Date published: 2017-03-26

i'm thinking about putting 37.25 length shafts in Titleist 690.MB's 5-pw. I would like the flex to be between reg and stiff. i'm not sure what tip diameter I need. I will use a mid size grip. any suggestions? either graphite or steel thanks in advance

Asked by: exrog
Your Titleist Irons use a .355" taper tip shaft. You might want to use our MPF Shaft Fitting Worksheet. Answer the questions and it will create a 4 digit code. When you click on get your MPF it will bring up the shafts in your code for you to see. The questions will help you to answer "what you want these shafts to do for you". It is hard for me to make good recommendations without knowing what you want or need these shafts to do for you. https://www.golfworks.com/mpf-shaft-fitting-worksheet/a/496/
Answered by: JimY
Date published: 2017-03-26

i'm thinking about putting 37.25 length shafts in Titleist 690.MB's 5-pw. I would like the flex to be between reg and stiff. i'm not sure what tip diameter I need. I will use a mid size grip. any suggestions? either graphite or steel thanks in advance.

Asked by: exrog
Your Titleist Irons use a .355" taper tip shaft. You might want to use our MPF Shaft Fitting Worksheet. Answer the questions and it will create a 4 digit code. When you click on get your MPF it will bring up the shafts in your code for you to see. The questions will help you to answer "what you want these shafts to do for you". It is hard for me to make good recommendations without knowing what you want or need these shafts to do for you. https://www.golfworks.com/mpf-shaft-fitting-worksheet/a/496/
Answered by: JimY
Date published: 2017-03-26
  • y_2017, m_5, d_23, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_TT201103, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks