True Temper Command Steel Wood Shafts

True Temper Command Steel Wood Shafts


R/S Flex - 335 tip (127g) 3/4B2M
$4.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Command Steel Wood Shafts

The True Temper Command is True Temper's best priced steel wood shaft.

Features:
  • .335" tip diameter
  • Competitively priced for use in virtually any golf club

Trimming Instructions

True Temper Command Steel Wood Shafts is rated 4.8 out of 5 by 5.
Rated 5 out of 5 by from Great value. These are excellent steel shaft alternatives for fairway metals. I also use them with older (smaller) driver heads for a "retro" look & feel. I can't tell the difference between these and Dynamic Gold. I have several modern, bigger driver heads mated with these shafts and cut to "retro" lengths of about 43.5" - 44" overall club length, and they are VERY accurate. Easier to control than longer graphite shafted drivers, although not as long hitting. I'll take middle of the fairway over really long and in the weeds any day.
Date published: 2015-06-02
Rated 5 out of 5 by from Installed them on my Iron set Got these for my Irons, wanted to replace graphite shafts, lost no distance and very pleased with controll.Long and straight shots.Feel is great.
Date published: 2010-06-15
Rated 5 out of 5 by from super steel got this shaft in a 8.5 360 Ti at 47" Long and straght good bye graphite no loss in distance but gained accuracy I did spine them...m
Date published: 2009-11-17
Rated 5 out of 5 by from true temper steel shaft this shaft works well for me I don't have to lay into my drive as much as I did with the graphite shaft that I replaced
Date published: 2016-08-11
Rated 4 out of 5 by from Just what I expected. Very pleased with the golf shaft and the performance.
Date published: 2015-11-09
  • y_2017, m_2, d_25, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_TT202101, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Are the TT .355 Command Steel Wood shafts taper tipped?

Asked by: slmealor
The Command Steel wood shafts are .335" parallel tip shaft. They do not come with a taper tip. There are no taper tip wood shafts made these days.
Answered by: JimY
Date published: 2017-02-21

Can I get a driver shaft in steel for my titeist 915 D titanium or KBS equivalent ?

Asked by: s4 lancia
Yes you can. The only steel wood shafts available these days are the True Temper Command, which is an R/S Combination flex and the Dynamic Gold (UDGW). In the Dynamic Gold we stock the R300, S300 & X100 flexes. http://www.golfworks.com/true-temper-dynamic-gold-steel-wood-shafts/p/UDGW/
Answered by: JimY
Date published: 2017-02-08

Can these shafts be trimmed to an A flex?

Asked by: Swampfox
Sorry, No you would not be able to trim the woods shafts to play like an A flex.
Answered by: JimY
Date published: 2017-01-31

Opps, forgot to ask if they are .355 tapered?

Asked by: slmealor
The True Temper Command is only available in a .370" parallel tip.
Answered by: JimY
Date published: 2017-01-30

Can these shafts be tipped stiff and installed in irons and still preform?

Asked by: slmealor
The Command is a R/S combination flex shaft that can be cut to either and R flex or S flex so yes it could be cut to a Stiff flex and perform just fine.
Answered by: JimY
Date published: 2017-01-30

I have five callaway war birds ( 4 5 7 9 11 )I don't know hosel depth, standard length medal head.

Asked by: enigma 43
If these are the older original Callaway War Bird fairway woods they are a bore through design where the shaft goes all the way through the bottom of the sole. Generally the bore depth of these heads all the way through the bottom was in the 1.25" range. From what information I can find here are the standard lengths that Callaway used with graphite shafts. 4 = 42.5" 5 = 42" 7 = 41.5" 9 = 41" 11 = 40.5"
Answered by: JimY
Date published: 2016-11-22

where is the flex point on this shaft?

Asked by: Flubdub
The Command is a mid bend point shaft. You can read the shaft specifications by scrolling down to the bottom of the page at this link. http://www.golfworks.com/product.asp?pn=TT202101
Answered by: JimY
Date published: 2016-02-22

I previously assembled a bunch of clubs with the (sadly discontinued) TT Lite XL R/S .335 shafts.  In terms of stiffness and ball flight, how would you compare the Command to the TT Lite XL?

Asked by: TDW
The Command wood shaft would be a very good replacement for the discontinued TT Lite. Weights, specifications and playability are similar.
Answered by: Kevin F
Date published: 2015-04-24
  • y_2017, m_2, d_23, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_TT202101, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks