True Temper Dynalite 100 .370" Steel Iron Shafts

True Temper Dynalite 100 .370" Steel Iron Shafts

1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

We Also Recommend

True Temper Dynalite 100 .370" Steel Iron Shafts

The True Temper Dynalite steel iron shaft's lightweight, low flex design has made it a favorite among golfers of all skill levels.

  • .370" tip diameter

Trimming Instructions

True Temper Dynalite 100 .370" Steel Iron Shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Dynalites Perform Nice shaft. The long parallel tip gives control and feel. Not tooo light. When the shafts become too light, the whole club is too light, the core muscles do not know when to fire and spray the ball. The long raw shaft gives the ability to play longer clubs with out adding an extension. Nice shaft, good feel.
Date published: 2015-08-22
  • y_2018, m_1, d_21, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_UMGLI, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I'm looking for a replacement for my dynalite 105s on my Nike covert irons. Would these irons be similar in feel?

Asked by: Payango71
The Dyanlite 100 would match the weight and playing characteristics of the Dynalite 105 shaft used by Nike but we only have the A/L shaft left in stock. The A/L is a Senior or Ladies flex shaft. The Score LT (TT0100) in the R/S flex could be a good replacement if you need a Regular or Stiff flex.
Answered by: JimY
Date published: 2017-08-14

i have adams idea with dynalite shaft  the specs say they are 85 grams.  the dynalite shaft on web site says they are 118 grams.  I need a 8 iron shaft to replace my snapped one can you tell me which shaft will come closest to what I currently have ?

Asked by: bob
The Dynalite 85 gram shaft would have been made exclusively for Adams Golf and is not available at aftermarket. The closest shaft in both weight and playing characteristics that we have available would be the True Temper XP95 TT0113. At this moment the shafts are showing backordered but we did just receive them and should have them ready to ship in the next day or so.
Answered by: JimY
Date published: 2017-08-09

I have CI11 Wilson clubs! have been told shafts don't get it in the air enough,any recommendations you could make for me?

Asked by: Neill1122
Chances are the stock shaft in these Wilson Irons is similar to the Dynalite shaft in weight and playing characteristics. You might be better to look at a shaft like the True Temper XP 95 (TT0113) which is lighter and designed for a high trajectory.
Answered by: JimY
Date published: 2017-04-24

3 or 4 years ago I bought Dynalite 100 shafts from Golfworks to reshaft a set. Reshafting another set, I'm wondering if this is the same shaft, as the shaft labels are different. Old shaft label was black with gold lettering "Dynalite 100". Please advise.

Asked by: RobbieInRaleigh
Yes this is the same Dynalite shaft, True Temper just changed the shaft band.
Answered by: JimY
Date published: 2017-02-07

what true temper shaft is in the hi bore irons new steel /I have graphite stiff original shafts now want to go to steel stiff / 63 years old swing around 80 to 88 mph please help (thought dynalite 100 is a good shaft for me ?)

Asked by: bert
The stock steel shaft in the Cleveland Hi Bore irons was called a Hi Bore Steel shaft and was made exclusively for Cleveland by True Temper. It was listed as a 111 gram weight steel shaft. The Dynalite 100 would be a good replacement for the stock shaft.
Answered by: JimY
Date published: 2017-01-26

My question if you want to soft tip a stiff shaft (dynalite 100) how much do you take off say 5 iron vs. what it calls for? any idea how much CPM soft tipping a shaft reduces the CPM?

Asked by: SILVER FOX
With most True Temper shafts there would be a 2" difference between and R and S flex. If you wanted to make the Dynalite 100 S flex play like an R flex you would tip trim 2" less then what is recommended. If 2" is a change of flex then 1/2" would be equal to a quarter of a flex. With almost all steel shafts 1/2" of tip trimming is equal to 3 to 5 cpm's in frequency.
Answered by: JimY
Date published: 2016-12-19

Can u help I bought rocketballz high launch irons last year they r stiff irons I can't hit them for distance I hit them straight what would you recommend for me I don't have the fastest swing speed I would like to replace them 

Asked by: Brian
If you have a Stiff flex shaft and you do not have a fast swingspeed that could be causing you distance. A shaft like the Dynalite 100 in an R flex could help. You may even look at a lighter weight shaft like the True Temper Multi-Step (TT0061) or the FST 90 (FS0011). The Multi-Step is similar in weight and playing characteristics as the Dynalite 100 and the FST 90 is lighter in weight then these two shafts.
Answered by: JimY
Date published: 2016-12-05

Can anyone tell or direct me to the step pattern and tip length on this shaft? I'm trying to see if this matches up to a Wilson Ci iron shaft that feels really nice to me.

Asked by: jedc
The predominant steps on a Dynalite measure 1.25". Tip to first step measurement is 10.5".
Answered by: JimY
Date published: 2016-04-13
  • y_2018, m_1, d_21, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_UMGLI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks