True Temper Dynalite 100 .370" Steel Iron Shafts

True Temper Dynalite 100 .370" Steel Iron Shafts


L/A Flex - 370 tip (112g) 1/2D3H
$10.15
In Stock
R/S Flex - 370 tip (122g) 3/4D3H
$10.15
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

We Also Recommend

True Temper Dynalite 100 .370" Steel Iron Shafts

The True Temper Dynalite steel iron shaft's lightweight, low flex design has made it a favorite among golfers of all skill levels.

Features:
  • .370" tip diameter

Trimming Instructions

True Temper Dynalite 100 .370" Steel Iron Shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Dynalites Perform Nice shaft. The long parallel tip gives control and feel. Not tooo light. When the shafts become too light, the whole club is too light, the core muscles do not know when to fire and spray the ball. The long raw shaft gives the ability to play longer clubs with out adding an extension. Nice shaft, good feel.
Date published: 2015-08-22
  • y_2017, m_5, d_19, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_UMGLI, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have CI11 Wilson clubs! have been told shafts don't get it in the air enough,any recommendations you could make for me?

Asked by: Neill1122
Chances are the stock shaft in these Wilson Irons is similar to the Dynalite shaft in weight and playing characteristics. You might be better to look at a shaft like the True Temper XP 95 (TT0113) which is lighter and designed for a high trajectory. https://www.golfworks.com/true-temper-dynamic-gold-xp95-steel-iron-shafts/p/TT0113/
Answered by: JimY
Date published: 2017-04-24

3 or 4 years ago I bought Dynalite 100 shafts from Golfworks to reshaft a set. Reshafting another set, I'm wondering if this is the same shaft, as the shaft labels are different. Old shaft label was black with gold lettering "Dynalite 100". Please advise.

Asked by: Robbie In Raleigh
Yes this is the same Dynalite shaft, True Temper just changed the shaft band.
Answered by: JimY
Date published: 2017-02-07

what true temper shaft is in the hi bore irons new steel /I have graphite stiff original shafts now want to go to steel stiff / 63 years old swing around 80 to 88 mph please help (thought dynalite 100 is a good shaft for me ?)

Asked by: bert
The stock steel shaft in the Cleveland Hi Bore irons was called a Hi Bore Steel shaft and was made exclusively for Cleveland by True Temper. It was listed as a 111 gram weight steel shaft. The Dynalite 100 would be a good replacement for the stock shaft.
Answered by: JimY
Date published: 2017-01-26

My question if you want to soft tip a stiff shaft (dynalite 100) how much do you take off say 5 iron vs. what it calls for? any idea how much CPM soft tipping a shaft reduces the CPM?

Asked by: SILVER FOX
With most True Temper shafts there would be a 2" difference between and R and S flex. If you wanted to make the Dynalite 100 S flex play like an R flex you would tip trim 2" less then what is recommended. If 2" is a change of flex then 1/2" would be equal to a quarter of a flex. With almost all steel shafts 1/2" of tip trimming is equal to 3 to 5 cpm's in frequency.
Answered by: JimY
Date published: 2016-12-19

Can u help I bought rocketballz high launch irons last year they r stiff irons I can't hit them for distance I hit them straight what would you recommend for me I don't have the fastest swing speed I would like to replace them 

Asked by: Brian
If you have a Stiff flex shaft and you do not have a fast swingspeed that could be causing you distance. A shaft like the Dynalite 100 in an R flex could help. You may even look at a lighter weight shaft like the True Temper Multi-Step (TT0061) or the FST 90 (FS0011). The Multi-Step is similar in weight and playing characteristics as the Dynalite 100 and the FST 90 is lighter in weight then these two shafts.
Answered by: JimY
Date published: 2016-12-05

Can anyone tell or direct me to the step pattern and tip length on this shaft? I'm trying to see if this matches up to a Wilson Ci iron shaft that feels really nice to me.

Asked by: jedc
The predominant steps on a Dynalite measure 1.25". Tip to first step measurement is 10.5".
Answered by: JimY
Date published: 2016-04-13

If you start with 122g weight for the R/S flex, what will 6 iron shaft end up weighing with 4.5 inches trimmed off? Thanks. 

Asked by: Johnno
My calculations tell me approximately 109 grams for the weight of the cut 6 iron shaft. I take the weight of the shaft, 122 grams, divide it by the raw length of the shaft, 42", which gives me approximately 2.9 grams per inch. Mulitply that by 4.5" which is just over 13 grams. 122 minus 13 equals 109 grams.
Answered by: JimY
Date published: 2017-02-04

Have old TT steel iron shaft with laser etching of "ULIC" at butt end. Can you tell me what True Temper model that is...I would like to order more. Thanks,Gary

Asked by: GOB66
ULIC was the True Temper Dynalite combination flex shaft. It was sold in an A/L flex and an R/S flex. True Temper discontinued this shaft a few years ago and really did not replace it with a new shaft. We do still have some in stock. You will find them at this link. http://www.golfworks.com/product.asp?pn=UMGLI
Answered by: JimY
Date published: 2015-06-29
  • y_2017, m_5, d_19, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_UMGLI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks