True Temper Dynamic Gold .355" Steel Iron Shafts

True Temper Dynamic Gold .355" Steel Iron Shafts


R300 41.0 (#1) - .355 tip 3C1M
$21.99
In Stock
R300 40.5 (#2) - .355 tip 3C1M
$21.99
In Stock
R300 40.0 (#3) - .355 tip 3C1M
$21.99
In Stock
R300 39.5 (#4) - .355 tip 3C1M
$21.99
In Stock
R300 39.0 (#5) - .355 tip 3C1M
$21.99
In Stock
R300 38.5 (#6) - .355 tip 3C1M
$21.99
In Stock
R300 38.0 (#7) - .355 tip 3C1M
$21.99
In Stock
R300 37.5 (#8) - .355 tip 3C1M
$21.99
In Stock
R300 37.0 (#9, Wedge) - .355 tip 3C1M
$21.99
In Stock
R400 40.5 (#2) - .355 tip 3C1M
$21.99
In Stock
R400 40.0 (#3) - .355 tip 3C1M
$21.99
In Stock
R400 39.5 (#4) - .355 tip 3C1M
$21.99
In Stock
S200 41.0 (#1) - .355 tip 4C1M
$21.99
In Stock
S200 40.5 (#2) - .355 tip 4C1M
$21.99
In Stock
S200 40.0 (#3) - .355 tip 4C1M
$21.99
In Stock
S200 39.5 (#4) - .355 tip 4C1M
$21.99
In Stock
S200 39.0 (#5) - .355 tip 4C1M
$21.99
In Stock
S200 38.5 (#6) - .355 tip 4C1M
$21.99
In Stock
S200 38.0 (#7) - .355 tip 4C1M
$21.99
In Stock
S200 37.5 (#8) - .355 tip 4C1M
$21.99
In Stock
S200 37.0 (#9,PW,SW,LW) - .355 tip 4C1M
$21.99
In Stock
S300 41.0 (#1) - .355 tip 4C1M
$21.99
In Stock
S300 40.5 (#2) - .355 tip 4C1M
$21.99
In Stock
S300 40.0 (#3) - .355 tip 4C1M
$21.99
In Stock
S300 39.5 (#4) - .355 tip 4C1M
$21.99
In Stock
S300 39.0 (#5) - .355 tip 4C1M
$21.99
In Stock
S300 38.5 (#6) - .355 tip 4C1M
$21.99
In Stock
S300 38.0 (#7) - .355 tip 4C1M
$21.99
In Stock
S300 37.5 (#8) - .355 tip 4C1M
$21.99
In Stock
S300 37.0 (#9,PW,SW,LW) - .355 tip 4C1M
$21.99
In Stock
S400 41.0 (#1) - .355 tip 4C1M
$21.99
In Stock
S400 40.5 (#2) - .355 tip 4C1M
$21.99
In Stock
S400 40.0 (#3) - .355 tip 4C1M
$21.99
In Stock
S400 39.5 (#4) - .355 tip 4C1M
$21.99
In Stock
S400 39.0 (#5) - .355 tip 4C1M
$21.99
In Stock
S400 38.5 (#6) - .355 tip 4C1M
$21.99
In Stock
S400 38.0 (#7) - .355 tip 4C1M
$21.99
In Stock
S400 37.5 (#8) - .355 tip 4C1M
$21.99
In Stock
S400 37.0 (#9,PW,SW,LW) - .355 tip 4C1M
$21.99
In Stock
X100 41.0 (#1) - .355 tip 5C1M
$21.99
Backordered
X100 40.5 (#2) - .355 tip 5C1M
$21.99
In Stock
X100 40.0 (#3) - .355 tip 5C1M
$21.99
In Stock
X100 39.5 (#4) - .355 tip 5C1M
$21.99
In Stock
X100 39.0 (#5) - .355 tip 5C1M
$21.99
In Stock
X100 38.5 (#6) - .355 tip 5C1M
$21.99
In Stock
X100 38.0 (#7) - .355 tip 5C1M
$21.99
In Stock
X100 37.5 (#8) - .355 tip 5C1M
$21.99
In Stock
X100 37.0 (#9,PW,SW,LW) - .355 tip 5C1M
$21.99
In Stock
X200 41.0 (#1) - .355 tip 5C1M
$21.99
In Stock
X200 40.5 (#2) - .355 tip 5C1M
$21.99
In Stock
X200 40.0 (#3) - .355 tip 5C1M
$21.99
In Stock
X200 39.5 (#4) - .355 tip 5C1M
$21.99
Backordered
X200 39.0 (#5) - .355 tip 5C1M
$21.99
In Stock
X200 38.5 (#6) - .355 tip 5C1M
$21.99
Backordered
X200 38.0 (#7) - .355 tip 5C1M
$21.99
Backordered
X200 37.5 (#8) - .355 tip 5C1M
$21.99
Backordered
X200 37.0 (#9,PW,SW,LW) - .355 tip 5C1M
$21.99
Backordered
X300 41.0 (#1) - .355 tip 5C1M
$21.99
Backordered
X300 40.5 (#2) - .355 tip 5C1M
$21.99
Backordered
X300 40.0 (#3) - .355 tip 5C1M
$21.99
In Stock
X300 39.5 (#4) - .355 tip 5C1M
$21.99
Backordered
X300 39.0 (#5) - .355 tip 5C1M
$21.99
Backordered
X300 38.5 (#6) - .355 tip 5C1M
$21.99
In Stock
X300 38.0 (#7) - .355 tip 5C1M
$21.99
Backordered
X300 37.5 (#8) - .355 tip 5C1M
$21.99
Backordered
X300 37.0 (#9,PW,SW,LW) - .355 tip 5C1M
$21.99
Backordered
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95
OR

Buy The Complete Set

Product Name
Price
Qty
S3 DG #3-PW .355 Tapered Set
$175.92
X1 DG #3-PW .355 Tapered Set
$175.92

True Temper Dynamic Gold .355" Steel Iron Shafts

The #1 shaft in golf. The True Temper Dynamic Gold is a high-flex, tour weighted steel iron shaft that is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

Features:
  • .355" tip diameter
  • Lightweight steel with a high bend point yielding a more tour preferred ball flight

Trimming Instructions

True Temper Dynamic Gold .355" Steel Iron Shafts is rated 4.6 out of 5 by 13.
Rated 5 out of 5 by from Spectacular, time-tested, shanker-approved shaft! If you are unhappy with your stock steel shafts, these are, in my opinion, the go-to shaft for anyone. They can be had in a number of different flexes to suit your needs. I had AWT stiff shafts in my Ping G irons at normal length gapping - a lot of R&D went into designing these so that they are weighted differently depending on the loft of the iron making them heavier in the higher lofts and lighter in the lower lofts to promote WHAT, I have no idea - basically they made for to much inconstancy in my swing. I swapped them out for TT DG S300 at .3" gapping in length (instead of .5") and it has made for a much more consistent ball striking experience for this hacker. Also, Golf Works is the bomb! They are a very helpful, reasonably priced, one-stop shop for all your club building needs. Your stuff ships out quickly too. Cheers, to Golf Works.
Date published: 2017-03-24
Rated 5 out of 5 by from Sometimes high tech is over rated ! With all the "new" steel shafts on the market to choose from True Temper Dynamic Gold stands the test of time ! Still the most consistent across the board, it is my go to when an experiment doesn't pan out .
Date published: 2015-05-04
Rated 4 out of 5 by from The Dynamic Gold Shaft i still the work horse for The X-100 shaft provides feel and control. This shaft is still the best for the money.
Date published: 2015-07-14
Rated 5 out of 5 by from Dynamic Gold is gold! Ever sense I was14 I have used DGs300 iron shafts. I have tried other brands and they just don't match up with feel and consistancy! I will never try another brand again. Thank you for taking such care and respect for the products you provide to us diehard lovers of golf. Thank you so much from an extremely satisfied costumer! BRIAN BRADLEY WILKINS
Date published: 2015-08-15
Rated 5 out of 5 by from X100 X Stiff Bought these to replace a set of Rifle flighted shafts in my R7 TP irons. Feel good, not too stiff especially after I set the clubs to D3 swingweight (I'm 6'4"). Easy to install with some collared ferrules.
Date published: 2017-03-02
Rated 1 out of 5 by from Hi Not happy with the explanation ... It dos not say haw many grams it is . And not only on this shaft on many adders
Date published: 2014-09-27
Rated 5 out of 5 by from Still the best shaft out there! I have tried all the new shafts available and i still go back to this one! Golf works was great to work with and i received shipment fast.
Date published: 2016-10-16
Rated 5 out of 5 by from Good quality and delivery Was very pleased with the pricing and the service. I was able to get the shafts to my repair shop and now back on the course!!
Date published: 2016-08-31
  • y_2017, m_3, d_26, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_DGI, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Do the .355 tapers have progressive weighting or profiles in any like the DG Pros? Or does the taper just prevent one from having to tip trim? Thanks in advance.

Asked by: Devon
The DGI Dnamic Gold irons are constant weight. The DG Pro's and the AMT's are progressive weight designs. The DGI is a .355 taper tip design, not just for the reason of no tip trimming, but because many current and models of the past require a .355 taper tip design shaft.
Answered by: GW2002
Date published: 2017-03-23

can I order my shafts precut 0.5"?

Asked by: Robert
Yes you can order the shafts precut for your irons. It could be best to call in your order at 1-800-848-8358 and a Customer Service Rep can walk you through your order to make sure we get all the information we need to do this for you.
Answered by: JimY
Date published: 2017-03-14

are those the standard lengths for these true temper steel shafts?

Asked by: Robert
They are the standard raw lengths for the Dynamic Gold shafts. The shafts are installed into the clubheads and then cut from the grip end to the finished club length.
Answered by: JimY
Date published: 2017-03-14

I play my clubs at 1.5" over regular. If I wanted to reshaft my irons with X100's, would I get corresponding numbers (ie. #5 for 5i) or would I have to hard step the shafts to make it work for length? Please let me know

Asked by: Frank
It could depend on which irons you have. Iron head designs add generally from 1" to 1.25" to the finished clublength because the shaft does not go all the way to the ground. With the X100 shafts the 5 iron shaft is 39" long so when it is installed into a 5 iron head the finished club length could be 40" to 40.25" depending on which irons you have. Most manufactures use 38" as a standard finished length 5 iron so plus 1.5" would be 39.5" so you would have plenty of length to use the 5 iron shaft in the 5 iron head. At 1.5" longer the shaft flex will get a little more flexible then normal so hard stepping one club could be a good idea and you should have just enough length to do this. It just depends on which irons you have.
Answered by: JimY
Date published: 2017-03-07

I am locking for a shaft for the vokey wedges, The s200 but i dont now wich one of all the s200 options 

Asked by: Ggodoy30000
The Vokey wedges traditionally have always used Dynamic Gold shafts. They are a .355" taper tip and for the wedges it would be the 37" raw length. So you want the DGI S200 37" shaft.
Answered by: JimY
Date published: 2017-03-07

I am looking for an ultra light steel shaft for Ping G25 irons. 

Asked by: gene
Ping G25 irons use .355" taper tip shafts. The lightest weight steel shaft available is the Nippon N.S. Pro Zelos 7 (NP0014) which is a mid 70 gram weight steel shaft. This year they also introduced the N.S. Pro Zelos 8 (NP0023) which is a mid 80 gram weight steel shaft. Here are the links for the other most commonly used light weight shafts that will fit the Ping Irons. At these links if you scroll down the page you will see the specifications for these shafts. Nippon N.S. Pro 8950GH (NP0005) Nippon N.S. Pro 950GH (NP0012) KBS Tour 90 (FS0023) True Temper XP95 (TT0101)
Answered by: JimY
Date published: 2017-02-23

My name is Chris Brooks I need new shafts for my irons 4 through pw but I need them a quarter of an inch longer than standard can u do this are do u have them I would true temper

Asked by: Chris
We can cut them 1/4" longer for you. You might want to call our Customer Service Department at 1-800-848-8358 and they can help you with your order.
Answered by: JimY
Date published: 2017-02-20

Will there be much of a trajectory difference between S200 and S300?

Asked by: az1994
No really none at all. In a frequency machine there is a 2 cpm difference between the S200 and S300 and with a Dynamic Gold there are 15 cpm's between and R300 and S300. The shafts are sorted by weight and an S200 weights 2 grams less then an S300.
Answered by: JimY
Date published: 2017-02-15
  • y_2017, m_3, d_26, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_55
  • loc_en_US, sid_DGI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks