True Temper Dynamic Gold .355" Steel Iron Shafts

True Temper Dynamic Gold .355" Steel Iron Shafts


R300 41.0 (#1) - .355 tip 3C1M
$21.99
In Stock
R300 40.5 (#2) - .355 tip 3C1M
$21.99
In Stock
R300 40.0 (#3) - .355 tip 3C1M
$21.99
In Stock
R300 39.5 (#4) - .355 tip 3C1M
$21.99
In Stock
R300 39.0 (#5) - .355 tip 3C1M
$21.99
In Stock
R300 38.5 (#6) - .355 tip 3C1M
$21.99
In Stock
R300 38.0 (#7) - .355 tip 3C1M
$21.99
In Stock
R300 37.5 (#8) - .355 tip 3C1M
$21.99
In Stock
R300 37.0 (#9, Wedge) - .355 tip 3C1M
$21.99
In Stock
R400 40.5 (#2) - .355 tip 3C1M
$21.99
In Stock
R400 40.0 (#3) - .355 tip 3C1M
$21.99
In Stock
R400 39.5 (#4) - .355 tip 3C1M
$21.99
In Stock
S200 41.0 (#1) - .355 tip 4C1M
$21.99
In Stock
S200 40.5 (#2) - .355 tip 4C1M
$21.99
In Stock
S200 40.0 (#3) - .355 tip 4C1M
$21.99
In Stock
S200 39.5 (#4) - .355 tip 4C1M
$21.99
In Stock
S200 39.0 (#5) - .355 tip 4C1M
$21.99
In Stock
S200 38.5 (#6) - .355 tip 4C1M
$21.99
In Stock
S200 38.0 (#7) - .355 tip 4C1M
$21.99
In Stock
S200 37.5 (#8) - .355 tip 4C1M
$21.99
In Stock
S200 37.0 (#9,PW,SW,LW) - .355 tip 4C1M
$21.99
In Stock
S300 41.0 (#1) - .355 tip 4C1M
$21.99
In Stock
S300 40.5 (#2) - .355 tip 4C1M
$21.99
In Stock
S300 40.0 (#3) - .355 tip 4C1M
$21.99
In Stock
S300 39.5 (#4) - .355 tip 4C1M
$21.99
In Stock
S300 39.0 (#5) - .355 tip 4C1M
$21.99
In Stock
S300 38.5 (#6) - .355 tip 4C1M
$21.99
In Stock
S300 38.0 (#7) - .355 tip 4C1M
$21.99
In Stock
S300 37.5 (#8) - .355 tip 4C1M
$21.99
In Stock
S300 37.0 (#9,PW,SW,LW) - .355 tip 4C1M
$21.99
In Stock
S400 41.0 (#1) - .355 tip 4C1M
$21.99
In Stock
S400 40.5 (#2) - .355 tip 4C1M
$21.99
In Stock
S400 40.0 (#3) - .355 tip 4C1M
$21.99
In Stock
S400 39.5 (#4) - .355 tip 4C1M
$21.99
In Stock
S400 39.0 (#5) - .355 tip 4C1M
$21.99
In Stock
S400 38.5 (#6) - .355 tip 4C1M
$21.99
In Stock
S400 38.0 (#7) - .355 tip 4C1M
$21.99
In Stock
S400 37.5 (#8) - .355 tip 4C1M
$21.99
In Stock
S400 37.0 (#9,PW,SW,LW) - .355 tip 4C1M
$21.99
In Stock
X100 41.0 (#1) - .355 tip 5C1M
$21.99
In Stock
X100 40.5 (#2) - .355 tip 5C1M
$21.99
In Stock
X100 40.0 (#3) - .355 tip 5C1M
$21.99
In Stock
X100 39.5 (#4) - .355 tip 5C1M
$21.99
In Stock
X100 39.0 (#5) - .355 tip 5C1M
$21.99
In Stock
X100 38.5 (#6) - .355 tip 5C1M
$21.99
In Stock
X100 38.0 (#7) - .355 tip 5C1M
$21.99
In Stock
X100 37.5 (#8) - .355 tip 5C1M
$21.99
In Stock
X100 37.0 (#9,PW,SW,LW) - .355 tip 5C1M
$21.99
In Stock
X200 41.0 (#1) - .355 tip 5C1M
$21.99
In Stock
X200 40.5 (#2) - .355 tip 5C1M
$21.99
In Stock
X200 40.0 (#3) - .355 tip 5C1M
$21.99
Backordered
X200 39.5 (#4) - .355 tip 5C1M
$21.99
Backordered
X200 39.0 (#5) - .355 tip 5C1M
$21.99
In Stock
X200 38.5 (#6) - .355 tip 5C1M
$21.99
Backordered
X200 38.0 (#7) - .355 tip 5C1M
$21.99
Backordered
X200 37.5 (#8) - .355 tip 5C1M
$21.99
Backordered
X200 37.0 (#9,PW,SW,LW) - .355 tip 5C1M
$21.99
Backordered
X300 41.0 (#1) - .355 tip 5C1M
$21.99
Backordered
X300 40.5 (#2) - .355 tip 5C1M
$21.99
Backordered
X300 40.0 (#3) - .355 tip 5C1M
$21.99
In Stock
X300 39.5 (#4) - .355 tip 5C1M
$21.99
Backordered
X300 39.0 (#5) - .355 tip 5C1M
$21.99
Backordered
X300 38.5 (#6) - .355 tip 5C1M
$21.99
In Stock
X300 38.0 (#7) - .355 tip 5C1M
$21.99
Backordered
X300 37.5 (#8) - .355 tip 5C1M
$21.99
Backordered
X300 37.0 (#9,PW,SW,LW) - .355 tip 5C1M
$21.99
Backordered
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95
OR

Buy The Complete Set

Product Name
Price
Qty
S3 DG #3-PW .355 Tapered Set
$175.92
X1 DG #3-PW .355 Tapered Set
$175.92

True Temper Dynamic Gold .355" Steel Iron Shafts

The #1 shaft in golf. The True Temper Dynamic Gold is a high-flex, tour weighted steel iron shaft that is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

Features:
  • .355" tip diameter
  • Lightweight steel with a high bend point yielding a more tour preferred ball flight

Trimming Instructions

Not Found.

I'm looking for a replacement shaft for a Dynamic Gold DGTIX7 6 iron shaft with a tip Dia. of .355 If not available what would you recommend I use. CPM with grip on was 315 CPM

Asked by: Ralph
This would be the Dynamic Gold X7 shaft which are sold in sets only and we cannot order just a 6 iron shaft. The closest shaft we would have is the Dynamic Gold X100 (DGI). You would order the 38.5" raw length shaft. You can see the specifications of the DG X7 at this link. https://www.truetemper.com/products/dynamic-gold-x7/
Answered by: JimY
Date published: 2017-05-15

I want 1/2 inch more standard can i cut 1/2 on the tip for obtain more stiff? ..i know it entry into the hosel..

Asked by: Leonard
No, you cannot tip trim a .355" taper tip shaft. If you do it will not longer fit into a .355" tapered hosel bore. At 1/2" longer the shaft flex will basically stay the same as it was at standard length. The butt end of the shaft is the stiffest end and you are extending the length at the butt end. The increase in swingweight will be offset by the stiffness added by extending at the stiffest end (butt end) of the shaft.
Answered by: JimY
Date published: 2017-05-08

how are you looking for inquires about your iron shafts. the R300 #1 i need regular shafts but i need diffeent lengths. I am re shafting 4 through pitching wedge with standard lengths. could u help me and point me in the right direction as far as lengths?

Asked by: kellan
For taper tip .355 Dynamic Gold R 300 shafts, you would order the 39.5" for the #4 iron, 39" for the #5 iron, 38.5" for the #6 iron, 38" for the #7 iron, 37.5" for the #8 iron, and 37" for the #9 and PW. No tip trimming on .355 taper tip shaft. After installation, trim to your final playing length from the butt end.
Answered by: GW2002
Date published: 2017-04-27

Will this shaft fit in Taylor made irons?

Asked by: Doyle
It depends on which Taylor Made irons you have. Taylor Made uses .355" tip size shafts in all their TP models but .370" tip sizes in most of their other models. You can look up your irons at this link. https://www.golfworks.com/images/art/TaylorMade.pdf
Answered by: JimY
Date published: 2017-04-17

I have on back order a dynamic gold 41" X100 shaft I would like to know what shaft should I go to for a reg flex

Asked by: Joe F
If you like the weight of the Dynamic Gold you could use the R300 (DGI) or if you wanted a lighter weight but the same playing characteristics you could use the Dynamic Gold SL R300 (TT2016).
Answered by: JimY
Date published: 2017-04-12

Play a 300 forge taylormade iron now . Driver distance about to 230 -235 level ground .shaft is 6.0 flighted. Purchased x tour cal. With s300  how do they compare?

Asked by: Former scratch
The 6.0 Flighted Rifle is approximately a half a flex stiffer then the DG S300. The Flighted Rifle shafts were initially created to match the trajectories of the DG taper tip shafts for the tour pro's. The Flighted Rifle shaft also has a higher balance point then the DG S300 which can change the balance and feel.
Answered by: JimY
Date published: 2017-04-05

Its been along time since I reshafted my irons, I have an older set of Wilson Tour blades. The are bore through, what size and type of tip do they require

Asked by: John
It depends on just how old these are but more then likely these would be a .355" taper tip. The older original "Fluid Feel" irons from the 60's and 70's used a .340" taper tip shaft.
Answered by: JimY
Date published: 2017-03-27

Do the .355 tapers have progressive weighting or profiles in any like the DG Pros? Or does the taper just prevent one from having to tip trim? Thanks in advance.

Asked by: Devon
The DGI Dnamic Gold irons are constant weight. The DG Pro's and the AMT's are progressive weight designs. The DGI is a .355 taper tip design, not just for the reason of no tip trimming, but because many current and models of the past require a .355 taper tip design shaft.
Answered by: GW2002
Date published: 2017-03-23
  • y_2017, m_5, d_19, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_63
  • loc_en_US, sid_DGI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks