True Temper Dynamic Gold .370" Steel Iron Shafts

True Temper Dynamic Gold .370" Steel Iron Shafts


R300 Flex - 370 tip (41") 3C1M
$21.99
In Stock
S200 Flex - 370 tip (41") 3.5C1M
$21.99
In Stock
S300 Flex - 370 tip (41") 4C1M
$21.99
In Stock
S400 Flex - 370 tip (41") 4.5C1M
$21.99
In Stock
X100 Flex - 370 tip (41") 5C1M
$21.99
In Stock
X300 Flex - 370 tip (41") 5.5C1M
$21.99
Backordered
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Dynamic Gold .370" Steel Iron Shafts

The #1 shaft in golf. The True Temper Dynamic Gold is a high-flex, tour weighted steel iron shaft that is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

Features:
  • .370" tip diameter
  • Lightweight steel with a high bend point yielding a more tour preferred ball flight

Trimming Instructions

True Temper Dynamic Gold .370" Steel Iron Shafts is rated 5.0 out of 5 by 13.
Rated 5 out of 5 by from Accurate These shafts are the most accurate and consistant I've found. Been using them for over 20 years. I changed out my graphite shafts in my hybrid irons and woods (the hosel on my 3 wood hybrid takes a .370 diameter) for better online shots and consistant yardages. The only con is the extra wieght but the trade off for accuracy saves me a stroke or two per round!
Date published: 2010-07-17
Rated 5 out of 5 by from Accurate These shafts are the most accurate and consistant I've found. Been using them for over 20 years. I changed out my graphite shafts in my hybrid irons and woods (the hosel on my 3 wood hybrid takes a .370 diameter) for better online shots and consistant yardages. The only con is the extra wieght but the trade off for accuracy saves me a stroke or two per round!
Date published: 2010-07-17
Rated 5 out of 5 by from Finally Well i got a shaft that works with my Maltby TE irons. If you think the X300 is a telephone pole your wrong. Med high ball flight, soft good feel with spin. I was nervous at first by thinking they would be to stiff but they are the best shaft i hit so far.
Date published: 2015-03-28
Rated 5 out of 5 by from good service I am new at installing shafts but with the product and the good directions included, it was easy. The new shaft does make a difference, although I am at best a poor player.
Date published: 2016-07-07
Rated 5 out of 5 by from True to to True Temperor reputation Bought this to repair a friend's club who is very serious about his game. Told me he wanted the best, that's why I got him True Temper. He loves it.
Date published: 2017-07-24
Rated 5 out of 5 by from Tru temper shafts The ship time was not long and everything I ordered was caoorect. Everything worked and was what it was suppose to be
Date published: 2017-03-14
Rated 5 out of 5 by from Great shaft Got a S400 for my 1 iron, the lower trajectory has added about 10 yards. Couldn't be happier.
Date published: 2017-08-01
Rated 5 out of 5 by from SOLID I've been using True Temper shafts for years....penetrating ball flight feel very solid.
Date published: 2015-09-07
  • y_2017, m_10, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_UDGI, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Broke the shaft in my Ping Eye2 wedge has .370" tip. Would the True Temper S300 be a good replacement? The label on the Ping shaft has KT-Shaft. Thanks

Asked by: hss
Ping always used .355" taper tip shafts in the Ping Eye 2 irons and the KT shaft was a .355" taper tip shaft. If you are measuring the shaft above the top edge of the hosel it will measure in the .370" range because .355" taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel. The DGI 37" shaft would be the Dynamic Gold wedge shaft that should fit this iron. The KT shaft was a lighter weight shaft in the same weight range as the TT Lite XL, which was always a popular replacement shaft for Ping (2XLI).
Answered by: JimY
Date published: 2017-10-09

I have snapped a couple of my Iron Shafts. They are True Temper GS75 S200 shafts. I cannot find these any more. Would the s200 here be a good replacement? Or anything else that would be closer? Thanks for your help!

Asked by: BKH
We no longer have the True Temper GS75 shafts available. I would recommend the True Temper XP95 (TT0113) as a better replacement then the Dynamic Gold based on the playing characteristics and weight. You would want the S300 flex. If you feel the Dynamic Gold could make a better replacement shaft for you it certainly can work well.
Answered by: JimY
Date published: 2017-10-02

I have the Wilson Staff Di7 Irons would like to re-shaft a 6 & 9 iron. The shafts in the clubs (as bought new) have the label True Temper TX-105 FS UNIFLEX. It is an over the hosel shaft and likely a .370 and cannot seem to find a replacement.

Asked by: Al Johnson
The True Temper TX-105 shafts were made exclusively for Wilson and they are larger than a .370" tip diameter. In looking at pictures these appear to be a Fat Shaft design and some of those were as big as .500" tip size. There are no aftermarket shafts to fit these irons. You will likely have to send these back to Wilson for reshafting.
Answered by: JimY
Date published: 2017-10-02

Replacing the shaft in a Taylormade M2 7 iron. Will the  TT Gold X300 be a good choice and how much do I trim off of the tip? Club has a high launch 88 TM shaft in it now.

Asked by: Larryf
The UDGI X300 will fit the M2 7 iron but it is a totally different shaft then the stock 88 gram weight shaft that is stock in the M2 irons. If you want a shaft that matches up to the stock shaft the True Temper XP95 (TT0113) would be the closest match we have. The DG X300 is a very stiff flex shaft. https://www.golfworks.com/true-temper-dynamic-gold-xp95-steel-iron-shafts/p/TT0113/
Answered by: JimY
Date published: 2017-09-18

On the DGS300 .370 parallel shafts, what would I tip them to make the 3-8 irons stiff? Of course butt cutting to length after installation. I'm thinking of trying to lower my trajectory with these shafts. Weight is not a issue.

Asked by: slmealor
The UDGI S300 is a 41" .370" parallel tip stiff shaft. You will need to tip cut for the 3 through 8 irons per the recommended instructions (IR2) and then butt cut to the clubs finished length. The Dynamic Gold shaft is designed to produce a lower ball flight. https://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2017-07-17

When installing the DGS300 in 3-7 irons, would I tip trim for stiff before butt cutting to length or just install factory's tip and but cut to length. DGS300 would be stiff as is, right? Thinking about trying to shaft my way to a lower trajectory.

Asked by: slmealor
The UDGI S300 is a 41" .370" parallel tip stiff shaft. You will need to tip cut for the 3 through 7 irons per the recommended instructions (IR2) and then butt cut to the clubs finished length. The Dynamic Gold shaft is designed to produce a lower ball flight. https://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2017-07-17

Do I trim this tip? I am confused as comments say UDGI should not be trimmed at tip, only butt trim. This is going into a 56 Degree wedge.

Asked by: Scott
The UDGI is a .370 parallel tip shaft with a trim code of IR2, which does call for tip trimming. For a wedge, you would trim 4.5" from the tip, then butt cut to final playing length after assembly. The DGI is a taper tip .355 and has a trim code of IR1, which indicates no tip trim. If you are sure you have the UDGI, then you do tip trim as mentioned above.
Answered by: GW2002
Date published: 2017-07-14

What is the difference between the S300 - S400 and the X100. Each one stiffer then the last?

Asked by: slmealor
The S400 weights 2 grams heavier then the S300 and will generally test 2 cpm's stiffer in a frequency machine. With Dynamic Gold shafts 15 cpm's is a change of flex. True Temper sorted the Dynamic Gold shafts by weight. The X100 weights the same as the S300 but tests and plays to an Extra Stiff flex and is generally in the 12 to 13 cpm's stiffer then the S300.
Answered by: JimY
Date published: 2017-07-12
  • y_2017, m_10, d_15, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_41
  • loc_en_US, sid_UDGI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks