True Temper Dynamic Gold Spinner + Wedge Shaft

True Temper Dynamic Gold Spinner + Wedge Shaft


Wedge+ 37" - .355" tip (131g) 4B1H
$21.99
In Stock
Wedge 37" - .355" tip (124g) 3B1H
$21.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Dynamic Gold Spinner + Wedge Shaft

Features:
  • Designed with a revolutionary 3 section below the grip that creates an optimal bending profile for increased spin and lower launch angle.
  • 2 versions (Wedge & Wedge+) for SW/LW and PW/GW applications.
  • Reduces launch angles as much as 2-3 degrees while increasing spin rates by as much as 500+ rpm.
  • .355 tip only

Trimming Instructions

True Temper Shaft Specifications

True Temper Dynamic Gold Spinner + Wedge Shaft is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from As Advertised! Put DG Spinner Wedge+ in 52/56/60 degree Titliest SM5 wedges, as well as my 46 degree Titleist AP1 714. Tremendous, performs as advertised and while I haven't been on a monitor to measure the RPM gain, it's noticeable and manageable. Perfect for my game. Cost effective as well, cannot say enough good things about this setup!
Date published: 2016-05-04
Rated 4 out of 5 by from A good wedgie I enjoy building my own clubs. I was shopping for both a 56 and 69*. The reviews on these big bounce heads are very positive. I assembled using spinner shafts. Keep in mind the wide sole makes for a heavier swing weight but I like my wedges to swing on the heavy side. First few times out and my wedge play shows immediate improvement. More confidence = better results. I recommend these heads.
Date published: 2016-11-08
Rated 5 out of 5 by from Should be called the super spinner So excited to be rid of the DG S300 in my wedges. When swung correctly these shafts will cut ball flight in half and that ball will dance. So much fun being able to throw the ball past the whole again
Date published: 2017-09-07
  • y_2017, m_10, d_23, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_TT0072, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Flex?

Asked by: Shamus
True Temper only lists them as a Wedge and Wedge + flex and the Wedge + is stiffer. In comparing the shaft profile data from the Spinner shafts to other wedge shafts I would put the Wedge flex as an R flex and the Wedge + as an S flex.
Answered by: JimY
Date published: 2017-10-09

Hi, Do the spinner wedge shafts have taper tip version

Asked by: Jeff
The DG Spinner is only available with a .355" taper tip. They do not make a .370" parallel tip version of this shaft.
Answered by: JimY
Date published: 2017-08-12
  • y_2017, m_10, d_23, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_TT0072, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks