True Temper Dynamic Gold Spinner Wedge Shafts

True Temper Dynamic Gold Spinner Wedge Shafts


Wedge 37" - .355" tip (124g) 3B1H
$21.99
In Stock
Wedge+ 37" - .355" tip (131g) 4B1H
$21.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

True Temper Dynamic Gold Spinner Wedge Shafts

Features:
  • Designed with a revolutionary 3 section below the grip that creates an optimal bending profile for increased spin and lower launch angle.
  • 2 versions (Wedge & Wedge+) for SW/LW and PW/GW applications.
  • Reduces launch angles as much as 2-3 degrees while increasing spin rates by as much as 500+ rpm.
  • .355 tip only

Trimming Instructions

True Temper Shaft Specifications

True Temper Dynamic Gold Spinner Wedge Shafts is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Spinner Guilt Oh how sweet it is!! I tried these shafts at the Golfworks Pro Shop on there Virtual Fitting Machine and the results speak ffor themselves. True temper S300 w/ 50* wedge @ 6000RPM's True temper spinner w/ 50* wedge @ 9000+ RPM's, unbelievable??? Believe It!!
Date published: 2011-03-23
Rated 5 out of 5 by from Look at me I'm spinnin I put these shafts on my Tricept MG wedge heads, now I'm a believer! Stop on a dime pitch shots inside of 60yds. Taken my short game to a new level.
Date published: 2015-08-04
Rated 5 out of 5 by from Spinner Guilt Oh how sweet it is!! I tried these shafts at the Golfworks Pro Shop on there Virtual Fitting Machine and the results speak ffor themselves. True temper S300 w/ 50* wedge @ 6000RPM's True temper spinner w/ 50* wedge @ 9000+ RPM's, unbelievable??? Believe It!!
Date published: 2011-03-23
Rated 5 out of 5 by from Shaft plus I bought this wedge shaft to use in my 60 degree wedge. I was surprised that my shaft came with a sensicore insert already installed. Pitched in for birdie with the first shot with this shaft.
Date published: 2016-02-26
Rated 5 out of 5 by from Great shafts! Re-shafted gap, sand and lob wedges. First play this morning, flights lower as expected. Really fun spin rate with stops on a dime characteristics. Very satisfying.
Date published: 2017-10-16
Rated 5 out of 5 by from nice feel tried it for the last 2 weeks and like the performance
Date published: 2016-03-22
  • y_2017, m_11, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_TT0071, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will your true temper gold spinner .355" shaft fit into the hosel of my ping G-30 Sand wedge?

Asked by: Marvin
Yes the .355" taper tip DG Spinner shaft will fit the Ping G-30 sandwedge.
Answered by: JimY
Date published: 2017-10-23

does this shaft come in a 370 tip?

Asked by: chris
No, the Dynamic Gold Spinner Wedge shafts are not manufactured in a .370" parallel tip. You can use our SHIMT (.355" - .370") shim for properly installing the Spinner shaft into a .370" hosel bore. https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2017-10-13

If ordered can I receive my shaft spine aligned not pured?

Asked by: Armystrong1000
No, we do not offer Spine Alignment for shafts, just SST Puring.
Answered by: JimY
Date published: 2017-09-20

I assume these shafts are trimk butt to length only. Am I correct in assuming that?

Asked by: Armystrong1000
Yes the DG Spinner shafts are installed and butt cut to the finished playing length. You do not trip trim these shafts.
Answered by: JimY
Date published: 2017-07-10

I see the Spinner shaft should be used for 56 and 60, while the Spinner+ is for 52 and 48. The natural question is which for a 54 degree head?

Asked by: boonie26
You could use either one in a 54 degree or for that matter you could use the same one in wedges from 48 to 60 degrees lofts or higher. It becomes a fitting preference.
Answered by: JimY
Date published: 2017-06-26

I'm looking to replace a broken shaft on a TaylorMade Rocketbladez PW - Steel 85G Rocketfuel S Flex Shaft. What is the closest thing to the original you have. PS I don't need anything special, currently learning the game.

Asked by: Crobar
The Taylor Made steel shafts are made by FST and a shaft like the FST 115 (FS0012) could work well. It will be heavier in weight but we do not have a shaft in the 85 gram range available in an S flex. The closest in weight in an S flex would be the True Temper XP 95 (TT0113). https://www.golfworks.com/search.asp?ss=fs0112 https://www.golfworks.com/true-temper-dynamic-gold-xp95-steel-iron-shafts/p/TT0113/
Answered by: JimY
Date published: 2017-04-25

what is butt end measurement for spinner wedge shaft?

Asked by: ken
.600" butt diameter. At this link if you scroll down the page you will see the specification box with this information for this shaft. https://www.golfworks.com/true-temper-dynamic-gold-spinner-wedge-shafts/p/TT0071/
Answered by: JimY
Date published: 2017-02-15

I am reshafting a Titleist BV wedge for a friend. He wants a stiff shaft. Your "spinner wedge shafts" are listed as "wedge flex".  How does this compare to usual flex designations?

Asked by: Bobcat
When I compare the Spinner Wedge shaft to other wedge specific shafts it more closely matches to the R flex of and the Spinner Wedge+ to the S flex of shafts that have similar playing characteristics.
Answered by: JimY
Date published: 2017-02-06
  • y_2017, m_11, d_17, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_TT0071, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks